SAFETY WARNINGS AND PRECAUTIONS
WARNING: When using the tool, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to the equipment. Read all
this instructions before using this tool!
WARNING –Keep children away. Children must never be allowed in the work
area Do not let them handle machines, tools, or extension cords.
WARNING –Store idle equipment. When not in use, tools must be stored in a
dry location to inhibit rust. Always lock up tools and keep out of reach of children.
WARNING –Dress properly. Do not wear loose clothing or jewelry as they can
be caught in moving parts. Protective, electrically non-conductive clothes and non-skid
footwear are recommended when working. Wear restrictive hair covering to contain
long hair.
WARNING –Use eye and ear protection. Always wear impact safety goggles.
Wear a full face shield if you are producing metal filings or wood chips. Wear a dust
mask or respirator when working around metal, wood, and chemical dusts and mists.
WARNING –Maintain tools with care. Keep tools sharp and clean for better and
safer performance. Follow instructions for lubricating and changing accessories.
Inspect tool cords periodically and, if damaged, have them repaired by an authorized
technician. The handles must be kept clean, dry, and free from oil and grease at all
times.
WARNING –Disconnect switch. Unplug switch when not in use.
WARNING –Stay alert. Watch what you are doing, use common sense. Do not
operate any tool when you are tired.
WARNING –Check for damaged parts. Before using any tool, any part that
appears damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Check for alignment and binding of moving
parts; any broken parts or mounting fixtures; and any other condition that may affect
proper operation. Any part that is damaged should be properly repaired or replaced by
