HTC Car Kit Manual de usuario

HTC Car Kit

Installation Guide

http://www.htc.com/www/support/warranty.html

ENGLISH

English

Overview

Thank you for purchasing the HTC Car Kit. We hope you enjoy

it! This Installation Guide will get you started and ready to

make the most of your car kit.

To ensure your safety on the road, please be careful when using

your phone with the car kit while driving.

Package content

The following items come with your package.

If any of them is damaged or missing, please contact your

dealer.

Car holder•

Car charger•

micro-USB cable•

Dashboard disc•

Installation guide•

91H02046-02M Rev.A

91H02046-02M Rev.A第1台12頁

金箭-9x9膠裝含封面116頁-百均

English

........................................................................................

Deutsch

......................................................................................

Français

.....................................................................................

Italiano

.......................................................................................

Español

.....................................................................................

........................................................................................

Português ............................................................................

....73

Türkçe

繁體中文

..............................................................................

.....

Русский

..................................................................................

...

Türk 103

.....................................................................................

ENGLISH

English

Overview

Thank you for purchasing the HTC Car Kit. We hope you enjoy

it! This Installation Guide will get you started and ready to

make the most of your car kit.

To ensure your safety on the road, please be careful when using

your phone with the car kit while driving.

Package content

The following items come with your package.

If any of them is damaged or missing, please contact your

dealer.

Car holder•

Car charger•

micro-USB cable•

Dashboard disc•

Installation guide•

91H02046-02M Rev.A

91H02046-02M Rev.A第1台12頁

金箭-9x9膠裝含封面116頁-百均

91H02285-00M Rev.A 金箭 -9x9 膠裝含封面 116 頁第 1 台 12 頁 - 百均

91H02046-02M Rev.A

91H02046-02M Rev.A第1台12頁

金箭-9x9膠裝含封面116頁-百均

91H02285-00M Rev.A

ENGLISH

English

About your car kit

Cradle

micro-USB

connector slot

Car holder base

Suction

pad tab

Base wheel

Swivel neck

ENGLISH

English

Mounting the car holder

You can mount the car holder

either on your car windshield or

dashboard.

Mounting the car holder on the windshield

To securely mount the car holder on the windshield, do the

following:

1Peel off the protective plastic sheet from the suction pad.

2Place the car holder onto your windshield. Be sure that the

suction pad tab is facing down.

3Press the base rmly on

the windshield. Then, turn

and tighten the base wheel

clockwise to make sure the

base is securely locked in

place.

ENGLISH

English

About your car kit

Cradle

micro-USB

connector slot

Car holder base

Suction

pad tab

Base wheel

Swivel neck

ENGLISH

English

Mounting the car holder

You can mount the car holder

either on your car windshield or

dashboard.

Mounting the car holder on the windshield

To securely mount the car holder on the windshield, do the

following:

1Peel off the protective plastic sheet from the suction pad.

2Place the car holder onto your windshield. Be sure that the

suction pad tab is facing down.

3Press the base rmly on

the windshield. Then, turn

and tighten the base wheel

clockwise to make sure the

base is securely locked in

place.

ENGLISH

English

Mounting the car holder on the dashboard

To securely mount the car holder on the dashboard, do the

following:

Do not mount the car holder on the top of an air bag or within

the working range of an airbag.

1Remove the adhesive peel (if any) from the dashboard disc.

2Attach the adhesive side of

the dashboard disc on your

dashboard.

3Place the car holder on top

of the dashboard disc. Be

sure that the suction pad

tab is facing down.

4Press the base rmly. Then,

turn and tighten the base

wheel clockwise to make

sure the base is securely

locked in place.

ENGLISH

English

Adjusting the car holder

Before placing your phone on the cradle of the car holder,

adjust the cradle rst to the angle and orientation that you

prefer. Refer to the following guidelines to avoid accidentally

breaking or damaging the cradle.

When adjusting the cradle, DO NOT exceed the maximum tilt or

rotate angle. If the cradle stops in the direction where you are

rotating or tilting it, DO NOT force it further to avoid damage or

breakage.

Adjusting the swivel neck

Hold the swivel neck rmly to adjust the

cradle to an upright position that you

want.

The maximum tilt angle of the swivel

neck is 45°.

ENGLISH

English

Mounting the car holder on the dashboard

To securely mount the car holder on the dashboard, do the

following:

Do not mount the car holder on the top of an air bag or within

the working range of an airbag.

1Remove the adhesive peel (if any) from the dashboard disc.

2Attach the adhesive side of

the dashboard disc on your

dashboard.

3Place the car holder on top

of the dashboard disc. Be

sure that the suction pad

tab is facing down.

4Press the base rmly. Then,

turn and tighten the base

wheel clockwise to make

sure the base is securely

locked in place.

ENGLISH

English

Adjusting the car holder

Before placing your phone on the cradle of the car holder,

adjust the cradle rst to the angle and orientation that you

prefer. Refer to the following guidelines to avoid accidentally

breaking or damaging the cradle.

When adjusting the cradle, DO NOT exceed the maximum tilt or

rotate angle. If the cradle stops in the direction where you are

rotating or tilting it, DO NOT force it further to avoid damage or

breakage.

Adjusting the swivel neck

Hold the swivel neck rmly to adjust the

cradle to an upright position that you

want.

The maximum tilt angle of the swivel

neck is 45°.

ENGLISH

English

Adjusting the cradle

Rotate the cradle gently to adjust it to an upright or horizontal

orientation so that it can hold your phone in vertical or in

horizontal position.

Adjust cradle to horizontal orientation will automatically

rotate Car UI to landscape mode.

ENGLISH

English

Docking your phone on the cradle

Place your phone inside the cradle and

align your phone USB connector with the

micro-USB connector slot of the cradle.

Attaching the USB cable on the cradle of the car

holder

Plug the supplied USB cable to the

micro-USB connector slot of the

cradle. Be sure to push it fully until

you hear a clicking sound.

To detach the USB cable:

Press both sides of the clip to release it from the

slot.

ENGLISH

English

Adjusting the cradle

Rotate the cradle gently to adjust it to an upright or horizontal

orientation so that it can hold your phone in vertical or in

horizontal position.

Adjust cradle to horizontal orientation will automatically

rotate Car UI to landscape mode.

ENGLISH

English

Docking your phone on the cradle

Place your phone inside the cradle and

align your phone USB connector with the

micro-USB connector slot of the cradle.

Attaching the USB cable on the cradle of the car

holder

Plug the supplied USB cable to the

micro-USB connector slot of the

cradle. Be sure to push it fully until

you hear a clicking sound.

To detach the USB cable:

Press both sides of the clip to release it from the

slot.

ENGLISH

English

To adjust the USB cable length:

Wrap the cable around the swivel neck

and route it through the suction pad tab.

Position it where it does not block your

vision when driving.

Charging your phone with the car charger

When your phone battery runs low, you can use the supplied

car charger to charge the battery.

1Place your phone inside the

cradle and connect it with

USB cable.

2Connect the other end of the

USB cable to the car charger.

3Plug in the car charger to the

cigarette lighter socket of your

car.

1110

ENGLISH

English

Unmounting the car holder

1Remove your phone from the

cradle of the car holder.

2Turn the base wheel

counter-clockwise to release

the car holder base.

3Pull the tab on the suction pad

and detach the car holder from the

windshield or dashboard disc.

Taking care of your car kit

Remove your phone from the cradle of the car holder•

when you leave the car to avoid prolonged exposure to

heat.

Do not force if the cradle stops in the direction you are•

rotating or tilting it further to avoid damage.

Tabla de contenidos

Otros manuales de Teléfono móvil de HTC

Manuales populares de Teléfono móvil de otras marcas

Zte

Zte BLADE A520 Manual de usuario

Nokia

Nokia Lumia 620 Manual de usuario

Blackbe;rry

Blackbe;rry KEYone Manual de usuario

Bea-fon

Bea-fon X5 Premium Manual de usuario

Blackbe;rry

Blackbe;rry 8707 Series Manual de usuario

Blackbe;rry

Blackbe;rry Storm Instrucciones de funcionamiento

LG LM-X420QN Manual de usuario

LifeWatch

LifeWatch V Manual de usuario

Bea-fon

Bea-fon SILVER LINE SL860 Manual de usuario

IKI Mobile

IKI Mobile KF4.5i Manual de usuario

Hitech

Hitech HT-850 Manual de usuario

Yezz

Yezz Fashion F10 Manual de usuario

Point Mobile

Point Mobile PM60 Manual de usuario

Blackbe;rry

Blackbe;rry Q10 Manual de usuario

Blackbe;rry

Blackbe;rry Bold 9900 Manual de usuario

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Manual de usuario

LG LM-K420EMW Manual de usuario

ISAFE MOBILE

ISAFE MOBILE IS655.2 Manual de usuario