Huskie Tools Pro Line 7 Series Manual de usuario

OPERATOR MANUAL FOR MODEL: ECO-7336B

6 Ton Battery Operated Streamline Cutting Tool

WARNING To reduce the risk of injury, user must read and understand manual

completely before ﬁrst using this product and save this manual for future use.

THIS PAGE

INTENTIONALLY

LEFT BLANK

PD_3004 REV 0119 - subject to modiﬁcation. 3ECO-7336B - OPERATOR MANUAL

MODEL: ECO-7336B

TABLE OF CONTENTS

Description ....................................................................................................................................................... 4

Speciﬁcations................................................................................................................................................... 4

Components..................................................................................................................................................... 4

What’s Included............................................................................................................................................... 4

Safety Symbols............................................................................................................................................... 5

Safety Information.......................................................................................................................................... 6

Operating Instructions .................................................................................................................................. 8

Troubleshooting Guide ................................................................................................................................. 9

Maintenance Notes ...................................................................................................................................... 10

Warranty Information..................................................................................................................................... 11

THANK YOU for purchasing a Huskie Tools product. Our mission is to supply the

ﬁnest cable connecting and cutting tools and cable-related products to the transmission

and distribution markets. Huskie Tools products will represent state-of-the-art tools and be

dependable and safe.

MODEL: ECO-7336B

SPECIFICATIONS

Speciﬁcations

Length...................................................5” (127 mm)

Width...................................................... 3” (76 mm)

Height................................................ 17” (432 mm)

Weight ..........................................7.45 lb (3.38 kg)

Output/Force .................................6 tons (53 kN)

Cutting Capacities

ACSR........................................................336 MCM

Aluminum.................................................... up to 1”

Copper ................................................................ 4/0

Standard guy wire ...........................................3/8”

1. Fixed cutting blade

2. Integrated LED work light

3. Release trigger

4. Low battery indicator

5. 18V-5.0Ah Li-Ion Battery

6. Advance Trigger

7. Moveable Cutting Blade

COMPONENTS

WHAT’S INCLUDED

DESCRIPTION

The ECO-7336B Streamline Battery-Powered

Cutting tool with a 6-ton output.

The intended use of this tool is to cut steel core

conductor as well as copper and aluminum

conductor.

EACH TOOL KIT INCLUDES THE FOLLOWING:

ɨTool with jaw

ɨ18V-5.0Ah battery pack [BP-185] (x2)

ɨBattery charger

ɨHard storage case

PD_3004 REV 0119 - subject to modiﬁcation. 5ECO-7336B - OPERATOR MANUAL

MODEL: ECO-7336B

SAFETY SYMBOLS

You will see this symbol throughout this manual.

This purpose of this symbol is to call your attention

to hazards and/or unsafe practices that have the

potential to cause injury or property damage. The

severity of each hazard is further explained in

detail below. Failure to follow all instructions may

result in electric shock, ﬁre and/or serious injury.

The term “power tool” in all warnings refers to your

battery operated (cordless) power tool.



































































Read all instructions and

safety information detailed

in this operator manual prior

to operating or servicing

this tool. Failure to observe

this warning could result

in severe injury or death.





Do not discard this product or throw away!

For recycling information, contact 800-822-8837

MODEL: ECO-7336B



Work Area Safety

ɨKeep work area clean and well lit. Cluttered or dark areas invite accidents.

ɨDo not operate power tools in explosive atmospheres, such as in the presence of ﬂammable liquids,

gases or dust. Power tools create sparks which may ignite the dust or fumes.

ɨKeep bystanders away while operating a power tool. Distractions can cause you to lose control.



Personal Safety

ɨStay alert, watch what you are doing and use common sense when operating a power tool. Do

not use a power tool while you are tired or under the inﬂuence of drugs, alcohol or medication. A

moment of distraction while operating power tools may result in personal injury.

ɨUse personal protection equipment. Always wear eye protection. Safety equipment such as dust

mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will

reduce personal injuries.

ɨDo not overreach. Keep proper footing and balance at all times. This enables better control of the

power tool in unexpected situations.



Tool Use and Care

ɨTo prevent leakage, overheating, smoke generation, ﬁre, and rupturing from occurring, follow these

instructions when handling our rechargeable power tools (tool main body/battery pack/charger).

ɨDo not force the tool. Use the correct tool for your application. The correct tool will do the job better

and safer at the rate for which it was designed.

ɨDo not use the tool if the switch does not turn it on and o. Any tool that cannot be controlled with

the switch is dangerous and must be repaired.

ɨDisconnect the battery pack from the tool before making any adjustments, changing accessories, or

storing. Such preventive safety measures reduce the risk of starting the tool accidentally.

ɨStore idle tools out of the reach of children and do not allow persons unfamiliar with the tool or these

instructions to operate the tool. These tools can be dangerous in the hands of untrained users.

ɨMaintain tools. Check for misalignment or binding of moving parts, breakage of parts and any other

condition that may aect the tools operation. If damaged, have the tool repaired before use.

SAFETY INFORMATION

PD_3004 REV 0119 - subject to modiﬁcation. 7ECO-7336B - OPERATOR MANUAL

MODEL: ECO-7336B

ɨUse power tools only with speciﬁcally designated battery packs. Use of any other battery packs may

create a risk of injury and ﬁre.

ɨUnder abusive conditions, liquid may be ejected from battery; avoid contact. If contact accidentally

occurs, ﬂush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from

the battery may cause irritation or burns.

Battery and Charger Use and Care

ɨBefore using battery charger, read all instructions and cautionary markings on battery charger,

battery pack, and product using battery pack.

ɨTo reduce the risk of injury, charge only Huskie Tools Battery Pack model BP-185. Other types of

batteries may burst causing personal injury and damage.

ɨDo not leave charger and battery pack exposed to rain or snow, submerge in water, or stored in

damp or wet locations.

ɨTo reduce risk of damaging the electric plug and cord, pull by plug rather than cord when

disconnecting charger.

ɨMake sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to

damage or stress.

ɨDo not disassemble charger or battery pack, contact Huskie Tools service dept. at 800-860-6170

when service or repair is required. Incorrect reassembly may result in a risk of electric shock or ﬁre.

ɨDo not store the tool and battery pack in locations where the temperature may reach or exceed 50°C

(122°F) (such as a metal tool shed, or a car in the summer), which can lead to deterioration of the

storage battery.

ɨDo not charge battery pack when the temperature is BELOW 0°C (32°F) or ABOVE 40°C (104°F). This

is very important to maintain optimal condition of the battery pack.

ɨThe charger is designed to operate on standard 120V AC electrical power only. Do not attempt to use

it on any other voltage.

ɨCharge the battery pack in a well-ventilated place, do not cover the charger and battery pack with a

cloth, etc., while charging.

ɨUse of an attachment not recommended may result in a risk of ﬁre, electric shock, or personal injury.

ɨDo not short the battery pack or allow metal objects to touch the terminals. A battery short can cause

a large current ﬂow, overheating and create the risk of ﬁre or personal injury.

ɨHuskie Tools is not responsible for any damage or accident caused by the use of recycled or

counterfeit battery pack.

ɨDo not incinerate the battery pack or dispose of the battery pack in a ﬁre or expose it to excessive

heat.

ɨDo not charge the battery pack in a high-temperature location, such as next to a ﬁre or in direct

sunlight. Otherwise, the battery may overheat, catch ﬁre, or explode.

ɨAfter removing the battery pack from the tool or the charger, always re-attach the pack cover.

Otherwise, the battery contacts could be shorted, leading to a risk of ﬁre.

MODEL: ECO-7336B

OPERATING INSTRUCTIONS

CUTTING

1. Retract blades by pressing the release button.

2. Be sure that material being cut is within the speciﬁed cutting capacity of the tool.

3. Place the material to be cut between the blades and press the advance trigger until blades hold the

material in place.

4. Check material for proper alignment to the cutting blades. It should be at a 90° angle to the blades.

Any other angle will cause the blades to spread apart and possibly break. See Figures 8A and 8B.

5. Continue to advance the blades until the material is cut. If material is cut and tool has not yet by

passed, it may be dicult to retract blades. If this occurs, continue to advance tool and build pres-

sure. A series of clicks will be heard while the tool running in a “neutral” mode. This indicates that

the tool has built full pressure and bypassed and can now be released.





Figure 8A. Correct material placement. Figure 8B. Incorrect material placement.

ɨWhen the Battery Pack Has Deteriorated, Replace It with a New One. Continued use of a damaged

battery pack may result in heat generation, ignition or battery rupture.

ɨWhen storing, remove any material cuttings and dust from the battery pack, and place the battery

pack separately from metal objects (screws, nails, etc.) when storing in the tool case.

PD_3004 REV 0119 - subject to modiﬁcation. 9ECO-7336B - OPERATOR MANUAL

MODEL: ECO-7336B

TROUBLESHOOTING GUIDE

Before You Begin

1. Make sure that the battery is charged. Recheck the battery after several minutes to make sure the

battery is holding its charge.

2. Use a nonﬂammable contact cleaner or pencil eraser to clean the electrical contacts on the battery

and tool.

3. Reinstall the battery and check the tool again.

PROBLEM CAUSE SOLUTION

Motor runs but the tool

jaws will not advance

Insucient hydraulic oil Consult factory for repair service

Air block in hydraulic system Invert tool to allow air to rise to-

wards the top of the oil bladder

Defective hydraulic circuit Consult factory for repair service

Motor runs, tool jaws

advance, but will not build

pressure

Insucient hydraulic oil Consult factory for repair service

Defective suction valve or by-

pass cartridge

Consult factory for repair service

Motor will not run at all Defective battery Charge or replace battery

Bad contact or loose battery

connections

Check all connections and wires

Misaligned switch Check to make sure that switch is

properly aligned with trigger

Consult factory for repair service

Tool jaws will not release Tool did not complete a full

cycle and bypass

Press trigger and allow tool to by-

pass, then release tool jaws

Connector is jammed in tool

jaws

Press and hold release trigger

while prying tool jaws apart

Release trigger is bent or mis-

aligned

Consult factory for repair service

MODEL: ECO-7336B

MAINTENANCE NOTES

Otros manuales para Pro Line 7 Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cortador de Huskie Tools

Huskie Tools

Huskie Tools ECO-336B Manual de usuario

Huskie Tools

Huskie Tools PRO LINE REC-MK7105YC Manual de usuario

Huskie Tools

Huskie Tools REC Series Manual de usuario

Huskie Tools

Huskie Tools REC-S624CC Manual de usuario

Huskie Tools

Huskie Tools REC-660YC Manual de usuario

Huskie Tools

Huskie Tools REC-54ACM Manual de usuario

Huskie Tools

Huskie Tools S-32CC Manual de instrucciones

Huskie Tools

Huskie Tools SP-85 Manual de instrucciones

Huskie Tools

Huskie Tools ECO-MK7500 Manual de usuario

Huskie Tools

Huskie Tools ECO-336A Manual de usuario

Huskie Tools

Huskie Tools REC-B634YC Manual de usuario

Huskie Tools

Huskie Tools SP-20 Manual de instrucciones

Huskie Tools

Huskie Tools SL-S20 Manual de usuario

Huskie Tools

Huskie Tools 7M PRO LINE Series Manual de usuario

Huskie Tools

Huskie Tools REC-SB640 Manual de usuario

Huskie Tools

Huskie Tools REC-534YC Manual de instrucciones

Huskie Tools

Huskie Tools REC-S624H Manual de usuario

Huskie Tools

Huskie Tools REC-5OM Manual de instrucciones

Huskie Tools

Huskie Tools 7M PRO REC-MK754M Manual de usuario

Huskie Tools

Huskie Tools REC-54M Manual de instalación

Huskie Tools

Huskie Tools REC-5OU Manual de instrucciones

Huskie Tools

Huskie Tools REC-685YC Manual de usuario

Huskie Tools

Huskie Tools S-20 Manual de instrucciones

Huskie Tools

Huskie Tools REC-S640 Manual de usuario

Manuales populares de Cortador de otras marcas

Milwaukee

Milwaukee HEAVY DUTY M12 FCOT Manual de usuario

Makita

Makita DCS552 Manual de usuario

SignWarehouse.com

SignWarehouse.com Bobcat BA-60 Manual de usuario

Makita

Makita 4112HS Manual de usuario

GEISMAR STUMEC

GEISMAR STUMEC MTZ 350S Manual de usuario

Hitachi

Hitachi CM 4SB2 Guía de solución de problemas

Dexter Laundry

Dexter Laundry 800ETC1-20030.1 Manual de usuario

GCC Technologies

GCC Technologies AFJ-24S Manual de usuario

DeWalt

DeWalt XR LI-ION DCS350N Manual de usuario

Baudat

Baudat ES1 Manual de usuario

Mafell

Mafell ZAF 200 Guía

Makita

Makita 4100NH Manual de usuario

Formax

Formax FD 574 Manual de usuario

EINHELL

EINHELL TE-MA 1500 Manual de usuario

Husqvarna

Husqvarna Cut-n-Break K 760 Manual de usuario

CLEAN ROOM DEVICES

CLEAN ROOM DEVICES CRD130SS Manual de usuario

TRI tool

TRI tool 301A Manual de usuario

Roller

Roller King 1 1/4 Manual de usuario