Husky G4801S-US Manual de usuario

THANK YOU

We appreciate the trust and confidence you have placed in Husky through the purchase of this workstation. We strive to continually create

quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.

Thank you for choosing Husky!

USE AND CARE GUIDE

Questions, problems, missing parts?

Before returning to the store, call

Husky Customer Service

8 a.m. - 5 p.m., EST, Monday - Friday

1-888-HD-HUSKY

WWW.HUSKYTOOLS.COM

Item # 1002 276 009

Model # G4801S-US

48 IN. WORKSTATION

Due to continuing improvements,

the actual product may differ slightly

from the product described herein.

Table of Contents

Safety Information

To reduce the risk of serious injury, read and follow the safety

instructions below before assembling and using this product.

□This product is intended for indoor use only.

□This product is not designed for commercial nor industrial usage.

WARNING: Keep the product on level surfaces. The

product could become unstable and it may tip over if stored

or moved on anuneven surface ,which may cause personal

injury, death or product damge.

WARNING: Any assembly or maintenance of the product

must be carried out by adults only.

WARNING: DO NOT stand on the product and do not use it

as scaffold.

WARNING: Use at least two people to move, assemble or

install this cabinet. Failure to do so can result in personal

injury or product damage.

CAUTION: DO NOT alter this product in any manner. For

example, do not weld external bar locks or attach electrical

equipment. This may cause product damage or personal

injury.

CAUTION: Check all nuts and bolts periodically for

tightness. When required, tighten them.

Table of Contents

Safety Information

Pre-Installation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Warranty

Specifications

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Assembly

Drawer Removal

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Service Parts

Maintenance

Care and Cleaning

...................................

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CAUTION: DO NOT leave children unattended near this

product.

Warranty

Specifications

Maximum load for wood top

Maximum load for drawer

Maximum load for pegboard

Maximum total load

1500 lbs. / 680.3 kg

100 lbs. / 45.4 kg

75 lbs. / 34 kg

1675 lbs. / 759.7 kg

This full warranty gives you specific rights, and you may also have other rights, which vary state to state.

Contact the customer service team at 1-888-HD-HUSKY or visit www.huskytools.com.

1 Year Limited Warranty for Solid Wood Top. This warranty excludes incidental/inconsequential damages and failures due to misuse,

abuse or normal wear and tear.

Pre-Installation

TOOLS REQUIRED

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

Part

Description

Quantity

M6 x 16 hex socket head screw

Wood top

M4 x 5 Phillips head bolt

M4 x 6 Phillips pan head tapping bolt

Left bench leg

Front stiffener

Left slide

Back stiffener

Right side bracket

Hex Wrench

(Hex Key)

Hex Screwdriver Bit Drill

(not included)

WWW.HUSKYTOOLS.COM

Please contact 1-888-HD-HUSKY for further assistance.

Gloves

(not included)

Adjustable foot

Right slide

Right bench leg

Pegboard

Left side bracket

PACKAGE CONTENTS

Phillips Screwdriver

(not included)

Drawer front panel

Drawer panel

NOTE:

to keep the product from being scratched during assembly.

Assemble on a flat surface. A piece of cardboard is recommended

Assembly

ATTACH THE BENCH LEGS AND BACK STIFFENERS

Please wear gloves during the whole assembly process.

NOTE:

at the top part and two at the bottom part.

The back side of the bench leg is the side with four holes, two

□

Attach the back stiffeners (H) to the back of the legs (B & I) with eight M6 x 16 hex socket head screws (AA). Tighten securely.

Tighten the screws for securely.the bench legs (B & I)

Inner side

Outer side

Assembly (continued)

Screw the adjustable feet (DD) into the bottom holes of the bench legs (B & I).

Slide the back clip of the outer rail of a left slide (C) into the back slot at the left bench leg’s (B) slide panel.

INSTALL THE SLIDES

INSTALL THE ADJUSTABLE FEET

Turn over the workbench frame.

Slide the front clip of the outer rail into the slot at the front of the bench leg’s side panel.

Fasten the slide to the bench leg by screwing two M4 x 5 Phillips head bolts (BB) through the bench leg’s outer

side to the slide. tighten securely

Repeat the same procedure to install the other left slide (C) to the left bench leg (B) and two right slides (F) to

the right bench leg (I).

WWW.HUSKYTOOLS.COM

Please contact 1-888-HD-HUSKY for further assistance.

□

Front

Back

Left slide

Right slide

Assembly (continued)

4ASSEMBLE THE DRAWER

Step 1: Lay the drawer panel (E) on its bottom. The bottom side is the side with stiffeners.

NOTE:

bottom is protected before laying the drawer on its bottom.

Make sure your platform is free of debris or the drawer

Bottom Top

Step 2: .Bend up the side panels upright to 90°

Left side panel

Right side panel

During this process, insert the clips

at the two ends of the back panel into

the slots of the side panels.

Step 3: .Bend all the clips towards the back panel until they lean against the back panel

Right side panel

Back panel

Left side panel

Back panel

Side panel

Assembly (continued)

Step 5: Turn up the drawer front panel (D) upright to 90°. Make sure the bottom bended edge of the drawer body is surrounded

by the bottom groove of the drawer front panel (D).

Step 6: Fasten the drawer front panel (D) and side panels together by screwing six M4 x 6 Phillips pan head tapping bolts (CC)

through the side panels to the drawer front panel (D).

5ASSEMBLE THE DRAWER (continued)

NOTE:

Please use Phillips screwdriver by hand.

Otherwise product damage may be caused.

At this step, DO NOT use power tool.

Lay down the drawer front panel (D) on its face with a soft mat underneath for protection.

Put the drawer body’s front section onto the drawer front panel (D).

□

Slide the drawer body’s front bottom bended edge into the bottom groove of the front panel (D).

□

Step 4:

WWW.HUSKYTOOLS.COM

Please contact 1-888-HD-HUSKY for further assistance.

Assembly (continued)

ATTACH THE DRAWER

Attach the drawer to the slides by sliding the slots at the drawer’s side panels onto the upright clips of the slides.

Secure the drawer to the slides by screwing eight M4 x 5 Phillips head bolts (BB) through the drawer to the slides.

□

Step 7: Bend inwards all the clips at the bottom of the drawer front panel (D) by 90° with the help of a screwdriver.

Assembly (continued)

ATTACH THE WOOD TOP

Attach the wood top (A) to the bench legs by screwing eight M6 x 16 hex socket head screws (AA) through the mounting

plates of the bench legs (B & I) to the two bottom sides of the wood top. Tighten securely.

□

NOTE:

on the top surface.

The back of the wood top is the part with rivet nuts

back

front

top

back

front

bottom

Back of wood top with eight

rivet nuts on top surface

7ATTACH THE FRONT STIFFENER

Attach the front stiffener (G) to the bench legs (B & I) with four M6 x 16 hex socket head screws (AA).

WWW.HUSKYTOOLS.COM

Please contact 1-888-HD-HUSKY for further assistance.

Assembly (continued)

TURN OVER THE BENCH

Close the drawer and turn over the bench.

9SECURE THE WOOD TOP

Turn over the bench with a soft mat underneath for protection.

□

Pull out the drawer completely.

□

Secure the wood top to the bench frame with four M6 x 16 hex socket head screws head (AA).

□

Tabla de contenidos

Otros manuales de Almacenamiento de herramientas de Husky

Husky

Husky H52CH6HD Manual de usuario

Husky

Husky HBR902490W5R Manual de usuario

Husky

Husky HOTC6010BB2M Manual de usuario

Husky

Husky H4CH1R Manual de usuario

Husky

Husky H42MWC8BLKTL Manual de usuario

Husky

Husky HOTC5209B21M Manual de usuario

Husky

Husky 1000000000 Manual de usuario

Husky

Husky HPRO63TLOCKERBL Manual de usuario

Husky

Husky H46PWRSTATION Manual de usuario

Husky

Husky N2R482478W5B Manual de usuario

Husky

Husky 1006402724 Manual de usuario

Husky

Husky HOTC8422BB1M Manual de usuario

Husky

Husky ERZ7824W-1 Manual de usuario

Husky

Husky H52CH6TR9HD Manual de usuario

Husky

Husky URP481878 Manual de usuario

Husky

Husky H72MWC10BLK-SC Manual de usuario

Husky

Husky H72MWC15R Manual de usuario

Husky

Husky HOTC6214B11MYS Manual de usuario

Husky

Husky H52CH6HDV4 Manual de usuario

Husky

Husky H27CH5TR4BGK Manual de usuario

Husky

Husky 410-027-0111 Manual de usuario

Husky

Husky HOAA52B11 Manual de usuario

Husky

Husky H61MWC15GWHD Manual de usuario

Husky

Husky HBR782478W4 Manual de usuario

Manuales populares de Almacenamiento de herramientas de otras marcas

Ryobi

Ryobi RWB03 Manual de usuario

Scheppach

Scheppach ts 2100 Manual de usuario

Cornwell Tools

Cornwell Tools CTB360AKBK Manual de usuario

DIVERSIFIED WOODCRAFTS

DIVERSIFIED WOODCRAFTS SHAIN GSB-6024 Manual de usuario

Cassese

Cassese CS200 CART Manual de usuario

Kendall Howard

Kendall Howard ESDW-9630-1000 Manual de usuario

Lista

Lista Align Instrucciones de montaje

Workzone

Workzone 99609 Manual de usuario

Stanley

Stanley STST83800-1 Manual de usuario

Homak

Homak PROFESSIONAL Series Manual del sistema

Perel

Perel ROLLER SHUTTER STORAGE CABINET Manual de usuario

BGS technic

BGS technic 4107 Manual de usuario

Clarke

Clarke CWB1250 Manual de usuario

Ryobi

Ryobi RWB02 Manual de usuario

Sealey

Sealey PTB66004 Manual de usuario

General International

General International Excalibur 40-100 Manual de lista de piezas

Newpo

Newpo Light Duty Workbench Manual de lista de piezas

Kobalt

Kobalt 0827415 Manual de usuario