Hunter Omega TE20180 Manual de usuario
1
Instruction manual for scouting trail camera
Gebrauchsanleitung Scouting Trail Camera
Riistakameran Käyttöohje
Hunter Omega
4G Trail Cloud Camera
Article no: TE20180
2
3
Thank you for choosing one of our highly qualified products. This trail
cloud camera was produced thanks to feedback and requests from our
customers. We hope you will enjoy the camera as much as we do. And
never forget that our company is always willing to embrace creative
ideas from you.
Hunter Omega 4G Trail Cloud Camera is aimed to offer you a durable
quality product with many extraordinary features, like:
– Pre-installed SIM card.
– Free remote-control APP (IOS & Android).
– Viewing image and videoclip in the APP.
– 20 meters invisible real night vision ability.
– 0.4 seconds trigger time.
– 1 photo/sec multi-shot to capture the whole track of object
(up to 5 photos per trigger).
– User-friendly operational menu and setup.
– GPS Alert.
What is in the Box?
– Hunter Omega, 4G Trail Cloud Camera
– Hunter SIM card (pre-installed)
– 4G Antenna, 2pcs
– Mounting strap
– USB cable
– Instruction manual (different languages)
If any item is missing, contact your local dealer for assistance.
Please note that Batteries and SD-card are sold separately!
Introduction
English
2
3
Quick Guide
Hunter Omega 4G Trail Cloud Camera can be used with two different
options:
1. Use the Hunter SIM (included in the box) and setup an account
and payment plan for storing photos and videoclips in the cloud
(recommended).
2. Use other brand SIM card and setup an account for storing photos
and videoclips in the cloud.
Step 1 – Get the APP and camera ready
1. Download and install the free “HunterCam” APP on your phone by
scanning below QR code or searching in APP Store/ Google Play.
IOS app Android app
HunterCam
Hunter Sales i Stockholm AB
4
5
2. Use a valid email to register, then activate the account through the
email you received and log in.
Note! The activation mail might be in your spam mail.
3. Install the antennas, SD card (up to 32GB) and 12pcs AA batteries.
Hunter SIM card is already installed. If another brand SIM card is
preferred, install it now.
Step 2 – Add camera to APP account
1. Slide the Power Switch to “SETUP” position, wait 60 seconds. Then
enter “MENU→Other→QR Code” to get camera unique QR code.
2. Click “Add Camera→Next” in the APP, scan the camera QR code to
add camera to your APP account.
Step 3 – Choose data plan
Every new camera comes with 1000 free credits which you can find in
“APP→Account”.
Hunter SIM card:
1. Exit to APP home screen ( Cameras), then tap on icon
to enter camera setting list page.
2. Choose “Refill” to top up your account with more Credits, then exit
to camera setting list page. You will receive a top-up notification by
email.
Note! 1000 free credits are included in your APP account.
3. Click “Activate SIM Card” to choose preferred data plan.
4
5
Other brand SIM card:
1. Camera will connect to 4G network automatically after SIM card
is inserted. If “SIM Automatch failed, pls enter setups manually”
pops up on screen, go to “SETUP→MENU→Cam→4G Setup→
Manual” and fill in your SIM card operators 4G APN, Username and
Password.
Note! It is not a must to enter Username and Password of APN, but
some operators require this password access to get connection on their
4G network. Check with your SIM card operator to get this confirmed.
2. Activate and top-up your SIM card with data.
3. In the “APP→Account”, tap “Add Credits”, “OK”, “Add HunterCam
Credits”. 1000 free credits are included.
Step 4 – Test & Start Using
1. Turn OFF the camera, then slide the Power Switch to “SETUP”
position again, wait until screen shows 4G signal bar(s).
2. Press “OK” button to take a photo, wait about 35 – 45 seconds, the
photo will be transmitted to your APP directly.
3. Slide the Power Switch to “ON” position, camera indicator light will
flash 5 times before it enters auto working mode.
Note! Two bars of signal strength are required for the camera to
operate well.
6
7
Whole View and Details of Camera
Front View of Camera
Antennas
Indicator Light and
Day/Night-sensor
PIR-sensor
27 IR LEDs
Lens
30 IR LEDs
57 IR LEDs
in Total
6
7
Bottom View of Camera
Indicator Light and
Day/Night-sensor
SD Card Slot
DC in
USB Port
Battery Compartment
SIM Card Slot
Battery Compartment
Power Switch
(ON/OFF/SETUP)
Color Screen
MENU Button
Navigation Buttons/ OK Button
Internal, Side and Back View of Camera
8
9
How to Get the Camera Ready
1. Insert the Batteries
Open the camera and insert the batteries as polarity marked in battery
compartment.
Note! 12pcs AA Alkaline or Ni-MH are recommended. For better
performance, choose the “Battery Type” of the batteries used.
SETUP→MENU→Other→Battery Type
2. Insert the SD card & SIM card
Insert the SD and SIM card in correct direction according to the mark
on the camera.
Note! Minimum 4 GB and maximum 32GB SD card is required
3. Mount the Antennas
Screw the antennas into the connectors on the top of the camera by
turning clockwise until properly fastened.
4. Configure Camera Settings
Slide the Power Switch to SETUP, the screen will light up. Press MENU
button, you will enter the menu to view & change settings. Press arrow
buttons for navigation, OK button to confirm settings and MENU to
return to previous position in the menu.
5. How to Connect the Camera to Network
The camera has a signal “Searching” process when you slide the
Power Switch to SETUP. It may take a minute or two to connect on a
cellular network.
Hunter SIM:
When connected the signal strength indicator will be shown on the
screen.
8
9
Other brand SIM:
If “SIM Auto Match failed…” pop-up on the screen. Go to the Menu,
“Cam”, “4G Setup”, select “Manual” and fill in your SIM operator
APN details. The camera will connect to the network for transmitting
photos.
SETUP→MENU→Cam→4G Setup→Manual→APN, Username,
Password
Note! It is not a must to enter Username and Password of APN, but
some operators require this password access to get connection on their
4G network. Check with your SIM card operator to get this confirmed.
6. Function Test
Follow the steps in the quick guide to setup an account and top-up your
SIM card, otherwise the photos will only be stored on the SD card.
To test the camera operation:
1. Slide the Power Switch to SETUP and wait for the camera to con-
nect to the operator (4G signal strength indicator is shown on the
screen).
2. Press the OK button once. The camera will take a photo, save on the
SD card, and transmit the photo to your APP.
3. Follow the sequence of events on the screen. Transmitting the photo
may take 35 to 45 second based on the operator’s network and
signal strength.
Note!
– If camera configuration is correct the screen will show message “send
successful”.
– If failed to transmit follow the steps in quick guide.
– Two bars of signal strength are required for the camera to operate well.
– Do not forget to top-up your SIM card with data.
10
11
7. Start Using
Slide the Power Switch to ON; camera is ready to work upon motion
triggers (the screen will not light up upon “ON”). You can mount it out
to work directly after this if default settings are preferred.
GPS Alert
GPS Alert is a function that notifies the owner of changes in camera’s
geographical location.
Within 1km of the camera’s geographical location on the map is a safe
zone. Beyond this zone, GPS Alert automatically sends an alert to the
APP informing the owner “Alert! Your camera is out of safe zone”.
Important!
Do not activate the GPS Alert function until the camera is in correct
location. Once the camera’s geographical location is updated on the
cloud server it will be stored as reference location.
To activate the GPS Alert function:
1. In the camera menu, set the “GPS” to “ON”.
SETUP→MENU→Cam→GPS→ON
2. In the camera APP settings, set the “GPS Alert” to “ON”.
APP→Setting →General Settings→GPS Alert→ON
To stop receiving GPS Alert, switch the function OFF in the APP.
APP→Setting →General Settings→GPS Alert→OFF
Note!
• If Remote Control is in ON-Instant mode: commands from the APP
will take effect immediately, the camera will search for GPS every
two hours.
• If Remote Control is in ON-0.5H – ON-24H mode: commands from the
APP will be executed based on the time interval setting, the camera
will search for GPS according to the time interval setting.
Tabla de contenidos
Idiomas:
Otros manuales de Cámara digital de Hunter
