Huawei EC1260 Manual de usuario
Copyright © 2009 Huawei Technologies Co., Ltd.
All Rights Reserved.
No part of this document may be reproduced or transmitted in any form or by any
means without prior written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co.,
Ltd.
All other trademarks and trade names mentioned in this document are the
property of their respective holders.
Notice
The information in this document is subject to change without notice. Every effort
has been made in the preparation of this document to ensure accuracy of the
contents, but all statements, information, and recommendations in this document
do not constitute the warranty of any kind, express or implied.
i
Table of Contents
Getting to Know the HUAWEI EC1260 ...................................................... 1
Requirements for the PC ......................................................................... 4
Preparing the HUAWEI EC1260 ............................................................... 4
Installation Guide .................................................................................. 6
Safety Information................................................................................10
1
Thank you for purchasing HUAWEI EC1260
CDMA1X EVDO Rev.A USB Stick.
Note:
This manual briefly describes the preparation, the process for
installing/uninstalling, and safety precautions for using Huawei HUAWEI
EC1260 CDMA1X EVDO Rev.A USB Stick (here in after referred to as the
HUAWEI EC1260 ).
You are recommended to read the manual before using the HUAWEI EC1260 .
Getting to Know the HUAWEI EC1260
The following figures show the appearance of the HUAWEI EC1260 . The actual
product may differ.
1
2
3
6
5
4
nUSB Interface
It connects the HUAWEI EC1260 to a computer.
oIndicator
Indicates the status of the HUAWEI EC1260 .
On: The HUAWEI EC1260 is powered on.
Blinking once every 2s: The HUAWEI EC1260 is searching the network or the
network is not found.
Blinking twice every 2s: The network is found.
Blinking once every 0.2s: The HUAWEI EC1260 is engaged in a call or data
service.
2
pEarphone Interface
Connect the earphone.
qUSIM/SIM card slot
Holds the USIM/SIM card.
rMicro SD card slot
Holds the Micro SD card.
sStrap Hole
3
Requirements for the PC
To use the HUAWEI EC1260 , the PC must meet the following requirements:
Standard USB interface.
Windows 2000 SP4, Windows XP SP2, Windows Vista.
Mac OS X 10.4 and 10.5 with latest upgrades
The hardware of your PC must meet or exceed the recommended system
requirements for the installed version of OS.
Display resolution: 800 × 600 or above.
Preparing the HUAWEI EC1260
1. Take out of the back cover of the HUAWEI EC1260 .
2. Insert the USIM/SIM card and the micro SD card into the card slots. Make sure
that the cards are properly inserted.
4
5
Note:
Micro SD card is an optional accessary. If the micro SD card is not provided in
the package, you can buy one yourself.
Do not remove the USIM/SIM card and the micro SD card when they are being
used. Removing the cards during an operation may damage the cards as well
as the device, and data stored on the cards may be corrupted.
Installation Guide
The procedure for installing the management program depends on the operating
system installed on your PC. The following section takes Windows XP as an
example.
Connecting the HUAWEI EC1260 with a PC
Note:
Power on your PC before connecting the HUAWEI EC1260 with the PC. Otherwise,
the normal installation of the HUAWEI EC1260 may be affected.
One way: Plug the HUAWEI EC1260 into the USB interface of the PC.
6
The other way: connect the HUAWEI EC1260 to a PC using the USB
extension cable.
Installing the HUAWEI EC1260 Management Program
1. Connect the HUAWEI EC1260 with the PC.
2. The OS automatically detects and recognizes new hardware and starts the
7
installation wizard.
Note:
If the auto-run program does not respond, find the AutoRun.exe file in the driver
path. Then double-click AutoRun.exe to run the program.
3. Follow the prompts of the installation wizard.
4. After the program is installed, the shortcut icon of the management program
is displayed on the desktop.
Starting the Management Program
After the HUAWEI EC1260 is installed, the management program is launched
automatically. Then every time the HUAWEI EC1260 is connected to the PC, the
management program is launched automatically.
You can also double-click the shortcut icon on the desktop to launch the
management program.
Uninstalling the Management Program
1. Choose Start > Control Panel.
2. Find the management program, and click Add/Remove program to uninstall
the management program.
Note:
It is recommended to restart the PC after the uninstallation to ensure that the
management program is completely uninstalled.
Removing the HUAWEI EC1260
1. Double-click in the system tray. The Unplug or Eject Hardware
interface is displayed.
8
Otros manuales para EC1260
1
Tabla de contenidos
Otros manuales de Módem de Huawei
Huawei
Huawei MS2131I-8 Manual de usuario
Huawei
Huawei WiMAX USB Stick Manual de usuario
Huawei
Huawei EC325 Manual de usuario
Huawei
Huawei E1762 Guía de instalación
Huawei
Huawei Turbo Stick E182 Manual de usuario
Huawei
Huawei E220 Manual de usuario
Huawei
Huawei EC167 Manual de usuario
Huawei
Huawei Globe BROADBAND Manual de usuario
Huawei
Huawei E3276 4G LTE Manual de usuario
Huawei
Huawei E3531 Manual de usuario
Huawei
Huawei E220 Manual de usuario
Huawei
Huawei EC150 Manual de usuario
Huawei
Huawei EC189 Manual de usuario
Huawei
Huawei EC306 Manual de usuario
Huawei
Huawei E220 Manual de usuario
Huawei
Huawei E5830 Manual de usuario
Huawei
Huawei E169 Manual de usuario
Huawei
Huawei MT992 Manual de usuario
Huawei
Huawei E160 Manual de usuario
Huawei
Huawei E160E Manual de usuario
Manuales populares de Módem de otras marcas
US Robotics
US Robotics 3453C Manual de usuario
MaxTech
MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manual de usuario
Zte
Zte MF823 Manual de usuario
Four-Faith
Four-Faith F1403 Manual de usuario
Sierra Wireless
Sierra Wireless AIRLINK MP595W Manual de usuario
Gemtek
Gemtek WiMAX WIXFBR-103 Manual de usuario