HP DESKJET 350 Manual de usuario
HP 350 Cloud-Managed
Dual Radio 802.11n
Access Point
Installation Guide
HP 350 Cloud-Managed 802.11n AP | Installation Guide 3
The HP 350 Cloud-Managed 802.11n Access Point [JL011A (WW), JL012A (US)]
supports the IEEE 802.11n standard for high-performance WLANs. This access point
uses MIMO (Multiple-in, Multiple-out) technology and other high-throughput (HT) mode
techniques to deliver high-performance, 802.11n 2.4GHz or 5 GHz functionality while
simultaneously supporting existing legacy wireless services. The HP 350 works only in
conjunction with the HP Cloud Network Manager.
The HP 350 provides the following capabilities:
lWireless transceiver
lProtocol-independent networking functionality
lIEEE 802.11a/b/g/n operation as a wireless access point
lIEEE 802.11a/b/g/n operation as a wireless air monitor
lCompatibility with IEEE 802.3af Power over Ethernet (PoE)
HP 350 Cloud-Managed 802.11n Access Point
Installation Guide
4 HP 350 Cloud-Managed 802.11n AP | Installation Guide
Package contents
lHP 350 Access Point
l9/16 inch and 15/16 inch ceiling railadapters
lDocumentation
Inform your supplier if there are any incorrect, missing, or damaged parts.
If possible, retain the carton, including the original packing materials. Use
these materials to repack and return the unit to the supplier if needed.
HP 350 hardware overview
Figure 1: LEDs
LEDs
The HP 350 is equipped with four LEDs that indicate the status of its various components.
l: Indicates whether or not the HP 350 is powered on and shows basic system
status.
l: Indicates the status of the Ethernet port
l: Indicates the status of the 802.11a/n radio
l: Indicates the status of the 802.11b/g/n radio
LED Color/State Description
Off No power to AP or initial power-up
Red Error condition
Green - Flashing AP booting
Green - Steady AP ready
Table 1: LED descriptions
HP 350 Cloud-Managed 802.11n AP| Installation Guide 5
6 HP 350 Cloud-Managed 802.11n AP | Installation Guide
LED Color/State Description
Off Ethernet link unavailable
Amber - Steady 10/100 Mbps Ethernet link established
Green - Steady 1000 Mbps Ethernet link established
Green - Flashing Ethernet link activity
Off 5 GHz radio disabled
Amber - Steady 5 GHz radio enabled in non-HT (802.11a) WLAN mode
Green - Steady 5 GHz radio enabled in HT (802.11n) WLAN mode
Green - Flashing 5 GHz radio operating as an air monitor
Off 2.4 GHz radio disabled
Amber - Steady 2.4 GHz radio enabled in non-HT (802.11b/g) WLAN
mode
Green - Steady 2.4 GHz radio enabled in HT (802.11n) WLAN mode
Green - Flashing 2.4 GHz radio operating as an air monitor
Console port
The serial console port allows you to connect the HP 350 to a serial terminal or a laptop
serialport.This port is a 4-pin connector covered by a dust cover.
Ethernet port
The HP 350 is equipped with a 10/100/1000 Base-T (RJ-45) auto-sensing, MDI/MDX
Ethernet port. This port is IEEE 802.3af PoE compliant.
HP 350 Cloud-Managed 802.11n AP| Installation Guide 7
8 HP 350 Cloud-Managed 802.11n AP | Installation Guide
Figure 2: Bottom panel
Ethernet Port
Kensington
Lock
Console Port DC Power Socket
Reset
Button
56
DC power socket
If PoE is not available, an optional HP 3xx Cloud-Managed Access Point Universal Power
Supply(sold separately) can be used to power the HP 350.
If both PoE and DC power are available, the HP 350 draws power from the
PoE source.
Kensington lock slot
The HP 350 is equipped with a Kensington lock slot for additional security.
Reset button
You can use the reset button to return the AP to factory default settings. To reset the AP:
1. Power off the AP.
2. Press and hold the reset button using a small, narrow object, such as a paper clip.
3. Power on the AP without releasing the reset button. The LED willflash within 5
seconds.
4. Release the reset button.
The LED will flash again within 15 seconds, indicating that the reset is complete. The
AP will now continue to boot with the factory default settings.
HP 350 Cloud-Managed 802.11n AP| Installation Guide 9
10 HP 350 Cloud-Managed 802.11n AP | Installation Guide
Before you begin
!
EU statement: Lower power radio LAN product operating in 2.4 GHz and
5 GHz bands
.
!
FCC statement: Improper termination of access points installed in the
United States configured to non-US model controllers will be in violation of
the FCC grant of equipment authorization. Any such willful or intentional
violation may result in a requirement by the FCC for immediate termination
of operation and may be subject to forfeiture (47 CFR 1.80).
AP preinstallation checklist
Before installing the HP 350, ensure that you have the following:
lCAT5e or CAT6 Ethernet cable of required length
lOne of the following power sources:
nIEEE 802.3af-compliant PoE source. Various PoE mid-span injectors and PoE
switches are available from HP.
nHP 3xx Cloud-Managed Access Point Universal Power Supply (sold separately).
Summary of the setup process
Successful setup of the HP 350 consists of four tasks, which must be performed in this
order:
Otros manuales para DESKJET 350
1
Tabla de contenidos
Idiomas:
Otros manuales de Punto de acceso inalámbrico de HP
HP
HP MSM323-R Manual de usuario
HP
HP MSM310-R Manual de usuario
HP
HP Aruba AP-63 Series Instrucciones de instalación
HP
HP 560 Series Manual de usuario
HP
HP Aruba 310 Series Manual de usuario
HP
HP ProCurve 420 Manual de usuario
HP
HP MSM422 Manual de usuario
HP
HP ProCurve 530 WW Instrucciones de montaje
HP
HP MSM313 Guía de referencia rápida
HP
HP A-WA2610E-AGN Instrucciones de montaje
HP
HP 650 Series Manual de usuario
HP
HP ProCurve 420 Manual
HP
HP Aruba Instant On AP25 Instrucciones de montaje
HP
HP MSM320 Manual de usuario
HP
HP ProCurve 420 Manual de usuario
HP
HP MSM410 Manual de usuario
HP
HP MSM3xx Manual de usuario
HP
HP J9374A Guía de instalación
HP
HP MSM430 Manual de usuario
HP
HP ProCurve MSM313-R Manual de usuario
