Overview
Thank you for purchasing a Rho Instantaneous Inline Water Heater. Available in 4.4 and 6.0
kW models, to be used for hand washing at a single basin. Instantaneous water heaters are
energy ecient as they only consume energy when in use, so have no standing losses. The
IN44 and IN60 models are mains pressure and the bare wire heating systems oer rapid
heat up times and a near instant supply of hot water.
Conrm that the ow rate and temperature performance is adequate for your application
using the tables provided. This appliance is intended for use with spray head taps with
removable M22/ M24 nozzles. Not suitable for use with thermostatic mixing valves or taps
or to supply a single lever mixer tap.
Please read and follow these instructions to ensure that installation and operation are as
simple and safe as possible.
Important Safety Points
2
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
The appliance should only be installed and maintained by a competent person in
accordance with any local electrical and plumbing regulations.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualied persons in order to avoid a hazard.
The appliance must be permanently connected to the electrical supply through an
appropriately rated isolating switch with a separation in all poles.
Only connect the appliance to an electrical supply that meets the specication
detailed on the rating label.
