HYDAC FILTER SYSTEMS FMM-P-S Manual de usuario
FMM-P-S
FMM-P-M
FluidMonitoring Module
Installation and Maintenance Instructions
English (translation of original instructions)
Documentation no.: 3866049a
(Valid from series no.: 0002S01827N0000401)
Imprint
FMM-P-S / FMM-P-M en(us) Page 2 / 40
MoWa FMM-P-x 3866049a en(us) 2013-09-17 2013-09-17
Imprint
Publisher and responsible for the content:
HYDAC FILTER SYSTEMS GMBH
Postfach 1251
66273 Sulzbach / Saarland
Germany
Telephone: +49 (0)6897 509 01
Telefax: +49 (0)6897 509 846
Homepage: www.hydac.com
Court of Registration: Saarbrücken, HRB 17216
Executive director: Mathias Dieter,
Dipl.Kfm. Wolfgang Haering
Documentation Representative
Mr. Günter Harge
c/o HYDAC International GmbH, Industriegebiet, 66280 Sulzbach / Saar
Telephone: ++49 (0)6897 509 1511
Telefax: ++49 (0)6897 509 1394
© HYDAC FILTER SYSTEMS GMBH
All rights reserved. No part of this work may be reproduced in any form (print,
photocopy or by other means) or processed, duplicated or distributed using
electronic systems without the written consent of the publisher.
These documents have been created and inspected with the greatest care.
However, errors cannot be ruled out completely.
All details are subject to technical modifications. The content of this manual is
subject to change without notice.
Documentation Representative
FMM-P-S / FMM-P-M en(us) Page 3 / 40
MoWa FMM-P-x 3866049a en(us) 2013-09-17 2013-09-17
Content
Imprint............................................................................................................2
Documentation Representative ...................................................................2
Preface...........................................................................................................5
Customer service.........................................................................................6
Modifications to the Product ........................................................................6
Warranty ......................................................................................................6
Using the documentation .............................................................................7
Safety Information and Instructions............................................................8
Hazard symbols...........................................................................................8
Signal words and their meaning in the safety information and
instructions ..................................................................................................9
Structure of the safety information and instructions...................................10
Observe regulatory information .................................................................10
Proper/Designated Use .............................................................................11
FMM-P-x-0-CS1xx0................................................................................11
FMM-P-x-1-CS1xx1................................................................................11
Improper Use or Use Deviating from Intended Use ...................................12
Qualifications of personnel / target group ..................................................13
Unpacking the FMM ....................................................................................14
Storing the FMM..........................................................................................14
Decoding the model code label .................................................................15
Checking the scope of delivery .................................................................16
FMM Features..............................................................................................17
Components ..............................................................................................18
FMM-P-S-… ..............................................................................................18
FMM-P-M-…..............................................................................................19
Dimensions..................................................................................................20
FMM-P-S-… ..............................................................................................20
FMM-P-M with AS1000..............................................................................21
FMM-P-M with AS3000..............................................................................22
FMM-P-M with HydacLab ..........................................................................23
Hydraulic diagram.......................................................................................24
Documentation Representative
FMM-P-S / FMM-P-M en(us) Page 4 / 40
MoWa FMM-P-x 3866049a en(us) 2013-09-17 2013-09-17
FMM-P-S-… ..............................................................................................24
FMM-P-M-…..............................................................................................24
Installing the FMM.......................................................................................25
Attaching the FMM-P-S .............................................................................26
Attaching the FMM-P-M.............................................................................27
Hydraulic connection of the FMM..............................................................28
Connecting FMM with the hydraulic system ...........................................29
Error messages / Troubleshooting............................................................30
Performing Maintenance ............................................................................31
Changing the Filter Element ......................................................................31
Decommissioning the FMM........................................................................32
Disposing of the FMM.................................................................................32
Contact/Service...........................................................................................33
Ersatzteile / Zubehör...................................................................................34
Spare Parts................................................................................................34
Accessories ...............................................................................................35
Technical data.............................................................................................36
Model Code..................................................................................................37
Index ............................................................................................................38
Documentation Representative
FMM-P-S / FMM-P-M en(us) Page 5 / 40
MoWa FMM-P-x 3866049a en(us) 2013-09-17 2013-09-17
Preface
For you, as the owner of a product manufactured by us, we have produced
this manual, comprising the most important instructions for its operation and
maintenance.
It is intended to help you become acquainted with the ins and outs of the
product and use it properly.
You should keep it in the vicinity of the product so it is always at your
fingertips.
Note that the information on the unit's engineering contained in the
documentation was that available at the time of publication.Consequently,
there might be deviations in technical details, figures and dimensions.
If you discover errors while reading the documentation or have suggestions
or other useful information, please don’t hesitate to contact us:
HYDAC FILTER SYSTEMS GMBH
Technische Dokumentation
Postfach 12 51
66273 Sulzbach / Saar
Germany
We look forward to receiving your input.
“Putting experience into practice”
Documentation Representative
FMM-P-S / FMM-P-M en(us) Page 6 / 40
MoWa FMM-P-x 3866049a en(us) 2013-09-17 2013-09-17
Customer service
If you have any questions, suggestions, or encounter any problems of a
technical nature, please don't hesitate to contact us. When contacting us,
always include the model/type designation, serial no. and part-no. of the
product:
Telefax: ++49 (0) 6897 / 509 - 846
Modifications to the Product
We would like to point out that changes to the product (e.g. purchasing
additional options, etc.) may mean that the information in the operating
instructions is no longer applicable or adequate.
After modification or repair work that affects the safety of the product has
been carried out on components, the product may not be returned to
operation until it has been checked and released by a HYDAC technician.
Please notify us immediately of any modifications made to the product
whether by you or a third party.
Warranty
For the warranty provided by us, please refer to the General Terms of Sale
and Delivery of HYDAC FILTER SYSTEMS GMBH.
You will find this at www.hydac.com -> Legal information.
Documentation Representative
FMM-P-S / FMM-P-M en(us) Page 7 / 40
MoWa FMM-P-x 3866049a en(us) 2013-09-17 2013-09-17
Using the documentation
Please note that the method described above of locating specific
information does not release you from your responsibility for
carefully reading the entire manual prior to starting the unit up for
the first time and carefully rereading the manual at regular
intervals later on.
What do I want to know?
I determine which topic I am looking for.
Where can I find the information I’m looking for?
The documentation has a table of contents at the beginning. There, I
select the chapter I'm looking for and the corresponding page number.
The documentation number with its index enables you to order another copy
of the operating and maintenance instructions. The index number is
incremented upward by one number every time the manual is revised or
changed.
Chapter description
Page number
Edition date
Document language
Documentation no.
with index/
file name
Safety Information and Instructions
FMM-P-S / FMM-P-M en(us) Page 8 / 40
MoWa FMM-P-x 3866049a en(us) 2013-09-17 2013-09-17
Safety Information and Instructions
The module was built according to the statutory provisions valid at the time of
delivery and satisfies current safety requirements.
Any residual hazards are indicated by safety information and instructions and
are described in the operating instructions.
Observe all safety and warning instructions attached to the module. They
must always be complete and legible.
Do not operate the module unless all the safety devices are present.
Secure the hazardous areas which may arise between the module and other
equipment.
Maintain the unit inspection intervals prescribed by law.
Document the results in an inspection certificate and keep it until the next
inspection.
Hazard symbols
These symbols are listed for all safety information and instructions in these
operating instructions which indicate particular hazards to persons, property
or the environment.
Observe these instructions and act with particular caution in such cases.
Pass all safety information and instructions on to other users.
General hazard
Danger due to operating pressure
Risk of burns due to hot surfaces
Safety Information and Instructions
FMM-P-S / FMM-P-M en(us) Page 9 / 40
MoWa FMM-P-x 3866049a en(us) 2013-09-17 2013-09-17
Signal words and their meaning in the safety information and
instructions
DANGER
DANGER indicates a danger with a high risk and which will lead to death or
serious injury if not avoided.
WARNING
WARNING indicates a danger with a medium risk and which can lead to
death or serious injury if not avoided.
CAUTION
CAUTION indicates a danger with a low risk and which can lead to minor
injury if not avoided.
NOTICE
NOTICE indicates a danger which will lead to damage to property if not
avoided.
Safety Information and Instructions
FMM-P-S / FMM-P-M en(us) Page 10 / 40
MoWa FMM-P-x 3866049a en(us) 2013-09-17 2013-09-17
Structure of the safety information and instructions
All warning instructions in this manual are highlighted with pictograms and
signal words. The pictogram and the signal word indicate the severity of the
danger.
Warning instructions listed before an activity are laid out as follows:
SIGNAL WORD
Type and source of danger
Consequence of the danger
HAZARD SYMBOL
►Measures to avert danger
Observe regulatory information
Also observe the following regulatory information and guidelines:
Legal and local regulations for accident prevention
Legal and local regulations for environmental protection
Country-specific regulations, organization-specific regulations
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Unidad de control de HYDAC FILTER SYSTEMS
HYDAC FILTER SYSTEMS
HYDAC FILTER SYSTEMS FluidControl FCU 8111 Manual
HYDAC FILTER SYSTEMS
HYDAC FILTER SYSTEMS FCU 1210 Manual
HYDAC FILTER SYSTEMS
HYDAC FILTER SYSTEMS FCU 2000-4 Series Manual
HYDAC FILTER SYSTEMS
HYDAC FILTER SYSTEMS LOGO! TDE Manual de usuario
HYDAC FILTER SYSTEMS
HYDAC FILTER SYSTEMS CSM 1000 Series Manual de usuario
HYDAC FILTER SYSTEMS
HYDAC FILTER SYSTEMS CTM-EF Manual
HYDAC FILTER SYSTEMS
HYDAC FILTER SYSTEMS CTM-EF 3 3 Series Manual
HYDAC FILTER SYSTEMS
HYDAC FILTER SYSTEMS CTM-EB 1000 Series Manual
HYDAC FILTER SYSTEMS
HYDAC FILTER SYSTEMS FMM-A-S Series Manual de usuario
HYDAC FILTER SYSTEMS
HYDAC FILTER SYSTEMS FMM-A-S Series Manual de usuario
Manuales populares de Unidad de control de otras marcas
Festo
Festo Compact Performance CP-FB6-E Manual de lista de piezas
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manual de usuario
JS Automation
JS Automation MPC3034A Manual de usuario
JAUDT
JAUDT SW GII 6406 Series Guía rápida
Spektrum
Spektrum Air Module System Manual de usuario
BOC Edwards
BOC Edwards Q Series Manual de usuario
