HuntersZone Wolf 30MP 4K 4G LTE Cloud Manual de usuario
WOLF 30MP 4G LTE
Cloud
Thank you for choosing HuntersZone Wolf 30MP 4G LTE Cloud wildlife camera. A cloud camera
developed together with one of the market's best manufacturese that we have worked closely
with for many years. The focus of the model is on fast trigger speed, efficient motion sensor, high
image and video quality combined with modern and easy-to-use cloud service via LinckEasi.
What you need to install the camera:
-Internet access and visiting this URL: https://www.linckeazi.com
-12*AA batteries. NOTE: For best function use rechargeable 12X AA Lithium batteries
3400mAh from Z-aim. These emit a steady amperage from start to finish, with these the
camera also works in -25C and in addition, the maximum strength of the IR flash is
maintained.
-SD card MAX 256GB: Minimum Class 10 and 80MB/S loading speed. If you use SD cards with
too low performance, the card will not have time to load the image/video information
correctly and problems arise!
How the camera works:
-The HuntersZone Wolf 30MP 4G LTE-S cloud camera makes use of high-speed 4G LTE
connectivity via LinckEazi's cloud platform.
-It shoots in a maximum of 30MP resolution and in a maximum of 4K video with audio.
-The camera needs a SIM card loaded with SURF mounted to be able to transmit images.
-The user can easily review their images and videos directly via the LinckEazi APP or web
portal via computer.
-The user can also easily remotely control their camera's settings via the LinckEazi APP or web
portal.
-WOLF 4G works throughout whole Europe and other areas, it connects quickly and easily to
the internet.
-Wolf 4G can be purchased in two designs:
As UNLOCKED version = can be used with SIM cards from any European operator.
-LOCKED with a SIM card installed that works no matter what EU country you are in and
always chooses the operator with the best coverage in the location. You choose your own
SIM card plan according to your need, from 100 pictures per month to the unlimited
Premium Plan. And the best part is: You don't have to make any complicated settings and
everything is done directly through LinckEasi.
1 Camera overview
1.1 Camera
1: Black Vision 940nm IR flash
2: Lens
3: Light Sensor
4: Start button
5: PIR sensor
6: Keyboard
7: HD TFT Screen
8: LTE Antenna
Fig1 Overview camera functions
1. 2 Start button and functions.
OFF: Off (Please remove the batteries when the camera is not in use);
SETUP: Setting mode of the camera via the Menu. (Keep in mind that all settings are then changed
according to what is selected in the APP)
ON: Active mode (The monitor shuts down, the camera switch to ACTIVE).
Buttons:
MENU: Enter the menu
▲▼◄ ►: Navigation buttons (Move Up/Down/Page in Menu)
OK: Confirm your selection in the menu / display pictures/movies in the camera screen.
►: Press to manually take a photo or movie. (Click again to stop video.).
2 Preparation
2.1 Installation of the batteries
This camera can be powered by 12AA batteries or 6V-12V external power. Pay attention to the (+) or
(-) molded into each sleeve to determine whether you insert the positive or negative end into the
sleeve first. Negative battery pole always comes in contact with the spring.
Note:
· Never mix different types of batteries
· Do not mix old and new batteries
· We recommend high-performance lithium batteries.
· Always remove the batteries when not in use to prevent leakage!
2.2 Install the SD card
To activate the camera, you need to install an SD card in the slot at the bottom right corner of the
camera.
SD card up to 256 GB can be used, minimum Class 10, loading speed 80MB/S.
Enter the MENU >SYS >Format SD and format the SD card before use.
Note: IF you have chosen a camera with a LinckEasi SIM card installed, this is sealed with a sticker.
Please note that ifa sticker is broken, the WARRANTY does not apply, please do not remove the
original SIM card from the camera!
2.3 Download mobile app
Seach "Linckeazi" in Google Play Store or Apple Store
Enter the web portal:
Open your browser to: https://www.linckeazi.com
You can also scan the QR code and install the APK file on your smartphone.
Android APP IOS-APP
3 Add the camera to the Linckeazi account
3.1 Login
To "send" images to your cloud account or mobile phone, you must first add the camera to your
Linckeazi account.
Open website: https://www.linckeazi.com or Linckeazi APP, log in to your account. If you have
registered on the cloud platform, enter your account and password to log in directly. If not, click
"Sign Up" on the page to open the registration page. NOTE: Save passcode/username
Fig 4 Inloggning via Linckeazi APP
3.2 Add camera
Please note: Your camera must be added to your account in the cloud service before use!
Name your camera; type in the SN and IMEI number from your camera. Add location description if
necessary. You can find SN and IMEI on a sticker inside your camera.
4.4 Change camera setting with web portal or APP
The CAM is easy to set through Web Portal or APP.
Fig 8 Device Settings via web portal
Fig 6 Add camera via APP
3.3 Select plan for your camera (SURF AMOUNT) (Applies if you purchased a Wolf 4G with a SIM card
installed)
Once you've installed your camera, choose a plan according to how much pictures/surf you think the
camera takes/consumes needs per month. If you have the camera in movie mode, you need
UNLIMITED.
3.4 Check your order information
You can check your order information on the Account >Order Info
Attention to the camera's data plan: (Applies only to camera purchased with for installed region-
free SIM card)
1. Without replenishment within 7 days of the data plan expiring, the camera will be turned off
until a new activation and data replenishment occurs (the cloud notifies you as a user to
replenish on time), but you will have to pay extra activation fee if it goes longer than 7 days
before replenishing the data plan.
1. If the camera remains completely without any data plan for a year, the SIM card tied to your
camera will be completely deregistered. In order to use the camera again, you will then need
a new SIM card from the distributor, and you will have to pay an additional activation fee.
The same principle as with ordinary Swedish SIM cards.
2. 3. It is applicable to apply a refund only to the data plan that is still in force after one month.
It is users' choice to transfer the data plan to another camera with the same model under the
same user account if they encounter camera returns.
3. Attention to the HQ Option Package Plan:
4. 1. The HQ option is tied to the camera without output but is suspended from being used
unless there is a basic data plan, while it can be reactivated after the refill.
5. 2. The HQ data package is non-refundable but can be transferred to another camera with the
same model under the same user account.
4Setting camera
4.1 Information In display
You can see a wealth of information directly in the camera's display.
Fig7 Monitor
4.2 Settings
The camera can be easily set up either via website or APP.
Click "Apply to Device" when you are done with settingsa.
Send mode off: Disable the transfer function = the camera does not transmit images but shoots as
usual!
Maximum number: Maximum number of images that the camera is allowed to transmit each day (24
hours). To control/limit the camera's data consumption, specify the maximum number of shots you
want to receive in a day. The number 00 means UNLIMITED.
Remote control: You can remotely control your camera via the APP in your mobile phone or web
portal. If you select the real-time mode, the camera is active (connected) 24H/Day to receive
commands directly, for example if you want to use the take picture command. You should use this
function very sparingly or with rechargeable Lithium batteries as the power consumption increases
dramatically.
Delay 24H means that the wireless module wakes up the device after 24 hours and then downloads
any new settings you sent via the APP, even if there is no trigger. The Delay setting is for saving
power. If the camera is triggered by any animal before 24 hours have passed, new settings are
downloaded.
Download Settings: This means that your selected settings are broadcast to your camera and synced
against the camera settings in the cloud for your camera.
Upload settings: That means syncing the settings from your camera to the cloud.
FW update: NEVER unplug the batteries or external power when updating the camera. Make sure
the batteries have more than 80% energy left before updating. Update only the camera on site with
fast and stable internet connection. If the update is interrupted before it is complete, the camera
software may be severely damaged to render it unusable.
Camera Setting
Camera mode
Photo / Video / Photo & Video;
Photo size
30MP/24MP/20MP/16MP/8MP/5M
P
IR flash
Low/Medium/High
Photo Burst
1Photo ~10Foton (Default: 1 photo)
Video size
4K@10fps/2.7K@20fps/1080p@30f
ps/720p@30fps/WVGA@30fps
Length of video
5s-1min (Standard:10s)
Video strength IR
flash
High/Low
Tabla de contenidos
