Huawei Band 4e Manual de usuario
Contents
Getting started
Charging your band 1
Wearing your band 2
Pairing the band with your phone 2
Icons 3
Powering on/o and restarting the band 6
Gestures 7
Wearing mode 7
Restoring factory settings 8
Workout monitoring
Running form monitoring 9
Basketball performance tracking 10
Daily activity tracking 12
Dual device connection 13
Convenient life
Incoming calls 14
Rejecting incoming calls 14
Notications 14
Finding your phone using the band 14
Setting an Event alarm 15
Setting a Smart alarm 16
Health management
Activity reminders 18
Sleep tracking 18
More guidance
Viewing the Bluetooth name and MAC address 20
Updating your device 21
Viewing version information 21
Cleaning and maintenance 21
Water resistance 21
i
Getting started
Charging your band
Charging
1Push the band body through the strap to remove it.
2Align the main body's metal charging contacts with the charging cradle and insert them
into the charging cradle.
3During charging, the charging icon and battery level will be displayed on the screen, and
the phone will automatically power on. Otherwise, change the charger direction and try
again.
Charge your band in a dry and well-ventilated environment.
Before charging, make sure the charging port is dry. Wipe o any water or sweat stains
to prevent any short-circuiting.
Your band does not come with a charger. Use a Huawei charger with a rated output
voltage of 5 V and a rated output current of 0.5 A or higher, a USB port on your
computer, or a charger that complies with applicable national and regional laws and
regulations as well as international and regional security standards to charge your band.
Other chargers and power banks that do not meet corresponding safety standards may
cause issues such as slow charging and overheating. Exercise caution when using them. It
is recommended that you purchase a Huawei charger from an ocial Huawei retail
channel.
Charging time
It takes about 2 hours to fully charge the band. After the band is fully charged, it will display
a full charge icon.
Viewing the battery level
•View the battery level on the band's watch face when the band screen is on.
•Alternatively, open the Huawei Health app on the connected phone and touch Devices
then your device name to check the battery level of your band.
Low battery alert
When the battery level is lower than 10%, your band will vibrate to notify you of the low
battery level and prompt you to charge your band as soon as possible.
1
Wearing your band
1Attach and x the body into the strap as shown in the following gure.
2The strap is made of exible materials. Adjust it before putting it on. If you need to adjust
the strap again after putting it on, put your middle nger between the layers of the strap,
then use your thumb and index nger to slide the buckle.
•Your band is made of materials that are safe to use. If you experience skin discomfort
when wearing the band, stop using it and consult a doctor.
•Be sure to wear your band properly to maximise comfort.
•Keep the band and your skin dry and clean to prevent any damages caused by
moisture.
Pairing the band with your phone
Connect your band to the charging cradle to activate your band when using it for the rst
time. The band is ready to be paired via Bluetooth by default.
Instead of pairing your band with the phone via Bluetooth directly, pair your band with the
phone using the Huawei Health app. Otherwise, your phone will not display the correct time
and step count.
•For Android users:
1Download the latest version of the Huawei Health app.
2Open the Huawei Health app, go to Devices > > ADD > Smart bands, and select
your band's name.
3Touch PAIR and the app will automatically search for available devices. Once your band
is found, touch its name to start pairing.
4Your band will vibrate when it receives a pairing request. Tap the touch key on your
band to start pairing.
•For iOS users:
1Download the latest version of the Huawei Health app.
2Open the Huawei Health app, go to Devices > > ADD > Smart bands, and select
your band's name.
3Touch PAIR and the app will automatically search for available devices. Once your band
is found, touch its name to start pairing.
4Your band will vibrate when it receives a pairing request. Tap the touch key on your
band to start pairing.
Getting started
2
•Your band will display an icon on the screen to inform you that the pairing is
successful. It will then receive information (such as the date and time) from your
phone.
•Otherwise, your band screen will display an icon to inform you that pairing was
unsuccessful. It will then return to the startup screen.
Icons
The icons may vary depending on the band version. The following information is for
reference only.
Wrist mode:
Time Steps Distance
Calories Sleep time Find phone
Getting started
3
Switch to Foot mode Incoming calls Mute incoming calls
Alarm Dismiss the alarm Hours active
moderate to high intensity Goal reached Message reminders
More Restart Power o
Device name - -
The "Find phone" icon will not be displayed when your band is not connected to your
phone.
Foot mode:
Getting started
4
Running Switch to Wrist mode Individual workout distance
Individual workout time App connected running Basketball
Cycling monitoring (only
supported with the HUAWEI
Band 4e Active)
- -
Connection and pairing:
Bluetooth to be connected Bluetooth connection failure Bluetooth connected
Connect to Bluetooth - -
Battery:
Getting started
5
Charging Low battery -
Others:
System update - -
Powering on/o and restarting the band
Powering on the band
Your band will automatically power on if you charge it.
Powering o the band
•Your band will automatically power o if the battery is empty.
•In Wrist mode, tap the touch key below the screen until the screen is displayed, then
tap and hold the touch key to enter it. Tap the touch key to switch to the screen, then
tap and hold the touch key to power o the band.
Restarting the band
In Wrist mode, tap the touch key below the screen until the screen is displayed, then tap
and hold the touch key to enter it. Tap the touch key to switch to the screen, then tap
and hold the touch key to restart the band.
Getting started
6
Gestures
Action Function
Touch the touch key Switch between screens
Touch and hold the
touch key
Enable the corresponding feature
Waking the screen
To wake the screen, raise your wrist or rotate it in an inward direction, and the screen will
stay on for 5 seconds.
•Open the Huawei Health app, then enable the Raise wrist to wake screen feature on
the device details screen.
•The screen brightness cannot be adjusted manually.
Switching between screens
To switch between screens, rotate your wrist when the screen is on.
•Open the Huawei Health app, then enable the Rotate to switch screen feature on the
device details screen.
•The Rotate to switch screen feature is not supported in Foot mode.
Turning o the screen
•To turn o the screen, lower your wrist.
•The screen automatically turns o when the band is idle for 5 seconds.
When the screen wakes up within 5 seconds after turning o, it returns to the previous
screen. When the screen wakes up more than 5 seconds after turning o, it switches to
the home screen.
Wearing mode
The band comes with Wrist mode and Foot mode.
•The following features are supported in Wrist mode: daily activity tracking, sleep tracking,
message reminders, incoming call notications, alarm reminders, and nding your phone
using your band.
•The following features are supported in Foot mode: professional running data monitoring
(cadence, stride, ground contact time, foot strike pattern, landing impact, eversion
excursion, and swing angle.), basketball performance tracking (average vertical jump
height, maximum vertical jump height, number of jumps, average hang time, average
moving speed, and maximum moving speed), and cycling monitoring (cadence).
Getting started
7
Restoring factory settings
Method 1: Restore your band to its factory settings: Knock the time screen two times with
one knuckle and tap the touch key until you nd the Restore screen, then tap and hold the
touch key to restore the band to its factory settings. Once you have restored your band to its
factory settings, all its data will be cleared, so please exercise with caution.
Method 2: Open the Huawei Health app, touch Devices and then touch your device name.
On the device settings screen, touch Restore factory settings.
Getting started
8
Workout monitoring
Running form monitoring
1Switching to Foot mode
aDownload the Huawei Health app and pair your band with your phone when using the
band for the rst time.
bPinch the buttons on either side of the shoe attachment to open it. Insert the body in
the top of the case, align the metal contacts of the band body with those on the shoe
attachment. Buckle the attachment, then loop your laces through the space behind the
band body and tie it to your shoe.
cThen band will automatically switch to Foot mode and a running startup screen
will be displayed.
1For more accurate results, make sure the device is resting on the top and near the
middle of your laces.
2Please tighten the shoe buckle and note that fastening the shoe buckle around too
many or few laces may cause the shoe buckle to become too loose.
3You can also open the Huawei Health app, touch Devices, touch Wearing mode, and
set Wearing mode to Manual. In Wrist mode, tap the touch key on the band screen
to enter the screen, then tap and hold the touch key to switch to Foot mode.
4The running form monitoring is a feature powered by algorithm that is specially
designed for running in Foot mode and oers seven types of professional running
form data. Wear the device on your shoe when running to get the most ecient and
accurate data.
2Monitoring running form
Method 1: Starting a running session using your band.
The band can record your running data during the workout even when it is not connected
to your phone. You can simply connect your band to the phone using the Huawei Health
app after the running session to sync data between both devices.
aStart running: Tap and hold the touch key on the running startup screen on the
band.
bStop running: Tap and hold the touch key on the band to stop running.
cSync data: Ensure that the band is connected to the phone using the Huawei Health
app for the data to be synced automatically. You can also swipe down on the home
9
Otros manuales para Band 4e
2
Tabla de contenidos
Otros manuales de Mirar de Huawei
Huawei
Huawei Band Manual de usuario
Huawei
Huawei Watch GT Manual de usuario
Huawei
Huawei Watch Fit Manual de usuario
Huawei
Huawei WATCH 4 Series Manual de usuario
Huawei
Huawei Watch 2 Manual de usuario
Huawei
Huawei Watch GT3 46mm Manual de usuario
Huawei
Huawei AND-B19 Manual de usuario
Huawei
Huawei Watch 2 Manual de usuario
Huawei
Huawei Watch 2 Instrucciones originales
Huawei
Huawei WATCH Manual de usuario
Huawei
Huawei TalkBand B1 Manual de usuario
Huawei
Huawei Band 2 Pro Eris-B29 Manual de usuario
Huawei
Huawei TalkBand B6 Manual de usuario
Huawei
Huawei MIL-B19 Manual de usuario
Huawei
Huawei HONOR Watch GS Pro Guía de referencia
Huawei
Huawei WATCH 3 Series Manual de usuario
Huawei
Huawei Watch Buds Manual de usuario
Huawei
Huawei Metis B19 Manual de usuario
Huawei
Huawei ASN-AL10 Manual de usuario
Huawei
Huawei Band 6 Manual de usuario
