HYCON HY16F3910 Series Instrucciones de uso
© 2022 HYCON Technology Corp.
www.hycontek.com
APD-HY16F39IDE003-V02_EN
HY16F3910 Series
IDE Hardware User’s Manual
.
HY16F3910
IDE Hardware User’s Manual
© 2022 HYCON Technology Corp
www.hycontek.com
APD-HY16F39IDE003-V02_EN
page2
Table of Contents
1.
PACKAGE CONTENTS............................................................................................................................ 4
2.
SAFETY PRECAUTIONS ......................................................................................................................... 5
3.
SOFTWARE INSTALLATION REQUIREMENTS..................................................................................... 6
3.1.
IDE Software Installation Requirements ............................................................................................... 6
4.
DESCRIPTION OF THE HARDWARE TOOL .......................................................................................... 7
4.1.
Architecture desription .......................................................................................................................... 7
4.2.
HY16F Mini Link Debug Tool Introduction............................................................................................. 7
4.3.
Introduction to Target Board.................................................................................................................. 9
4.4.
Target Board Circuit Diagram.............................................................................................................. 12
4.5.
LCD Board Introduction ...................................................................................................................... 13
4.6.
HY16F Mini Link Debug Tool and Target Board Hardware Connection Steps ................................... 16
5.
HARDWARE CONNECTION INTRODUCTION ..................................................................................... 17
6.
REVISIONS ............................................................................................................................................. 18
.
HY16F3910
IDE Hardware User’s Manual
© 2022 HYCON Technology Corp
www.hycontek.com
APD-HY16F39IDE003-V02_EN
page3
Attention:
1、HYCON Technology Corp. reserves the right to change the content of this datasheet
without further notice. For most up-to-date information, please constantly visit our
website: http://www.hycontek.com .
2、HYCON Technology Corp. is not responsible for problems caused by figures or
application circuits narrated herein whose related industrial properties belong to third
parties.
3、Specifications of any HYCON Technology Corp. products detailed or contained herein
stipulate the performance, characteristics, and functions of the specified products in the
independent state. We does not guarantee of the performance, characteristics, and
functions of the specified products as placed in the customer’s products or equipment.
Constant and sufficient verification and evaluation is highly advised.
4、Please note the operating conditions of input voltage, output voltage and load current
and ensure the IC internal power consumption does not exceed that of package
tolerance. HYCON Technology Corp. assumes no responsibility for equipment failures
that resulted from using products at values that exceed, even momentarily, rated values
listed in products specifications of HYCON products specified herein.
5、Notwithstanding this product has built-in ESD protection circuit, please do not exert
excessive static electricity to protection circuit.
6、Products specified or contained herein cannot be employed in applications which
require extremely high levels of reliability, such as device or equipment affecting the
human body, health/medical equipments, security systems, or any apparatus installed in
aircrafts and other vehicles.
7
、
Despite the fact that HYCON Technology Corp. endeavors to enhance product quality
as well as reliability in every possible way, failure or malfunction of semiconductor
products may happen. Hence, users are strongly recommended to comply with safety
design including redundancy and fire-precaution equipments to prevent any accidents
and fires that may follow.
8
、
Use of the information described herein for other purposes and/or reproduction or
copying without the permission of HYCON Technology Corp. is strictly prohibited
.
.
HY16F3910
IDE Hardware User’s Manual
© 2022 HYCON Technology Corp
www.hycontek.com
APD-HY16F39IDE003-V02_EN
page4
1. Package Contents
HY16F3910-DK01 Hardware development kit includes HY16F3910-N088 Target Board
and HY16F Mini Link Debug Tool(refer to table 1-1).
Integrated Hardware development kit helps to develop MCU application program of
HY16F3910 Series. Program compiling, hardware debug, IC programming was
implemented through NB/PC end connection. This user’s manual mainly introduces the IDE
hardware development tool, the related hardware is equipped as shown below:
Model No. Part Name Description Quantity
HY16F3910-DK01
1.HY16F3910-IM01 HY16F3910-N088 Target Board
1
2.HY16000-CM04 HY16F Mini Link Debug Tool 1
3.HY10000-AM01 LCD Board
(3.0V, 4COM x 17SEG) 1
4.Cable line USB Type A to Mini B cable 1
5.EDM line 5pin to 5 pin (2.54mm pitch) 1
Table 1-1
.
HY16F3910
IDE Hardware User’s Manual
© 2022 HYCON Technology Corp
www.hycontek.com
APD-HY16F39IDE003-V02_EN
page5
2. Safety Precautions
Do not place heavy objects on the display panel, in order to avoid damage caused by
stress.
Place the application display boards at steady place, so as to avoid falling damage.
Do not use this product with the input voltage which is not meeting the electrical
specifications, , in order to avoid working abnormally or damage
Avoid application display boards being touched by liquid, dirt and avoid being exposed
to moisture during operation. This application should be kept in a dry environment, so
as not to affect the function and performance
Remove the power supply when not using it.
When following status occurred, please remove the power supply immediately, and
contact our engineer.
Power Supply line is worn or damaged.
Power source (battery) connected but no any light on while operating.
Component off.
.
HY16F3910
IDE Hardware User’s Manual
© 2022 HYCON Technology Corp
www.hycontek.com
APD-HY16F39IDE003-V02_EN
page6
3. Software Installation Requirements
3.1. IDE Software Installation Requirements
Minimum System Requirements of operating AndeSight RDS IDE:
(1) PC/NB hardware requirement:
IBM PC compatible X86 system CPU
4GB DDR Memory
8GB HD Hard Disk Drive Capacity
(2) Supported Products:
HY16F3910 Series
(3) Supported Hardware Model No.:
HY16F3910-DK01: HY16F3910 hardware development kit.
(4) Supported software version:
AndeSightV3.2.1RDS above
HYCON 32-bit MCU Device V0.34 above
(5) Supported Operating system:
Windows XP (32-Bit System), Windows 7(32/64-Bit System), Windows 8(32/64-Bit
System), Windows 10(32/64-Bit System).
(6) Apply the following interface modes:
USB Port with libusb-win32 device
HY16F Mini Link Debug Tool 's USB Port driver uses the Windows general USB
device driver.(Figure 3-1)
Figure 3-1
.
HY16F3910
IDE Hardware User’s Manual
© 2022 HYCON Technology Corp
www.hycontek.com
APD-HY16F39IDE003-V02_EN
page7
4. Description of the hardware tool
4.1. Architecture description
HY16F Mini Link Debug Tool(ICE) is a control device between the HY163910-N088 Target
Board and AndeSight RDS IDE software.
Program compiling, software debug, hardware debug, IC programming was implemented
through NB/PC end connection.
Figure 4-1
Note: EDM is Embedded Debug Module
4.2. HY16F Mini Link Debug Tool Introduction
HY16F Mini Link Debug Tool (model:HY16000-CM04) is universal for HY16F series
products (as shown in Figure 4-2), the following is the introduction of the HY16F Mini Link
Debug Tool:
EDM control
Port
USB Port
Power LED Error LED
Active LED
Figure 4-2
(1) Power LED
Function: Power LED (Green LED)
Description: When the USB Port is connected to a computer or an external 5V power
supply, the light indicates that the Control Box is powered.
.
HY16F3910
IDE Hardware User’s Manual
© 2022 HYCON Technology Corp
www.hycontek.com
APD-HY16F39IDE003-V02_EN
page8
(2) Active LED
Function: Active LED (Yellow LED)
Description: When entering Debug mode, the Active LED keeps flashing.
(3) Error LED
Function: Error LED (Red LED)
Description: When the USB Port is connected to a computer or an external 5V power
supply, but the EDM control port is not connected to Target Board, the
Error LED will light on.
(4) USB Port
Function: USB Port
Description: Mini B Cable connector
(5) EDM control Port
Function: EDM control communication interface port , used to connect with the EDM
interface of the Target Board to control the chip.
Description: The function is defined as follows
Name Description
RST RST Pin, connected to the RST pin of the HY16F3910.
VDD
VDD Pin, connected to the VDD5V pin of the HY16F3910.
Note: HY16F Mini Link Debug Tool fixed output 3.3V with 200mA
power supply.
ECK EDM Clock Pin, connected to the ECK pin of the HY16F3910.
EDIO EDM
Data Input / Output Pin, connected to the EDIO pin of the
HY16F3910.
VSS Ground Pin, connected to the VSS pin of the HY16F3910.
.
HY16F3910
IDE Hardware User’s Manual
© 2022 HYCON Technology Corp
www.hycontek.com
APD-HY16F39IDE003-V02_EN
page9
4.3. Introduction to Target Board
The Target Board (model: HY16F3910-IM01) is commonly used for HY16F3910 series
products (Figure 4-3) and demonstrate the function of HY16F3910.
The following describes the appearance and functions of the Target board:
J2
U1
J3
J5
J1
JP1
LOAD
CELL
Pin 1
Figure 4-3
(1) U1
Function: Target Board Chip, called HY16F3910 (Part No: HY16F3910-N088).
(2) J1
Function:SPIPWR Power Source Selection.
When J1’s pin1-2 are shorted together, the SPIPWR Powered by PWR.
Description:Pin are defined as follows
Name Pin Name
SPIPWR 1 2 PWR
.
HY16F3910
IDE Hardware User’s Manual
© 2022 HYCON Technology Corp
www.hycontek.com
APD-HY16F39IDE003-V02_EN
page10
(3) J2
Function: Target Board Chip’s LCD port.
Description: Pin are defined as follows
Name Pin Name
COM0 1 2 COM1
COM2 3 4 COM3
SEG0 5 6 SEG1
SEG2 7 8 SEG3
SEG4 9 10 SEG5
SEG6 11 12 SEG7
SEG8 13 14 SEG9
SEG10 15 16 SEG11
SEG12 17 18 SEG13
SEG14 19 20 SEG15
SEG16 21 22 SEG17
SEG18 23 24 SEG19
SEG20 25 26 SEG21
SEG22 27 28 SEG23
SEG24 29 30 SEG25
SEG26 31 32 SEG27
SEG28 33 34 SEG29
SEG30 35 36 SEG31
SEG32 37 38 SEG33
SEG34 39 40 SEG35
SEG36 41 42 SEG37
SEG38 43 44 SEG39
SEG40 45 46 SEG41
SEG42 47 48 SEG43
(4) J3
Function: Target Board Chip’s Current measurement.
It can be used to measure chip current by ammeter.
Description: Pin are defined as follows
Name Pin Name
VDD5V 1 2 PWR
Note: When J3 pin is not used to measurement, keep the J3 pin shorted together.
.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Hardware de computadora de HYCON
Manuales populares de Hardware de computadora de otras marcas
EMC2
EMC2 VNX Series Manual del propietario
Panasonic
Panasonic DV0PM20105 Manual de usuario
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manual de usuario
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manual de usuario
Raidon
Raidon iT2300 Manual de usuario
National Instruments
National Instruments PXI-8186 Manual de usuario
