Husky 45202 Manual de usuario

THANK YOU

We appreciate the trust and condence you have placed in Husky through the purchase of this Husky Track Wall. We strive to continually create

quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.

Thank you for choosing Husky!

USE AND CARE GUIDE

8 FT X 4 FT TRACK WALL

Questions, problems, missing parts?

Before returning to the store, call

Husky Customer Service

8 a.m. - 7 p.m., EST, Monday - Friday

9 a.m. - 6 p.m., EST, Saturday

Retain this manual for future use.

1-888-HD-HUSKY

HUSKYTOOLS.COM

Item #301110565

Model #45202

Table of Contents

Safety Information ..................................2

Warranty ..........................................2

What is covered ...................................2

What is not covered ................................2

Pre-Installation.....................................3

Planning installation ...............................3

Tools required ....................................3

Hardware included.................................3

Package Contents .................................4

Installation ........................................5

Care & Cleaning ....................................8

Service and parts ...................................8

Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Maintenance .......................................8

Troubleshooting ....................................9

Safety Information

HUSKY TRACK WALL MUST BE INSTALLED INTO WALL STUDS

It is the responsibility of the installer to ensure that wall mounting

surface and structure are sufcient in strength and capacity to

support Husky Track Wall weight and its contents. Failure to observe

these conditions may result in injury or death.

□For optimum performance, Track Wall must be mounted to

vertical wall studs spaced to 16 in. apart.

WARNING: Ensure that wall mounting surface and

structure are sufcient in strength and capacity to support

track wall weight and its contents.

CAUTION: For optimum performance, track wall must be

mounted to vertical wall studs spaced to 16 in.

Warranty

WHAT IS COVERED:

□Only panels in possession of the rst retail purchaser

□Defects in material or workmanship

WHAT IS NOT COVERED:

□Product failure that results from improper installation, misuse or abuse, alteration, or any other failure not related to defects in

materials or workmanship

□Damage due to acts of God, re, or accident

□Damage created by non-Manufacturer developed accessories such as, but not limited to, hooks or baskets

□Damage that results from loading the Track Wall beyond the stated maximum weight capacity

□The cost of return, labour, or accessory materials

3 HUSKYTOOLS.COM

Please contact 1-888-HD-HUSKY for further assistance.

Pre-Installation

PLANNING INSTALLATION

Decide where and how high you would like your track wall section installed.

You must start and nish on studs.

Studs should be centered 16 in. apart in order to support 75 lbs per square foot.

NOTE: In order to support 75lbs per square

foot, your studs must be a maximum of 16in.apart.

TOOLS REQUIRED

Stud nder Level Pencil

Drill

Mitre saw

If you plan on

cutting your panels

Snips

For cutting trims

to length.

HARDWARE INCLUDED

Part Description Quantity

AA Square-head bit # 2 1

BB 2 in screws

(Dual Robertson & Phillips Pan head #8)

NOTE: It is strongly recommended to use a drill

with the included square-head bit for all driving.

AA BB

Pre-Installation (continued)

PACKAGE CONTENTS

Part Description Quantity

A8ft track panels 10

B97

1∕2in. horizontal J-trim 2

C8 ft L-trim 1

2 x 97 1/2in. J-trim C

1 x 8 ft L-trim

10 x 8 ft track panels

5 HUSKYTOOLS.COM

Please contact 1-888-HD-HUSKY for further assistance.

Installation

1 Select the location for your Husky Track Wall Panels

□Both the left and right sides of Husky Track Wall Panels should fasten into studs.

□Husky Track Wall Panels are 48.5 in. height (when assembled). Select the desired elevation at which to begin assembly of your

Husky Track wall Panels and mark a horizontal level line at which to start from the bottom.

NOTE: In order to support 75lbs per square

foot, your studs must be a maximum of 16in.apart.

2 Locate and mark studs

□Once you have chosen your installation location,

verify that you are starting and nishing on a stud.

□Using a stud nder, locate all studs between start and

nish, and mark along their length with a level. You will

need to screw each panel into each stud.

3 Fasten horizontal J-trim to the wall

NOTE: For this step, it is best to have the help

of a second person.

□Use snips to cut one J-trim (B) to a lengh of 96 in.

□Install the bottom horizontal 96 in. J-trim where you

marked your level line, using screws (BB), fastening the

widest edge to the wall. Do not fasten into the rst or last

stud..

front side

wall side

96 in.

x 5

16in.

48.5 in.

96 in.

B J-trim

Installation (continued)

4 Install vertical J-trims

□Cut the remaining J-Trim (B) into two – 481∕2in. pieces.

□Overlap the vertical J-trim over the horizontal J-trim and secure at the bottom by fastening into the studs using screws (BB).

□The wide side should fasten to the wall as shown in inset A.

□Fasten into the stud using one screw (BB) at the top of the trim as indicated by arrows below.

□Measure the distance between left and right edges to conrm that the distance between them is 96 in.

5 Install rst panel

□Insert one side of the rst panel (A) into the vertical J-trim (B) at one side.

Curve the panel slightly to insert into the J-trim (B) at the other side.

□Ensure the panel (A) is seated into the horizontal J-trim (B) and is level. Using screws (BB),

fasten through the screw channel of the panel into each stud as marked, every 16 in.

□The rst and last screw in each panel should secure the panel and the trim to the stud.

Hook channel

DO NOT SCREW HERE

x 4x 2

x 7

x 1

NOTE: Do not drive screw through the hook channel.

Screw here

BB A

7 HUSKYTOOLS.COM

Please contact 1-888-HD-HUSKY for further assistance.

Installation (continued)

6 Continue Installation

□Insert the next panel (A) into the vertical J-trim (B) at one side.

□Curve the panel slightly to the vertical J-trim (B) at the other side. The second panel (A) should interlock over the rst panel’s

screw channel, but leaving the hook channel accessible. Properly interlocked panels will conceal all screws.

□Press down on the top of the second panel (A) to ensure that it is properly interlocked with the one below.

□Check to ensure the panel (A) is level along the entire width of the panel. Repeat this process after installing every third panel (A)

□Fasten the panel (A) to all wall studs using screws (BB).

□Repeat this process for panels 3-10.

NOTE: Screws installed at the top of the vertical J-trims may

have to be removed to complete clean installation of top panels.

x 63

x 9

Properly overlapped

8 Complete Installation

□Install your horizontal top L-trim (C) by simply clipping it into the lip above the screw cavity.

NOTE: Vertical J-Trims not included in image to show clear installation

of horizontal to L-trim.

x 1

A BB

Care and Cleaning

□Clean with soft cloth and mild detergents.

□Do not use sharp objects or abrasive cleaners.

□Dry using soft cloth.

Service Parts

Operation

Maintenance

□1-888-HD Husky to obtain missing or replacement parts.

□Statement of weight capacity: 75 lbs per square foot

□WARNING: Do not overload

□Warranty is null and void if not installed as per assembly instructions — mounted to studs.

□Husky Track Wall Panels are designed to provide multiple modular storage congurations.

□While Husky Track Wall panels are designed to provide years of maintenance-free use, annually check to ensure that all fasteners

are secure.

16 in.

Section 1

Section 2

Section 1 Section 2

No J-trim

Use two J-trims, back-to-

back between sections.

Troubleshooting

Concrete or block wall installation

□To install over concrete or cinder block, fasten 2 x 3 in.

studs or furring strips to your walls using tap cons or other

specialty fasteners rst, then proceed to install Husky

Track Wall Panels as per the Assembly Instructions.

24 in. stud centers

□Husky®Track Wall panels are designed to hold 75lbs per

square foot when installed as directed in studs spaced

16 in. apart. If your studs are wider apart, apply some

adhesive to the back of the panel if installing over drywall.

Vertical conguration installing

more than 4 ft. high

□If you are installing more than one section vertically, cut

vertical J-trims to desired height and continue panel

installation.

□Do not add additional trim between sections

for optimum results.

Horizontal Conguration

□Installing 2 sections – 16 ft. wide x 4 ft. high

Questions, problems, missing parts? Before returning to the store,

call Husky Customer Service

8 a.m.- 7 p.m., EST, Monday-Friday

9 a.m. - 6 p.m., EST, Saturday

1-888-HD-HUSKY

HUSKYTOOLS.COM

Retain this manual for future use.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Almacenamiento de herramientas de Husky

Husky

Husky H46MWC9GBXD-TL Manual de usuario

Husky

Husky UAT-H-60121 Manual de usuario

Husky

Husky H27TR7MS Manual de usuario

Husky

Husky HPRO72MWC20BLK Manual de usuario

Husky

Husky HOTC9624BB1M Manual de usuario

Husky

Husky H72MWC15R Manual de usuario

Husky

Husky H72CH9HD Manual de usuario

Husky

Husky HOTC6010BB2M Manual de usuario

Husky

Husky H42MWC10R-TL Manual de usuario

Husky

Husky H5CH2R Manual de usuario

Husky

Husky HOTC5213B1OS Manual de usuario

Husky

Husky 76812A24 Manual de usuario

Husky

Husky H61CH4P Manual de usuario

Husky

Husky 70220HWVR Manual de usuario

Husky

Husky H4TR1R Manual de usuario

Husky

Husky H60JSB Manual de usuario

Husky

Husky H63MWC11FT Manual de usuario

Husky

Husky HOWT72XDB12/22 Manual de usuario

Husky

Husky HOTC6214B11MYS Manual de usuario

Husky

Husky H46MWC9BOXD Manual de usuario

Husky

Husky HMT5212 Manual de usuario

Husky

Husky HOTC6212B11S Manual de usuario

Husky

Husky HOTC5209B21M Manual de usuario

Husky

Husky HOTC8010BB1S Manual de usuario

Manuales populares de Almacenamiento de herramientas de otras marcas

Ryobi

Ryobi RWB03 Manual de usuario

Scheppach

Scheppach ts 2100 Manual de usuario

Cornwell Tools

Cornwell Tools CTB360AKBK Manual de usuario

DIVERSIFIED WOODCRAFTS

DIVERSIFIED WOODCRAFTS SHAIN GSB-6024 Manual de usuario

Cassese

Cassese CS200 CART Manual de usuario

Kendall Howard

Kendall Howard ESDW-9630-1000 Manual de usuario

Lista

Lista Align Instrucciones de montaje

Workzone

Workzone 99609 Manual de usuario

Stanley

Stanley STST83800-1 Manual de usuario

Homak

Homak PROFESSIONAL Series Manual del sistema

Perel

Perel ROLLER SHUTTER STORAGE CABINET Manual de usuario

BGS technic

BGS technic 4107 Manual de usuario

Clarke

Clarke CWB1250 Manual de usuario

Ryobi

Ryobi RWB02 Manual de usuario

Sealey

Sealey PTB66004 Manual de usuario

General International

General International Excalibur 40-100 Manual de lista de piezas

Newpo

Newpo Light Duty Workbench Manual de lista de piezas

Kobalt

Kobalt 0827415 Manual de usuario