Hunter SRC Plus Manual de usuario

Published on Hunter Industries (http://www.hunterindustries.com)

Home > How do I reset my Hunter controller?

Product Lines:

Controllers [1],

Discontinued Models [2]

Products:

X-Core, [3]

XC, [4]

Pro-C, [5]

PCC, [6]

SVC, [7]

ACC, [8]

EC, [9]

Node, [10]

SRC / SRC Plus, [11]

ACC-99D Decoder [12]

Topics:

FAQs, Video

Note: All Hunter controller's must be in the Run position to reset.

SRC

1. Unplug the controller's transformer.

2. Press and hold down the , and buttons.

3. Plug the controller's transformer back in.

4. Release the , and buttons. The display should now show

12:00am. All the memory has been cleared and the controller may now be

reprogrammed.

SRC Plus

1. Press and hold down the , and buttons.

2. Press and release the RESET button in the lower wiring compartment.

3. Release the , and buttons. The display should now show

12:00am. All the memory has been cleared and the controller may now be

reprogrammed.

1. Press and hold down the , and buttons.

2. Press and release the RESET button in the lower wiring compartment.

3. Release the , and buttons. The display should now show

12:00am. All the memory has been cleared and the controller may now be

reprogrammed.

X-Core

1. Press and hold down the , and buttons.

2. Press and release the RESET button on the right side of the controller.

3. Wait 2 seconds and release the , and buttons. The display

should now show 12:00am. All the memory has been cleared and the

controller may now be reprogrammed.

Pro-C (newer models)(with Seasonal Adjust Dial Position)

1. Press and hold the button.

2. Press and release the RESET button on the back of the front panel.

3. Wait until the display shows 12:00am.

4. Release the .

Pro-C (older models)(with Manual All Station dial position)

1. Turn the dial to the RUN position.

2. Remove the 9V battery.

3. Hold down the , and program buttons simultaneously.

4. While holding down the three buttons, press and release the Reset button

on the back of the front panel.

5. Release all three buttons.

ICC

1. Turn the dial to the RUN position.

2. Remove the 9V battery.

3. Hold down the , and program buttons simultaneously.

4. While holding down the three buttons, press and release the Reset button

on the back of the front panel.

5. Release all three buttons.

SVC

1. Remove the 9V battery from the controller and wait 1 minute.

2. Press and hold the , and buttons.

3. Replace the 9V battery.

4. Release the , and buttons.

NODE

1. From the Time and Day display, press and hold the , and keys.

2. After two seconds the screen will go blank and 4 segments will appear.

Release the keys.

3. 12:00 will flash on the display, now the controller can be reprogrammed.

ACC

1. Press and hold the Programs button, and at the same time press in the

recessed Reset button with the tip of a ball point pen.

2. Release the Reset button and continue holding the Programs button until

the Reset Memory screen appears (then release the Programs button).

The display will show the following Reset options:

Programs: Erases Day schedules, start times, and run times.

Flow Totals: Clears the running flow total histories (they will restart with 0.0

for all entries), only.

Logs: Clears all Station alarm logs and Controller alarm logs.

Names: Clears all user programmed names, including Programs, Stations

and SSG's.

All Data: Clears all of the above items, and controller returns to original out-

of-the-box programming state.

Use the up and down arrows to highlight the desired type of Reset. Press the +

button to select it.

A confirmation message will appear. If + is pressed again, the selection will be reset.

Note: None of the reset functions will erase the Easy Retrieve "backup", if one

has been made.

Otros manuales para SRC Plus

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Controladores de Hunter

Hunter

Hunter Hydrawise Pro-HC Manual de usuario

Hunter

Hunter 27178 Manual de usuario

Hunter

Hunter Pro-HC601-A Manual de usuario

Hunter

Hunter ICC2 Manual de usuario

Hunter

Hunter Hydrawise HC-1200M Manual de usuario

Hunter

Hunter HCC Manual de instalación

Hunter

Hunter Hydrawise HCC-FPUP Manual de usuario

Hunter

Hunter ICC Series Manual de usuario

Hunter

Hunter 99373 Manual de usuario

Hunter

Hunter 600-Z Manual de usuario

Hunter

Hunter PRO-C Hydrawise Manual de lista de piezas

Hunter

Hunter 99111 Manual de usuario

Hunter

Hunter X-CORE XC-2 Manual de lista de piezas

Hunter

Hunter Hydrawise Pro-HC Manual de usuario

Hunter

Hunter VSX Manual de usuario

Hunter

Hunter XC HYBRID Series Guía

Hunter

Hunter SVC Manual de usuario

Hunter

Hunter PSC-Z Series Instrucciones de funcionamiento

Hunter

Hunter ACC-1200 Manual de usuario

Hunter

Hunter Pro-C Instrucciones de funcionamiento

Hunter

Hunter SpectraProbe XE Instrucciones de uso

Hunter

Hunter NODE-BT Manual de usuario

Hunter

Hunter X-CORE Instrucciones de funcionamiento

Hunter

Hunter SRC Plus Manual de usuario

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario