Huawei SUN600-5KTL-L0 Manual de usuario

SUN600-(5KTL, 6KTL)-L0

User Manual

Issue 04

Date 2023-02-17

HUAWEI TECHNOLOGIES CO., LTD.

No part of this document may be reproduced or transmitted in any form or by any means without prior

written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective

holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and

the customer. All or part of the products, services and features described in this document may not be

within the purchase scope or the usage scope. Unless otherwise specied in the contract, all statements,

information, and recommendations in this document are provided "AS IS" without warranties, guarantees

or representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every eort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website: https://e.huawei.com

About This Document

Purpose

This document describes the Smart Solar Inverter-(5KTL, 6KTL)-L0 (inverter for

short) in terms of its installation, electrical connection, commissioning,

maintenance, and troubleshooting. Before installing and operating the inverter,

ensure that you are familiar with the features, functions, and safety precautions

provided in this document.

Intended Audience

This document is applicable to:

● Installers

● Users

Symbol Conventions

The symbols that may be found in this document are dened as follows.

Symbol Description

Indicates a hazard with a high level of risk which, if not

avoided, will result in death or serious injury.

Indicates a hazard with a medium level of risk which, if

not avoided, could result in death or serious injury.

Indicates a hazard with a low level of risk which, if not

avoided, could result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not

avoided, could result in equipment damage, data loss,

performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to

personal injury.

SUN600-(5KTL, 6KTL)-L0

User Manual About This Document

Symbol Description

Supplements the important information in the main text.

NOTE is used to address information not related to

personal injury, equipment damage, and environment

deterioration.

Change History

Changes between document issues are cumulative. The latest document issue

contains all the changes made in earlier issues.

Issue 04 (2023-02-17)

● Updated 1 Safety Information.

● Updated 4.1 Checking Before Installation.

● Updated 5.1 Precautions.

● Updated 6 System Commissioning.

● Updated 8 System Maintenance.

Issue 03 (2022-02-25)

● Updated 2.1 Overview.

● Updated 10 Technical Parameters.

Issue 02 (2021-12-20)

● Updated 7.1.3 Creating a PV Plant and a User.

● Updated 7.2.1 Energy Control.

● Updated 10 Technical Parameters.

Issue 01 (2021-11-01)

This issue is the rst ocial release.

SUN600-(5KTL, 6KTL)-L0

User Manual About This Document

Contents

About This Document................................................................................................................ ii

1 Safety Information.................................................................................................................. 1

1.1 Personal Safety.........................................................................................................................................................................2

1.2 Electrical Safety........................................................................................................................................................................4

1.3 Environment Requirements................................................................................................................................................. 6

1.4 Mechanical Safety................................................................................................................................................................... 8

2 Product Introduction............................................................................................................ 13

2.1 Overview.................................................................................................................................................................................. 13

2.2 Component Description...................................................................................................................................................... 16

2.3 Label Description.................................................................................................................................................................. 17

2.3.1 Enclosure Labels.................................................................................................................................................................17

2.3.2 Product Nameplate...........................................................................................................................................................19

2.4 Working Principles................................................................................................................................................................ 19

3 Inverter Storage..................................................................................................................... 22

4 System Installation............................................................................................................... 23

4.1 Checking Before Installation............................................................................................................................................. 23

4.2 Preparing Tools and Instruments.................................................................................................................................... 24

4.3 Determining the Installation Position............................................................................................................................25

4.4 Moving an Inverter............................................................................................................................................................... 29

4.5 Installing an Inverter............................................................................................................................................................29

4.5.1 Wall-Mounted Installation............................................................................................................................................. 30

4.5.2 Support-Mounted Installation.......................................................................................................................................32

5 Electrical Connection............................................................................................................36

5.1 Precautions.............................................................................................................................................................................. 36

5.2 Preparing Cables................................................................................................................................................................... 37

5.3 Connecting PE Cables.......................................................................................................................................................... 40

5.4 (Optional) Installing a Smart Dongle............................................................................................................................ 42

5.5 Installing a WLAN Antenna...............................................................................................................................................43

5.6 Connecting an AC Output Power Cable........................................................................................................................44

5.7 Connecting DC Input Power Cables................................................................................................................................47

5.8 (Optional) Connecting Signal Cables.............................................................................................................................51

SUN600-(5KTL, 6KTL)-L0

User Manual Contents

6 System Commissioning........................................................................................................ 58

6.1 Verication Before Power-On........................................................................................................................................... 58

6.2 System Power-On................................................................................................................................................................. 59

7 Man-Machine Interaction....................................................................................................62

7.1 App Commissioning............................................................................................................................................................. 62

7.1.1 Downloading the FusionSolar App..............................................................................................................................62

7.1.2 (Optional) Registering an Installer Account............................................................................................................ 63

7.1.3 Creating a PV Plant and a User.................................................................................................................................... 64

7.2 Parameters Settings............................................................................................................................................................. 64

7.2.1 Energy Control.................................................................................................................................................................... 64

7.2.1.1 Grid-tied Point Control................................................................................................................................................. 64

7.2.1.2 Apparent Power Control on the Inverter Output Side...................................................................................... 69

7.2.2 AFCI........................................................................................................................................................................................ 70

7.2.3 IPS Check (for Italy CEI0-21 Grid Code Only)......................................................................................................... 72

7.2.4 DRM (Australia AS4777)................................................................................................................................................. 73

8 System Maintenance............................................................................................................ 76

8.1 System Power-O.................................................................................................................................................................76

8.2 Routine Maintenance.......................................................................................................................................................... 77

8.3 Troubleshooting..................................................................................................................................................................... 78

9 Inverter Disposal....................................................................................................................89

9.1 Removing an Inverter.......................................................................................................................................................... 89

9.2 Packing an Inverter.............................................................................................................................................................. 89

9.3 Disposing an Inverter.......................................................................................................................................................... 89

10 Technical Parameters......................................................................................................... 90

10.1 Inverter Technical Specications................................................................................................................................... 90

A Grid Code................................................................................................................................ 94

B Device Commissioning......................................................................................................... 96

C Resetting Password...............................................................................................................99

D Rapid Shutdown................................................................................................................. 102

E Locating Insulation Resistance Faults............................................................................103

F Acronyms and Abbreviations............................................................................................106

SUN600-(5KTL, 6KTL)-L0

User Manual Contents

1 Safety Information

Statement

Before transporting, storing, installing, operating, using, and/or maintaining the

equipment, read this document, strictly follow the instructions provided herein,

and follow all the safety instructions on the equipment and in this document. In

this document, "equipment" refers to the products, software, components, spare

parts, and/or services related to this document; "the Company" refers to the

manufacturer (producer), seller, and/or service provider of the equipment; "you"

refers to the entity that transports, stores, installs, operates, uses, and/or

maintains the equipment.

The Danger, Warning, Caution, and Notice statements described in this

document do not cover all the safety precautions. You also need to comply with

relevant international, national, or regional standards and industry practices. The

Company shall not be liable for any consequences that may arise due to

violations of safety requirements or safety standards concerning the design,

production, and usage of the equipment.

The equipment should be used in an environment that meets the design

specications. Otherwise, the equipment may be faulty, malfunctioning, or

damaged, which is not covered under the warranty. The Company shall not be

liable for any property loss, personal injury, or even death caused thereby.

Comply with applicable laws, regulations, standards, and specications during

transportation, storage, installation, operation, use, and maintenance.

Do not perform reverse engineering, decompilation, disassembly, adaptation,

implantation, or other derivative operations on the equipment software. Do not

study the internal implementation logic of the equipment, obtain the source code

of the equipment software, violate intellectual property rights, or disclose any of

the performance test results of the equipment software.

The Company shall not be liable for any of the following circumstances or

their consequences:

● The equipment is damaged due to force majeure such as earthquakes, oods,

volcanic eruptions, debris ows, lightning strikes, res, wars, armed conicts,

typhoons, hurricanes, tornadoes, and other extreme weather conditions.

● The equipment is operated beyond the conditions specied in this document.

SUN600-(5KTL, 6KTL)-L0

User Manual 1 Safety Information

● The equipment is installed or used in environments that do not comply with

international, national, or regional standards.

● You fail to follow the operation instructions and safety precautions on the

product and in the document.

● You remove or modify the product or modify the software code without

authorization.

● You or a third party authorized by you cause the equipment damage during

transportation.

● The equipment is damaged due to storage conditions that do not meet the

requirements specied in the product document.

● You fail to prepare materials and tools that comply with local laws,

regulations, and related standards.

● The equipment is damaged due to your or a third party's negligence,

intentional breach, gross negligence, or improper operations, or other reasons

not related to the Company.

1.1 Personal Safety

D ANGER

Ensure that power is o during installation. Do not install or remove a cable with

power on. Transient contact between the core of the cable and the conductor will

generate electric arcs or sparks, which may cause a re or personal injury.

D ANGER

Non-standard and improper operations on the energized equipment may cause

re, electric shocks, or explosion, resulting in property damage, personal injury, or

even death.

D ANGER

Before operations, remove conductive objects such as watches, bracelets, bangles,

rings, and necklaces to prevent electric shocks.

D ANGER

During operations, use dedicated insulated tools to prevent electric shocks or short

circuits. The dielectric withstanding voltage level must comply with local laws,

regulations, standards, and specications.

SUN600-(5KTL, 6KTL)-L0

User Manual 1 Safety Information

WARNING

During operations, wear personal protective equipment such as protective

clothing, insulated shoes, goggles, safety helmets, and insulated gloves.

Figure 1-1 Personal protective equipment

General Requirements

● Do not stop protective devices. Pay attention to the warnings, cautions, and

related precautionary measures in this document and on the equipment.

● If there is a likelihood of personal injury or equipment damage during

operations, immediately stop, report the case to the supervisor, and take

feasible protective measures.

● Do not power on the equipment before it is installed or conrmed by

professionals.

● Do not touch the power supply equipment directly or with conductors such as

damp objects. Before touching any conductor surface or terminal, measure

the voltage at the contact point to ensure that there is no risk of electric

shock.

● Do not touch operating equipment because the enclosure is hot.

● Do not touch a running fan with your hands, components, screws, tools, or

boards. Otherwise, personal injury or equipment damage may occur.

● In the case of a re, immediately leave the building or the equipment area

and activate the re alarm or call emergency services. Do not enter the

aected building or equipment area under any circumstances.

Personnel Requirements

● Only professionals and trained personnel are allowed to operate the

equipment.

– Professionals: personnel who are familiar with the working principles and

structure of the equipment, trained or experienced in equipment

operations and are clear of the sources and degree of various potential

hazards in equipment installation, operation, maintenance

SUN600-(5KTL, 6KTL)-L0

User Manual 1 Safety Information

– Trained personnel: personnel who are trained in technology and safety,

have required experience, are aware of possible hazards on themselves in

certain operations, and are able to take protective measures to minimize

the hazards on themselves and other people

● Personnel who plan to install or maintain the equipment must receive

adequate training, be able to correctly perform all operations, and understand

all necessary safety precautions and local relevant standards.

● Only qualied professionals or trained personnel are allowed to install,

operate, and maintain the equipment.

● Only qualied professionals are allowed to remove safety facilities and inspect

the equipment.

● Personnel who will perform special tasks such as electrical operations,

working at heights, and operations of special equipment should possess the

required local qualications.

● Only authorized professionals are allowed to replace the equipment or

components (including software).

● Only personnel who need to work on the equipment are allowed to access

the equipment.

1.2 Electrical Safety

D ANGER

Before connecting cables, ensure that the equipment is intact. Otherwise, electric

shocks or re may occur.

D ANGER

Non-standard and improper operations may result in re or electric shocks.

D ANGER

Prevent foreign matter from entering the equipment during operations. Otherwise,

equipment damage, load power derating, power failure, or personal injury may

occur.

WARNING

For the equipment that needs to be grounded, install the ground cable rst when

installing the equipment and remove the ground cable last when removing the

equipment.

SUN600-(5KTL, 6KTL)-L0

User Manual 1 Safety Information

Otros manuales para SUN600-5KTL-L0

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Hardware de red de Huawei

Huawei

Huawei CR-R1UL Manual de usuario

Huawei

Huawei ST5110 Manual de usuario

Huawei

Huawei PDU8000 Series Manual de usuario

Huawei

Huawei PowerCube 500 V200R001C10 Manual de usuario

Huawei

Huawei MatePad Paper Manual de usuario

Huawei

Huawei RU3832 Manual de usuario

Huawei

Huawei RT-1E1 Manual de usuario

Huawei

Huawei HG8145V5 Manual de usuario

Huawei

Huawei RRU3908 V1 Manual de usuario

Huawei

Huawei RT-FIC-1GBE Manual de usuario

Huawei

Huawei IDS2000 Dual-Row Aisle Containment Manual de usuario

Huawei

Huawei CR52-LPUF-20 Manual de usuario

Huawei

Huawei TP48200A-HX09A1 Manual de usuario

Huawei

Huawei HG8245W5 Manual de usuario

Huawei

Huawei RRU Manual de usuario

Huawei

Huawei EG8040F5 Manual de usuario

Huawei

Huawei SmartLi 1.0 Manual de usuario

Huawei

Huawei NetEngine-8000-M8 Manual de usuario

Huawei

Huawei EchoLife HG8245 Manual de usuario

Huawei

Huawei CR52-SFUD Manual de usuario

Huawei

Huawei SmartLi Manual de usuario

Huawei

Huawei MAP05A1 Manual de usuario

Huawei

Huawei V600R019C00 Especificaciones técnicas

Huawei

Huawei RTN510 Manual de usuario

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario