Huawei WS7001 Manual de usuario

Quick Start Guide

Model: WS7001

Contents

Quick Start Guide....................................................1

................................................15

快速入門...................................................................28

クイックスタートガイド..........................................40

Panduan Memulai Cepat................................56

Getting Started

Quick Start Guide

WPS/RESET button: Provides the functions of both the WPS button and the RESET

button.

WAN/LAN c port: Connects to the Internet (such as optical modem, broadband

modems, etc.) and wired network device such as a computer.

Power port

Indicator 2

WPS/RESET

POWER

2 43

1000M WAN/LAN

1 2 3

POWER

LAN

PON

RESET

WPS/RESET

POWER

1000M WAN/LAN

1 2 3

Step 1: Connecting the cables

Internet

Optical/Broadband/cable modem

(from your broadband provider)

•Erect the all antennas upright to ensure optimized Wi-Fi®signal.

•If the indicator stays red, this indicates that the router is not connected to the Internet.

Please refer to "Step 2: Conguring the network settings".

• For routers that support WAN/LAN auto-adaptation, the network ports are WAN/LAN

combo ports. You can also specify a xed WAN port on the router's web-based management

page.

WAN

LAN

1Connect your mobile phone or computer

to the router's Wi-Fi network (no

password required).

Check for the Wi-Fi name on the bottom of

the new router.

2Open the browser, you will be

automatically redirected.

(If the page is not displayed

automatically, enter 192.168.3.1).

Let's get started

Step 2: Conguring the network settings

Wi-Fi

Connected

XXXXXX Wi-Fi Name: XXXXXX

3Enter your broadband account and password.

If your Internet connection does not require an account and password, please skip to

the next step.

Internet access wizard

Broadband account

Broadband password

VLAN

•If you have forgotten your broadband

account and password, contact your

broadband carrier to obtain a broadband

account and password.

• If you need to congure VLAN on your

network, contact your broadband carrier to

conrm the VLAN parameters, and enable

the VLAN switch on the screen.

4Set a new Wi-Fi name, Wi-Fi password, and admin password for the new router.

Internet access wizard

Prioritize 5 GHz

Wi-Fi network name

Wi-Fi network password

Internet access wizard

Conguration complete.

Enable Prioritize 5 GHz: Priority usage of 5 GHz Wi-Fi band over 2.4 GHz band when signal

strength is equal to increase connection speeds.

Conrm password

Indicator

Steady green

Steady red

Flashing

Connected to the network

Not connected to the network

•Loose cable or connect error. Check the cable.

•Broadband network error. Contact your broadband carrier.

The router has detected a pairable device.

When other HUAWEI devices (support HarmonyOS Connect) are detected, the

indicator on the HUAWEI WiFi AX2 will ash. When this happens, press the

HUAWEI WiFi AX2's WPS/RESET button. The indicator should ash quickly,

indicating that the pairable device is connecting to the HUAWEI WiFi AX2.

The connection process is complete when the indicator stops ashing.

If you touched the WPS/RESET button by accident, wait for 2 minutes till the

indicator returns to normal.

Manage the router with our mobile app

Scan the QR code to download and install the HUAWEI AI Life

App on your mobile phone or tablet. You can use the app to

manage your router.

Frequently Asked Questions (FAQ)

Q1: What can I do if I encounter any of the following issues when conguring the router?

• If your device did not detect the router's Wi-Fi: Ensure that the router is powered on. Wait for a

moment (till the router is started) and try to search again on your device.

•If you cannot visit the router's conguration page on your device: Ensure that your device is

connected to the router's Wi-Fi network, and then enter 192.168.3.1 in the browser to visit this

page on your device.

•If the page displays "Cable disconnected": Ensure that the router's WAN port is connected to

the modem's LAN port, and the modem has Internet access. Check that all joints are securely

connected and in good contact, and the network cables are in good condition.

If the issue persists, restore the router to the factory settings, and follow the guide to reconnect the

cables and congure the router.

Q2: How do I restore the router to its factory settings?

Connect the router to the power supply and wait until the router completes the startup process.

Use a needle or pin to press the WPS/RESET button on the router for more than 8 seconds

until the indicator light goes out. Wait for the router to complete the restart process. When the

indicator turns red, this indicates that the router has been restored to its factory settings.

If the router has been factory reset, you need to congure it again.

Q5: What should I do if I forget my login password for the app or the router's web-

based management page?

Try using the router's Wi-Fi password to login. If the issue persists, restore the router to the

factory settings.

Q3: How do I connect an add-on HUAWEI router to my HUAWEI WiFi AX2's network?

You can connect the router in either of the following ways:

•Wired connection. Connect the WAN port of the add-on router (new or restored to factory

settings) to the LAN port of the congured HUAWEI WiFi AX2 using an Ethernet cable.

•Wireless connection. Step 1: Place the add-on router (new or restored to factory settings) within

one meter of the congured HUAWEI WiFi AX2 and connect it to the power supply. Step 2:

When the indicator on the HUAWEI WiFi AX2 starts to ash, press the WPS/RESET button on it.

Wait until the indicator on the add-on router shows it is connected to the network.

"HUAWEI router" refers to routers that support HarmonyOS Mesh+. Please check if your

device supports such feature.

Q4: How do I connect a Wi-Fi device to my router using WPS?

When your router is powered on, press its WPS/RESET button, and then press the WPS button on

the Wi-Fi device (such as a phone) within two minutes, to initiate standard WPS negotiation and

connect the Wi-Fi device to the router's Wi-Fi network.

Otros manuales para WS7001

Tabla de contenidos

Idiomas:

Otros manuales de Enrutador de red de Huawei

Huawei

Huawei Quidway NetEngine80E Manual de usuario

Huawei

Huawei OptiXstar HG8145X6-10 Manual de usuario

Huawei

Huawei S3700 Series Manual de usuario

Huawei

Huawei AR1200 Series Manual de usuario

Huawei

Huawei WS5200 Manual de usuario

Huawei

Huawei B315 Series Manual de usuario

Huawei

Huawei AR1200 Series Manual de usuario

Huawei

Huawei Quidway S9300 Manual de usuario

Huawei

Huawei AR530 Series Manual de usuario

Huawei

Huawei H122-372 Manual de usuario

Huawei

Huawei WS5200 Manual de usuario

Huawei

Huawei EchoLife HG8240 Manual de usuario

Huawei

Huawei Baudcom EG8145V5 Manual de usuario

Huawei

Huawei EG8147X6 Manual de programación

Huawei

Huawei EchoLife BM625 WiMAX CPE Manual de usuario

Huawei

Huawei B628-265 Manual de usuario

Huawei

Huawei B535-333 Manual de usuario

Huawei

Huawei E5373s-155 Manual de usuario

Huawei

Huawei InZone E960 Manual de usuario

Huawei

Huawei Mobile wifi e5330 Manual de usuario

Huawei

Huawei SmartAX MT800 Manual de usuario

Huawei

Huawei B593 Hoja de especificaciones

Huawei

Huawei EchoLife EG8245H5 Manual de usuario

Huawei

Huawei HG532D Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad