Huawei SUN2000-196KTL-H0 Manual de usuario

HUAWEI TECHNOLOGIES CO., LTD.

SUN2000-196KTL-H0

Quick Guide

Issue: 02

Part Number: 31500DDB

Date: 2020-05-15

Port Description

•The information in this document is subject to change without notice. Every effort has been

made in the preparation of this document to ensure accuracy of the contents, but all statements,

information, and recommendations in this document do not constitute a warranty of any kind,

express or implied.

•Only qualified and trained electrical technicians are allowed to operate the device. Operators

should understand the composition and working principles of the grid-tied PV power system and

local standards.

•Before installing the device, read the user manual carefully to get familiar with product

information and safety precautions. Huawei shall not be liable for any consequences caused by

the violation of the storage, transportation, installation, and operation regulations specified in this

document and the user manual.

•Use insulated tools when installing the device. For personal safety, wear proper personal

protective equipment (PPE).

1Product Overview

Front View

(1) PV connection indicator

(2) Grid-tied indicator

(3) Communication indicator

(4) Alarm/Maintenance

indicator

(5) Host panel cover

(6) Maintenance

compartment

(1)

DC input terminals (controlled by DC SWITCH 1)

(2)

DC switch 1 (DC SWITCH 1)

(3)

DC input terminals (controlled by DC SWITCH 2)

(4)

DC switch 2 (DC SWITCH 2)

(5)

DC input terminals (controlled by DC SWITCH 3)

(6)

DC switch 3 (DC SWITCH 3)

(7) Ventilation valve

(8)

USB port (USB)

(9) Communications port (COM)

(10) Hole for the AC output power cable

(11) Hole for the tracking system power cable

Installation Angle

2.1

2Installation Requirements

SUN2000 Dimensions

Mounting Bracket Dimensions

3Installing the SUN2000

Installation Space

2.2

For ease of installing the SUN2000

on the mounting bracket, connecting

cables to the bottom of the

SUN2000, and maintaining the

SUN2000 in future, it is

recommended that the bottom

clearance be between 600 mm and

730 mm.

Position for saving a

security torx

wrench

•The M12x40 bolt assemblies are delivered with

the SUN2000. If the bolt assembly length does

not meet the installation requirements, prepare

M12 bolt assemblies by yourself and use them

together with the delivered M12 nuts.

•Before installing the mounting bracket, remove

the security Torx wrench from the mounting

bracket and save it for later use.

•This document introduces how to install the

SUN2000 on a support as an example. For

details about wall-mounted installation, see the

user manual.

1. Install the mounting bracket.

3. Adjust the installation positions of the handles, and install the SUN2000 on the mounting

bracket.

2. Unpack the inverter and move it to the specified position.

Handles are packed in a fitting bag and are not delivered with the SUN2000.

If outdoor copper-core cables are used, select copper wiring terminals. For details about the

requirements for cables and terminals of other materials, see the user manual.

4Installing Cables

Installation Preparations

4.1

No.

Item

Type

Specifications

Description

PE cable

Single

core outdoor

copper cable

Conductor cross

sectional area ≥ S/2

a(S

is the conductor cross

sectional area of the AC

output power cable.)

•

If you choose the

ground point on the

chassis shell for

connecting a PE

cable, prepare the PE

cable.

•

If you choose the

ground point in the

maintenance

compartment for

connecting a PE

cable, use a four-

core

AC output power

cable and do not have

to prepare a PE cable.

AC output

power cable

Outdoor copper

cable

•

Conductor cross-

sectional area: 50–

240 mm2

•Cable outer diameter:

24–66 mm (multi-

core); 14–35 mm

(single-core)

If you choose the ground

point in the maintenance

compartment for

connecting a PE cable,

use a four

-core cable.

Otherwise, use a three

core cable or three

single

-core cables.

Outdoor aluminum

core cable

•

Conductor cross-

sectional area: 70–

240 mm2(multi-core);

70–240 mm2(single-

core)

•Cable outer diameter:

24–66 mm (multi-

core); 14–35 mm

(single-core)

DC input power

cable

PV cable that

meets the 1500 V

standard

•

Conductor cross-

sectional area: 4–6

mm2

•

Cable outer diameter:

4.7–6.4 mm

No.

Item

Type

Specifications

Description

RS485

communication

s cable

Outdoor shielded

twisted pair cable

•

Conductor cross-

sectional area: 0.25–

mm2

•Cable outer diameter:

4–11 mm

When three

communications cables

connect to the signal

cable connector, the

outer diameter of the

cables should be 4

–8

mm.

(Optional)

Power cable of

the tracking

system

Three

core outdoor

copper cable with

dual

-layer

protection

•

Conductor cross-

sectional area: 10

mm2

•Cable outer diameter:

15–18 mm

Note a: The value is valid only if the conductors of the PE cable and AC power cable use the same

material. If the materials are different, ensure that the conductor cross

-sectional area of the PE

cable produces a conductance equivalent to that of the area S/2

. The specifications of the PE cable

are subject to this table or calculated according to IEC 60364

-5-54.

Note b: You are advised to use a soft cable to prevent poor terminal contact due to the bending

stress of the cable

. The cable diameter must comply with local cable standards. The factors that

affect cable selection include the rated current, cable type, routing mode, ambient temperature, and

maximum expected line loss.

Installing the PE Cable

4.2

•It is recommended that the PE cable

be connected to a nearby PE point.

Connect the PE points of all

SUN2000s in the same PV array to

ensure equipotential connections to PE

cables.

•To enhance the corrosion resistance of

a ground terminal, you are advised to

apply silica gel or paint on it after

connecting the PE cable.

Opening the Maintenance Compartment Door

4.3

•Do not open the host panel of the SUN2000.

•Before opening the SUN2000 maintenance compartment door, turn off the downstream AC

output switch and three DC switches at the bottom.

•Do not open the maintenance compartment door in rainy or snowy days. If you must, take

protective measures to prevent rain or snow from entering the maintenance compartment.

•Do not leave unused screws in the maintenance compartment.

1. Loosen the screws on the maintenance

compartment door. 2. Open the maintenance compartment door

and adjust the support bar.

Crimping

module

(Optional) Replacing the Crimping Module

4.4

3. Remove the crimping modules that are bound in the maintenance compartment and save them

properly for future use.

If the AC output power cable has a single core, replace the crimping module.

For some models, a three-hole rubber plug is bound in the maintenance compartment. After

removing the rubber plug, save it properly for future use

(Optional) Installing the Solar Tracker Power Cable

4.6

1. A switch-disconnector-fuse or fuse-switch-disconnector with a voltage of no less than 800 V,

current of 16 A, and protection type of gM needs to be installed between the SUN2000 and the

tracker controller for protection.

2. The cable between the wiring terminal on the power cable and the switch-disconnector-fuse or

fuse-switch-disconnector should be less than or equal to 2.5 meters.

Removing the Rubber Rings from the Crimping Module

4.5

Use scissors to cut off the joints of the rubber rings to remove them. All rubber rings are removed in

the same way.

Otros manuales para SUN2000-196KTL-H0

Tabla de contenidos

Otros manuales de Inversor de Huawei

Huawei

Huawei SUN2000-200KTL-H2 Manual de usuario

Huawei

Huawei SUN2000-5KTL-M1 Manual de usuario

Huawei

Huawei iSitePower-M ISP-M-MAB05B1 Manual de usuario

Huawei

Huawei SUN2000-15KTL-50KTL-M3 Series Manual de usuario

Huawei

Huawei SUN2000 12K-MB0 Manual de usuario

Huawei

Huawei SUN2000L-2KTL Manual de usuario

Huawei

Huawei PowerCube 5000 Manual de usuario

Huawei

Huawei SUN2000-55KTL Manual de usuario

Huawei

Huawei SUN2000L-5KTL Manual de usuario

Huawei

Huawei SUN2000-8KTL Manual de usuario

Huawei

Huawei SUN2000-90KTL Manual de usuario

Huawei

Huawei iSitePower-M V100R002C00 Manual de usuario

Huawei

Huawei SUN2000-75KTL-M1 Manual de usuario

Huawei

Huawei SUN2000-30KTL-A Manual de usuario

Huawei

Huawei SUN2000 Series Manual de usuario

Huawei

Huawei SUN2000-8KTL Manual de usuario

Huawei

Huawei SUN2000-55KTL Manual de usuario

Huawei

Huawei SUN2000-63KTL-JPH0 Manual de usuario

Huawei

Huawei SUN2000-250KTL Series Manual de usuario

Huawei

Huawei SUN2000 M0 Series Manual de usuario

Huawei

Huawei SUN2000L Series Manual de usuario

Huawei

Huawei SUN2000-33KTL-JP Manual de usuario

Huawei

Huawei SUN2000 Series Manual de usuario

Huawei

Huawei SUN2000 Series Manual de usuario

Manuales populares de Inversor de otras marcas

Fourgroup

Fourgroup Easy Manual de usuario

Velleman

Velleman PI300M Manual de usuario

Sungrow

Sungrow SG350HX-US Manual de usuario

WilTec

WilTec 61897 Manual de usuario

SMA

SMA SUNNY BOY STORAGE 2.5 Manual de usuario

Simplicity

Simplicity LANDLORD 316 Manual de usuario

Santak

Santak SMAX 3000 Manual de usuario

ATON

ATON RA.Store-3 Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Manual de usuario

Tektronix

Tektronix CFG250 Manual de usuario

Champion

Champion 200989 Manual de usuario

Vanner

Vanner 20-500 Series Manual de usuario

GE GEP Manual de usuario

Astrel Group

Astrel Group Power Reducer Guía rápida

MULTIQUIP

MULTIQUIP GDP-5H Guía

GoWISE

GoWISE PS1007 Manual de usuario

Promate

Promate PM13500D ES Manual de usuario

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Manual de usuario