Huawei WA8011V Manual de usuario
WA8011V Quick Start
Extend your home network in several steps!
31500AUR_01
01 02 03 04
05 06 07 08 09
10 11 12 13 14
15 16
Safety Information
To use the device properly and safely, read the safety precautions carefully before using the device and
strictly observe these precautions when using the device.
Safety precautions:
Store devices and accessories in temperature –10°C to +35°C and relative humidity 30%–85% RH for at
most 9 months. If the ambient temperature or relative humidity is overhigh or overlow, the device may be
faulty.
Used only indoors. Do not lead metallic cables, such as network cables and telephone lines outdoors.
Do not look directly into the optical port without eye protection.
Keep the device out of the reach of children as the components or accessories may be swallowed.
Install the device in strict compliance with the requirements of the supplier. Reserve a space of at least 10
cm above and around the device for heat dissipation. During the installation, keep the device away from
electric appliances that generate strong magnetic or electric fields, such as microwave ovens, refrigerators,
and mobile phones.
The described input voltage range should comply with the local power grid. For example, the input voltage
of the adapter is 200–240 V AC for European Union; the input voltage of the adapter is 100–140 V AC for
America.
If the power adapter is damaged and its internal circuit is exposed due to manmade factors, do not touch
the exposed circuit, which may bring safety risks.
Only power adapters delivered with the device can be used. Otherwise, the device may be abnormal or
unsecure.
Dry your hands before connecting or disconnecting cables. Stop the device and switch off the power before
connecting or disconnecting cables.
Do not place any object on the device, so that the device will not be damaged due to overheating or
deformation. 01 02 03 04
05 06 07 08 09
10 11 12 13 14
15 16
Prevent objects, such as metal, from entering the device through the heat dissipation hole.
Switch off the power and disconnect all cables, including the power cable, optical fiber, and network cable,
during periods of lightning activities. The socket-outlet shall be installed near the power adapter and shall
be easily accessible. Before use the power adapter, please check no damage on the adapter.
Do not lead the strength member of the optical fiber or other metal parts indoors. Do not install telephone
lines, network cables, power adapters or power adapter cables outdoors. Adopting these measures will
help prevent device damage and bodily injuries which are especially prone during thunderstorms.
If an abnormality occurs, for example, liquid entering the device, smoke, unusual sound, and smell, stop
the device immediately, switch off the power, disconnect all cables (such as the power cable, optical cable,
and network cable) to the device, and contact the authorized service center.
Do not disassemble the device without permission. In the case of a device fault, contact the authorized
service center.
Dispose of the packing materials, expired batteries, and old or abandoned devices in accordance to local
laws and regulations (recycling them is strongly recommended).
Do not change the structure, safety design, or performance design of the device without prior authorization.
The device should be installed and operated with a minimum distance of 20 cm between the radiator and
your body.
Fireproof precautions:
Keep the device away from large heat source equipment, bare flames, and high-power devices, such as
electric heaters, candles, and blow drier, to eliminate safety risks.
If there are aged cables or power socket facilities on the power supply line to or near the device, replace
them in time to eliminate safety risks. The power supply voltage of the device must meet the input voltage
requirement.
01 02 03 04
05 06 07 08 09
10 11 12 13 14
15 16
Appearance
* This product is used indoors only.
* The product appearance shown in this document is for your reference only. The actual product appearance prevails
.
Power plug
Reset button
WPS button WAN port LAN port
2.4G/5G antenna
3-segment indicators
01 02 03 04
05 06 07 08 09
10 11 12 13 14
15 16
WA8011V Description
Power plug
Reset button
WPS button
WAN port
LAN port
Description of Ports and Buttons
Antenna
Connected to a router.
Connected to a terminal.
When you press this button for over 10s, the device is restored to
factory defaults.
Used for Wi-Fi pairing. When you respectively press the WPS button
in the WA8011V and router within 2 minutes, network connection is
established between the 2 devices.
When pairing succeeds, the WA8011V can be freely removed and
reinstalled and no more pairing is required.
Used to generate Wi-Fi signals.
Inserted in a power plug.
01 02 03 04
05 06 07 08 09
10 11 12 13 14
15 16
Item Specification
100–240 V AC, 50/60 Hz
0°C to 40°C (32°F to 104°F)
5%–95% (non-condensing)
≤ 6.5 W
130 mm x 65 mm x 45 mm
(without external antennas)
< 400 g
Parameter
Typical power consumption
System power supply
Weight
Ambient temperature
Ambient humidity
Dimensions (H x W x D)
01 02 03 04
05 06 07 08 09
10 11 12 13 14
15 16
A. Insert the WA8011V into a power socket near the router, and then press its WPS
button and hold for 3s to 10s.
B. Within 2 minutes, press the WPS button on the router.
Wireless Network Extension
2
1
Note:
When the segment-1 indicator turns from red (blinks quickly) to steady green, the WA8011V has
been connected to the wireless network.
WPS
Internet
Upstream
Press the WPS button for connection (this mode is recommended if your
router supports WPS).
1.Connect the WA8011V to an existing wireless network
Gateway/router
WPS
Reset
WPS
01 02 03 04
05 06 07 08 09
10 11 12 13 14
15 16
A. Check the Wi-Fi name and password on the nameplate. Insert the WA8011V into
a power socket near the router, and connect a smartphone to the WA8011V
through Wi-Fi.
Use a smartphone to connect the WA8011V to a wireless network
(this mode is recommended if your router does not support WPS).
IP:xx.xx.xx.xx
username:xxxx
password:xxxxxxxx
SSID:HUAWEI-XXXX
WLAN Key:XXXXXXX
WPS
Reset
11:474G
<
Choose a network
WLAN
WLAN
HUAWEI-xxxx
01 02 03 04
05 06 07 08 09
10 11 12 13 14
15 16
Note: When the segment-1 indicator turns green on, the WA8011V has been connected to the
wireless network.
B. Check the IP address, user name and password on the nameplate, and log in to
the web page. On the Fast Setting page, Bridge is automatically selected. Click Skip.
11:47
192.168.101.1
User Name:
Password:
Log In
11:47
192.168.101.1
Fast Setting
Home
Page
11:47
192.168.101.1
Bridge
Transforms your existing wired
network to a wireless network.
Upstream Configuration
SkipExit Save
01 02 03 04
05 06 07 08 09
10 11 12 13 14
15 16
C. On the Wi-Fi network scanning page, select the name of the Wi-Fi network to be
expanded, enter the Wi-Fi password, and click Next.
On the account management page, enter old and new web page login passwords,
and click Next. The web page login password is changed. If you do not want to
change the password, click Skip. The configuration is complete.
11:47
192.168.101.1
11:47
192.168.101.1
Select a wireless network.
1
2
xxxxxxxx 5G
5G
SSID:
XXXXXXX
XXXXXXX
Next SkipQuit
Scan Network
NO. SSID Signal
Frequency Band
MAC
Encrypt
Settings
Password:
Encrypt:
Re-scanning
Please change your login password
Old Password:
New Password:
Confirm Password:
User Name: root
Next
Previous Skip
Account Management
11:47
192.168.101.1
Current network connection mode:
Wi-Fi
You can navigate to the home page
and start using the Huawei terminal.
Return to Home Page
Previous
Configuration Completion
01 02 03 04
05 06 07 08 09
10 11 12 13 14
15 16
Tabla de contenidos
Otros manuales de Enrutador inalámbrico de Huawei
Huawei
Huawei WS5200 Manual de usuario
Huawei
Huawei Vodafone Pocket WiFi R207 Manual de usuario
Huawei
Huawei LTE CPE E5172 Manual de usuario
Huawei
Huawei Quidway NE40E Manual de instrucciones
Huawei
Huawei E5377Ts-32 Especificaciones técnicas
Huawei
Huawei E5151 Manual de usuario
Huawei
Huawei Mobile WiFi Pro2 Manual de usuario
Huawei
Huawei E5573Cs Manual de usuario
Huawei
Huawei EM770 Manual del propietario
Huawei
Huawei WS331B Manual de usuario
Huawei
Huawei B315 LTE CPE Manual del operador
Huawei
Huawei Pocket WiFi Pro Instrucciones de montaje
Huawei
Huawei B311-521 Manual de usuario
Huawei
Huawei CarFi 4G Manual de usuario
Huawei
Huawei Mobius E5330Bs-6 Guía de instalación
Huawei
Huawei Vodafone R207 Especificaciones técnicas
Huawei
Huawei E5577 Manual de usuario
Huawei
Huawei K562 Manual de usuario
Huawei
Huawei Aolynk DR814Q ADSL2+ Manual de usuario
Huawei
Huawei E5573s-320 Especificaciones técnicas
