HPRT MPD2 Manual de usuario
MPD2 User Manual
www.hprt.com
REVISION RECORDS
REV.
DATE
DESCRIPTION
Drawn
Checked
Approved
1.0
2013.04.10
First edition
Chen Weihua
Lin Y0ang
Ren Xiaowei
1.1
2013.06.07
1.Some changes about "descriptions
of replace the ribbon" on P11.
Chen Weihua
Lin Yang
Ren Xiaowei
1.2
2013.06.10
1.Some changes about "descriptions
of replace the ribbon" on P11;
“descriptions of Install printer paper”
on P15.
Chen Weihua
Lin Yang
Ren Xiaowei
1.3
2013.07.08
1.Add a statement.
Chen Weihua
Lin Yang
Ren Xiaowei
1.4
2013.10.22
1.Add product instructions.
Chen Weihua
Lin Yang
Ren Xiaowei
1.5
2015.11.02
1.Adjust the format of the manual.
Lin Yun
Yang Kaiqu
Ren Xiaowei
MPD2 User Manual
www.hprt.com
Statement
This manual content may be altered without permission, and Xiamen Hanin Electronic Technology
Co.,Ltd. reserves the rights to make changes without notice in technology, spare parts, hardware
and software of the products. If more information is needed about the products, please contact
Xiamen Hanin Electronic Technology Co.,Ltd. Without any written permission from the company,
any section of this manual is prohibited to be copied or transferred in any form.
Copyright
This manual is printed in 2015, the copyright belongs to Xiamen Hanin Electronic Technology Co.
Ltd.
Printed in China
1.5 Version
Warnings
This must be complied with in order to avoid any damage to the human body and to the
This is showing the important information and tips for the printer operating.
Note
：
Due to continuous improvement of our product, the description of printer specification,
accessories, design in this manual may slightly different, please in kind prevail.
MPD2 User Manual
www.hprt.com
Content
Precautions.............................................................................................................................................1
1. Safety Precautions....................................................................................................................... 1
2. Operation Precautions.................................................................................................................1
3. Storage Precautions.....................................................................................................................1
4. Battery Safety Precautions.......................................................................................................... 2
Chapter 1 Appearance and Accessories.............................................................................................. 3
1.1 Appearance................................................................................................................................3
1.2 Packing List................................................................................................................................ 4
Chapter 2 Specification....................................................................................................................... 5
Chapter 3 Method of Application........................................................................................................6
3.1 the Preparation Before Using.................................................................................................... 6
3.1.1 Install Battery.................................................................................................................. 6
3.1.2 Replace the Ribbon......................................................................................................... 6
3.1.3 Install Printer Paper......................................................................................................... 7
3.2 the Basic Function Using........................................................................................................... 7
3.2.1 Power On/ Power Off...................................................................................................... 7
3.2.2 Printing the Selftest Page................................................................................................ 8
3.2.3 Paper Feeding(Manual Paper Feeding)........................................................................... 8
3.2.4 the Use of the Battery and Battery Power Charge..........................................................8
3.3 Communication Interfaces........................................................................................................ 9
3.3.1 RS232 Serial Interface......................................................................................................9
3.3.2 Infrared Ray: IR Interface.................................................................................................9
3.3.3 Bluetooth Interface....................................................................................................... 10
3.4 Other Functions.......................................................................................................................11
3.4.1 Sleep Mode....................................................................................................................11
3.4.2 Paper Near End Alarm................................................................................................... 11
3.5 Parameter Setting....................................................................................................................11
3.6 LED Indicator and Buzzer Definition........................................................................................12
Chapter 4 Other Information............................................................................................................ 13
4.1 Printer Technical Manual.........................................................................................................13
4.2 Preprinted Black Mark Specification....................................................................................... 13
MPD2 User Manual
www.hprt.com
1
Precautions
1. Safety Precautions
1) Be sure to use the specified battery and power source provided by our company.
Connection to an improper power source may cause fire, explosion or damage to the
printer.
2) Don’t put the battery into the fire or water, don’t disassemble or modify the battery, don’t
be short circuit, otherwise may result in injury or fire even explosion.
3) If the printer would not be used for a long time, be sure to take off the battery, otherwise
the battery may leak liquid which is corrosive, if improper operation causes battery leak, and
the liquid is spattered on the skin or clothes, please wash it with water, if spattered in the
eyes, please rinse them with water thoroughly and see a doctor.
4) Please do not open the paper case cover when it is printing or just when printing is over, do
not touch the print head with hand or body, overheat may cause scald.
2. Operation Precautions
1) Be sure not to print continuously over 1 meter, otherwise may cause damage to the print
head.
2) Water or other liquid should not spill into the printer, also the printer should not be
appeared in the rain, or else may cause printer damage.
3) Please do not open the paper case cover when it is printing, otherwise the printer may work
improperly.
4) If print with serial interface, should not unplug the interface cable in the course of printing,
or else some printing data may be lost.
5) When print in IR or IrDA mode, be sure the Ir window of the host equipment face rightly the
IR window of the printer, the distance should be within the range of 50cm, and the angle
should be within the range of 30°.
6) When print with Bluetooth interface, the communication distance should be within 10
meters, otherwise the printer doesn’t print or prints rubbish codes.
7) Too high(50℃) or too low(-10℃) temperature and too high(85％) or too low(20％)relative
humidity both effect the print quality.
8) The print paper in poor quality or stored for too long time also may reduce the print quality
even damage the printer.
9) In the black mark detecting mode, the printer requires that the preprinted black mark is
accordant with the black mark specifications (details please refer to 4.2), otherwise the
black mark can not be detected correctly.
10) Be sure to use up the power of the battery before charge it, as it can ensure the using life of
the battery.
3. Storage Precautions
1) The printer should be placed in such an environment that the temperature is between -20℃
and 70℃, and the relative humidity is between 5% and 95%.
2) If the printer will be stored for a long time, pleas be sure to take out the battery, otherwise
may damage the battery and printer.
3) Normal thermal paper can’t be kept too long, if you need to keep the receipt for a long
MPD2 User Manual
www.hprt.com
2
period, please choose long term effective thermal paper.
4) The print paper should be keep away from high temperature environment and point-blank
sunshine.
4. Battery Safety Precautions
Be sure to read carefully the user manual before using the product. Ignore the following
instructions may cause battery overheating, fire, explosion, damage and / or performance, and
reduce product life.
1) Do not allow water, sea water from entering or leaking into the battery inside. If the
batteries internal safety device burn, when charging it, it may produce any abnormal current
and/or voltage, and cause any abnormal chemical reaction, then may cause the battery
overheating, fire and/or explosion.
2) Do not use or place the battery nearby the stove or other high temperature places.
Excessive heat maybe damage the resin shell and/or the insulation materials, thereby cause
short-circuit inside the battery, then the battery may be caused overheating, burning and/or
explosion.
3) When charging, use a specified charger Other conditions (high temperature, high
pressure/high current, using the modified battery charger, etc.) excluded here may result in
over-charging the battery and abnormal current and/or voltage, cause abnormal chemical
reaction, and may cause the battery overheat, light and/or explosion.
4) Battery clearly marks with positive and negative. When connect the battery with the charger
and/or printer, be sure to verify the correct battery orientation. Reverse insertion will cause
the reverse charging and may cause abnormal chemical reaction, and then may cause the
battery overheat, ignite, and/or explosion.
5) Do not make the battery contact with the power outlet and/or car cigarette lighter socket.
This may cause high pressure and excessive current, and lead to the battery overheat,
burning and/or explosion.
6) Do not heat the battery or put the battery into fire. This may melt insulation material and/or
damage safety devices or safety equipment, then ignite electrolytic solution, and cause the
battery overheat, burning and/or explosion.
7) Do not use the battery with contrary(+) and (-) Location. In the charging process, this will
cause the reverse charging and may cause abnormal chemical reaction. During use, may
appear unpredictable current exception, and cause the battery overheat, ignite, and/or
explosion.
8) Do not make the battery (+) and (-) contact with any metal. Also, do not carry along or store
batteries with metal objects, such as necklaces, hair clips and so on. Battery internal short
circuit may cause excessive current, and lead to the battery overheat, ignite, and/or
explosion and the adjacent metal objects (necklaces, hairpins, etc.) may be overheating.
9) Do not throw or heavy attack the battery. If internal safety device of the batteries burn, the
battery charging may cause any abnormal current and/or voltage, and abnormal chemical
reaction, and lead to the battery overheat, ignite, and/or explosion.
MPD2 User Manual
www.hprt.com
3
Chapter 1 Appearance and Accessories
1.1 Appearance
1.Li-ion Battery Cover 2.Infrared Interface 3.Charging Interface 4.USB/RS232 Interface
5.Function Indicator 6.Power Indicator 7.Power Button 8.Feed Button
9.Top Cover 10.Infrared Ray (IR) Interface 11.Bottom Case 12.Paper Cover
MPD2 User Manual
www.hprt.com
4
1.2 Packing List
MPD2 User Manual
www.hprt.com
5
Chapter 2 Specification
Model
MPD2
Physical parameters
Dimension
106*96*45（L*W*H）mm
Weight
257g（without paper roll）
Paper roll diameter
≤40mm
Print specs.
Printing method
Dot-matrix printing
Valid printing width
57.5±0.5mm
Dots/line
144dots
Printing speed
7mm/s
Paper thickness
0.06~0.085mm
Copy capability
One original, one copy
Black mark detection
yes
Reliability
1,500,000 lines
Resident fonts
ASCII（12*6，16*8）GB2312（12*12，16*16）
Printable content
English, Number, Symbol, Graph, Curved line, Previous stored
icon
Printing column
24 columns（6*12 dot matrix）
Interface
Wired
USB /RS232(optional)
Wireless
IrDA/SIR/VIR
BLUETOOTH V2.0 CLASS2
Power supply
Battery
830mAh/7.4V rechargeable Li-ion battery
Adaptor
12V/500mA
Printing length
40m（12.5% printing density）
Environment
Working condition
-10℃~50℃/20%~80%RH
Charging condition
5℃~35℃/20%~80%RH
Storage condition
-20℃~70℃/5%~95%RH
MPD2 User Manual
www.hprt.com
6
Chapter 3 Method of Application
3.1 the Preparation Before Using
3.1.1 Install Battery
The MPD2 is supplied by battery, please install battery before using the printer.
As in the following figures:
1.Keeping printer inversion and open the battery cover.
2.Install the battery into battery cover, please pay attention direction of anode and cathode.
3.Close the battery cover.
As the picture to get off battery
Notes:
The printer just allows to use battery that our company appoint ,or it may damage the printer and
case battery leakage ,even explode.
3.1.2 Replace the Ribbon
1) Take each end of the top cover in one hand and open the paper cover;
2) Hold on paper to take out of print paper directly;
3) Take each end of the old ribbon in one hand and pull out the ribbon.
Tabla de contenidos
Otros manuales de Impresora de HPRT
HPRT
HPRT HM-E200 Manual de usuario
HPRT
HPRT TP806L Manual de usuario
HPRT
HPRT MT810 Manual de usuario
HPRT
HPRT TP809 Manual de usuario
HPRT
HPRT MPT8 Manual de usuario
HPRT
HPRT HT100 Manual de usuario
HPRT
HPRT TP80K Manual de usuario
HPRT
HPRT HD100 Manual de usuario
HPRT
HPRT KP806 Manual de usuario
HPRT
HPRT TP801 Manual de usuario
HPRT
HPRT TP806L Manual de usuario
HPRT
HPRT MPT-II Manual de usuario
HPRT
HPRT HT130 Manual de usuario
HPRT
HPRT TP808 Manual de usuario
HPRT
HPRT Prime Manual de usuario
HPRT
HPRT TP Series Manual de usuario
HPRT
HPRT TP801 Manual de usuario
HPRT
HPRT TP80C Manual de usuario
HPRT
HPRT TP585 Manual de usuario
HPRT
HPRT FC53-Li Manual de usuario
