Huawei HG532e Manual de usuario

HG532e Home Gateway

User Guide

HUAWEI TECHNOLOGIES CO., LTD.

HG532e Home Gateway

V100R001

User Guide

202485_03

Huawei Technologies Co., Ltd. provides customers with comprehensive

technical support and service. Please feel free to contact our local office

or company headquarters.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website: http://www.huawei.com

Email: mobile@huawei.com

rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means

without prior written consent of Huawei Technologies Co., Ltd.

The product described in this manual may include copyrighted software of Huawei

Technologies Co., Ltd and possible licensors. Customers shall not in any manner

reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse

engineer, lease, assign, or sublicense the said software, unless such restrictions are

prohibited by applicable laws or such actions are approved by respective copyright

holders under licenses.

Trademarks and Permissions

, , and

are trademarks or registered trademarks of Huawei

Technologies Co., Ltd.

Other trademarks, product, service and company names mentioned are the property of

their respective owners.

Notice

Some features of the product and its accessories described herein rely on the software

installed, capacities and settings of local network, and may not be activated or may be

limited by local network operators or network service providers. Thus the descriptions

herein may not exactly match the product or its accessories you purchase.

Huawei Technologies Co., Ltd reserves the right to change or modify any information or

specifications contained in this manual without prior notice or obligation.

NO WARRANTY

THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS’’. EXCEPT AS

REQUIRED BY APPLICABLE LAWS, NO WARRANTIES OF ANY KIND, EITHER

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR

CONTENTS OF THIS MANUAL.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO CASE

SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE FOR ANY SPECIAL,

INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOST PROFITS,

BUSINESS, REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.

Import and Export Regulations

Customers shall comply with all applicable export or import laws and regulations and will

obtain all necessary governmental permits and licenses in order to export, re-export or

import the product mentioned in this manual including the software and technical data

therein.

Please refer to our privacy policy on our websites for the information about how we

protect your personal information.

Contents

1Connecting the Cables and Getting Started................................... 1

1.1 Connecting Cables ........................................................................1

1.2 Powering On the HG532e..............................................................2

2Setting Network Access Parameters.............................................. 2

2.1 Logging In to the Web-based Configuration Utility..........................2

2.2 Configuring a Wireless Account.....................................................3

2.3 Configuring a Dial-up Connection for Internet Access .....................3

3Setting Up a Wireless Connection ................................................. 4

3.1 Setting Up a Wireless Connection Using the WPS Button ................5

3.2 Setting Up a Wireless Connection Manually....................................5

4Configuring the HG532e .............................................................. 7

4.1 Changing the User Name and Password for the Web-based

Configuration Utility...........................................................................7

4.2 Enabling or Disabling the Wireless Network Function .....................7

Using the WLAN Button ..............................................................7

Using the Web-based Configuration Utility ....................................8

4.3 Changing the Wireless Network Name and Password.......................8

4.4 Restoring Default Settings .............................................................9

4.5 Restarting the HG532e ..................................................................9

5FAQs ......................................................................................... 10

6Technical Specifications.............................................................. 16

6.1 Indicators ...................................................................................16

6.2 Ports and Buttons........................................................................18

6.3 Default Settings ..........................................................................19

6.4 Product Specifications.................................................................19

1 Connecting the Cables and Getting Started

Thank you for purchasing the HG532e Home Gateway (hereinafter referred to

as the HG532e).

1.1 Connecting Cables

The following figure shows an example of how to connect the cables. In this

example, the HG532e is connected to a desktop computer, a laptop computer,

and a telephone.

1. Power adapter

2. Desktop computer

3. Telephone

4. Splitter

5. Telephone wall jack

6. Laptop computer

a. MODEM port

b. PHONE port

c. LINE port

1.2 Powering On the HG532e

After connecting the cables, press the On/Off button on the side panel to power

on the HG532e.

The ADSL indicator lights up and starts blinking. This indicates that the

asymmetric digital subscriber line (ADSL) port activation is in progress. The

blinking may last from 40 seconds to 3 minutes. When the ADSL indicator stops

blinking and remains on, indicates that the HG532e is working correctly.

To power off the HG532e, press the On/Off button on the side

panel, and then unplug the power adapter.

2 Setting Network Access Parameters

2.1 Logging In to the Web-based Configuration

Utility

Most parameters of the HG532e are preset before delivery to meet common

application scenarios at home. To check the HG532e's working status or to

configure certain advanced network functions, use the web-based configuration

utility.

To log in to the web-based configuration utility:

Step 1 Launch a browser on your computer. Enter http://192.168.1.1 in the

address box, and press Enter.

Step 2 On the login page, enter your user name and password.

By default, both the user name and password are user.

For security reasons or to make the user name and password easy

to remember, you can change them.For details, see section 4.1

"Changing the User Name and Password for the Web-based

Configuration Utility".

Step 3 Click Login.

After verification, the web-based configuration utility is displayed.

The first time you log in to the web-based configuration utility, a

configuration wizard is displayed. To skip the wizard and further

configure your HG532e, click Here when the following message

displays: Click Here to enter the advanced configuration page.

2.2 Configuring a Wireless Account

The configuration wizard page is displayed when wireless parameters have not

been modified. To set the user name and password for wireless connection on

the wizard page, do as follows:

Step 1 Log in to the web-based configuration utility.

Step 2 On the Quick Configure Home Gateway: Wireless Network page,

set WLAN SSID and Key, and click Next.

After you set WLAN SSID and Key, the home page of the web-based

configuration utility is displayed. A navigation menu is displayed on the left. You

can click a link to display the relevant page on the right.

2.3 Configuring a Dial-up Connection for Internet

Access

The HG532e works in bridge mode by default. To set up a dial-up connection for

Internet access, you must install and configure PPP dial-up software. The

following example uses a computer running the Windows XP operating system

to describe how to set up a dial-up connection:

Check the label on the HG532e's rear panel for WLAN SSID and

Key.

The preceding configuration needs to be performed only once. You

can also configure the WLAN SSID and Key by choosing Basic >

WLAN. For details, see section 4.3 "Changing the Wireless Network

Name and Password".

For security reasons or to make the wireless network name

password easy to remember, you can change them. For details,

see section 4.3 "Changing the Wireless Network Name and Password”.

Step 1 Choose start > All Programs > Accessories > Communications >

Network Connections.

Step 2 In Network Tasks, click Create a new connection. In the New

Connection Wizard window, click Next.

Step 3 Select Connect to the Internet, and click Next.

Step 4 Select Set up my connection manually, and click Next.

Step 5 Select Connect using a broadband connection, and click Next.

Step 6 In ISP Name, enter a name for the dial-up connection, and click Next.

Step 7 Select Anyone's use or My use only, and click Next.

Step 8 Enter the user name and password provided by your operator for

dial-up connections, and click Next.

Step 9 Select Add a shortcut to this connection to my desktop, and click

Finish.

The preceding steps need to be performed only once. After you complete the

procedure, a dial-up connection icon will appear on your computer desktop.

To connect to the Internet, double-click the dial-up connection icon, and click

Connect in the dialog box.

3 Setting Up a Wireless Connection

If a wireless network adapter is available on your computer, you can connect

your computer to the HG532e over a wireless connection.

The method for installing the wireless adapter and its driver varies

according to different vendors. For details, see the installation guide

provided by the vendor of your wireless adapter.

The wireless network function is enabled on the HG532e before delivery. To

check the function status, see section 4.2 "Enabling or Disabling the Wireless

Network Function".

There are two methods for setting up a wireless connection between the

HG532e and your computer.

3.1 Setting Up a Wireless Connection Using the

WPS Button

The HG532e supports the Wi-Fi Protected Setup (WPS) function in Push

Button Configuration (PBC) mode. If your wireless network adapter also

supports the WPS function, do the following to connect your computer to the

HG532e wirelessly:

Step 1 Press and hold the WPS button for over 1 second on the side panel of

the HG532e.

The WPS indicator on the HG532e starts blinking, indicating that the

HG532e is in the WPS negotiation state.

Step 2 Within 2 minutes, enable the WPS negotiation function on the

computer.

Wait for a while. The WPS indicator of the HG532e stops blinking and

remains on, indicating that a wireless connection is set up between the

HG532e and the computer.

You need to wait for 10 seconds to 120 seconds.

The WPS indicator is on for about 300 seconds, and then turns off.

3.2 Setting Up a Wireless Connection Manually

If your network adapter does not support the WPS function, you can set up

a wireless connection manually.

The following example uses a computer running the Windows XP operating

system to describe how to set up a wireless connection using the

default wireless network name and password:

Step 1 Start the wireless configuration service of the Windows XP operating

system as follows:

1. Right-click My Computer to display a short-cut menu, and choose

Manage.

2. In the Computer Management window, choose Computer

Management (Local) > Services and Applications > Services.

3. Right-click Wireless Zero Configuration to display a shortcut

menu, and choose Properties.

4. Check that Service status is Started. If Service status is not

Started, click Start.

5. Click OK to close the dialog box, and then close the Computer

Management window.

Step 2 Find the wireless network name (SSID) and its password (WLAN Key)

printed on the label on the HG532e's rear panel.

Step 3 Configure the wireless network connection on the computer as

follows:

1. Choose start > All Programs > Accessories > Communications >

Network Connections.

2. In the Network Connections window, right-click Wireless Network

Connection to display a shortcut menu, and choose Properties.

3. In the Wireless Network Connection Properties dialog box, click

the Wireless Networks tab.

4. Select Use Windows to configure my wireless network settings.

5. Click View Wireless Networks.

6. In the Wireless Network Connection dialog box, select

the wireless network whose name is the same as the one you

recorded in Step 2, and click Connect.

7. In the dialog box, enter the password you recorded in Step 2, and

click Connect.

After the system verifies the password, Connected appears on

the wireless network icon in the wireless network list, indicating that your

computer has established a wireless connection to the HG532e.

8. Close the Wireless Network Connection dialog box.

You need to set up a wireless connection only once. Then you can

access the wireless network anytime you want as long as that

the wireless network name and password are not changed. When

the HG532e is working properly, your computer connects to the

HG532e automatically after its wireless function is enabled.

Otros manuales para HG532e

Tabla de contenidos

Otros manuales de Puerta de Huawei

Huawei

Huawei DBS3900 IBS Guía

Huawei

Huawei B970b Manual de usuario

Huawei

Huawei DAU eA300-8a Manual de usuario

Huawei

Huawei HG659B Manual de usuario

Huawei

Huawei EchoLife HG520 Manual de usuario

Huawei

Huawei HG655d Manual de usuario

Huawei

Huawei B68A Manual de usuario

Huawei

Huawei HG659 Manual de usuario

Huawei

Huawei eA260 Series Manual de usuario

Huawei

Huawei BTS3902E WCDMA Guía

Huawei

Huawei Echolife HG520b Manual de usuario

Huawei

Huawei HG630 Manual de usuario

Huawei

Huawei B200 Series Manual de usuario

Huawei

Huawei B686 Manual de usuario

Huawei

Huawei HG256s Manual de usuario

Huawei

Huawei B890-75 Manual de usuario

Huawei

Huawei eSpace EGW1520A Manual de usuario

Huawei

Huawei EchoLife HG532 Manual de usuario

Huawei

Huawei E960 HSDPA Manual de usuario

Huawei

Huawei B315s-608 Manual de usuario

Huawei

Huawei eA360 Series Manual de usuario

Huawei

Huawei SmartAX MT841 Manual de usuario

Huawei

Huawei HG532s Manual de usuario

Huawei

Huawei Pocket WiFi 3G Manual de usuario

Manuales populares de Puerta de otras marcas

LST

LST M500RFE-AS Manual de usuario

Kinnex

Kinnex Media Gateway Manual de usuario

2N Telekomunikace

2N Telekomunikace 2N StarGate Manual de usuario

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manual de usuario

Telsey

Telsey CPVA 500 - SIP Manual de usuario

RTA

RTA 460A-NNA4 Hoja de especificaciones

Shaw

Shaw Gateway HDPVR Manual de usuario

ABB

ABB VSN900 Guía de inicio rápido

Commander

Commander Pulse Manual de usuario

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manual de usuario

NETGEAR

NETGEAR C6300BD Manual de usuario

Amit

Amit CDW531AM Manual de usuario

HMS

HMS Netbiter EasyConnect EC150 Manual de usuario

AT&T

AT&T U-verse 3801 Manual de uso y cuidado

Logic IO

Logic IO RTCU MX2 turbo Manual de usuario

Suttle

Suttle MediaMAX MXM-521 Manual de usuario

RTA

RTA 460MCBC-N2E Hoja de especificaciones