HP ElitePOS G1 Instrucciones de instalación
EL-MF877-00 Page 1
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Personal Computers
Marketing Name / Model
[List multiple models if applicable.]
HP ElitePOS G1 14 inch Touch AiO Retail System Model 141
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
3
Batteries
All types including standard alkaline and lithium
coin or button style batteries
1
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Includes background illuminated displays with gas
discharge lamps (14")
1
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing PCB/PCT)
0
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
0
External electrical cables and cords
Power cord
1
Gas Discharge Lamps
0
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
0
Components and waste containing asbestos
0
Components, parts and materials containing
refractory ceramic fibers
0
EL-MF877-00 Page 2
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Components, parts and materials containing
radioactive substances
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Electric screwdriver (Cross)
#1, Cross
Electric screwdriver (Cross)
#0, Cross
Electric screwdriver (Trox)
T15
Heating plate
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Follow steps described in Disassembly instruction (file attached)
2. If parts can be removed without using a tool, remove it first
3. Use correct screwdriver and torque value before unlock the screw.
4.
5.
6.
7.
8.
9.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
MANUFACTURING PROCESS INSTRUCTIONS
MECHANICAL ASSEMBLY
MODEL : Nantucket
Auditor ：Uen-Tung Uen-Tung
Tabulator：
Standard Operation Procedure
Document No. Nantucket FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Uen-tung NPSU-PPE
Auditor ：Uen-tung
1(1/2)
1.0
1.Take the Nantucket machine, the tension rises
before Nantucket and peeps out the Stand top
end to put the aperture and put the aperture .
2. Disassemble Nantucket & Stand
Disassemble Nantucket & Stand 2017/6/15
Fig.1
Fig.2
Standard Operation Procedure
Document No. Nantucket FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Uen-tung NPSU-PPE
Auditor ：Uen-tung
1(2/2)
1. Disassemble FPR Cable
2. Loosen BTCB screw ，Disassemble FPR &
BRKT
Disassemble FPR
2
1
1.0 2017/6/13
Fig.1
Electric cross screwdriver #1 1
Support fixture 1
Standard Operation Procedure
Document No. Nantucket FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Uen-tung NPSU-PPE
Auditor ：Uen-tung
2(1/2)
1. Disassemble Type C Cable
2. Loosen screw *4
3. Disassemble Stand(6055B0051101)
Disassemble Stand & Hub
1
23
4
1.0 2017/6/13
Fig.1 Fig.2
Electric cross screwdriver #1 1
Support fixture 1
Standard Operation Procedure
Document No. Nantucket FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Uen-tung NPSU-PPE
Auditor ：Uen-tung
2(2/2)
1. Disassemble Stand Type C cable
Disassemble Stand Type C cable 1.0 2017/6/13
Standard Operation Procedure
Document No. Nantucket FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Uen-tung NPSU-PPE
Auditor ：Uen-tung
3(1/1)
1.0 2017/6/13
圖一
1
23
4
1. Loosen Spacer screw*4
2. Disassemble Spacer
Disassemble Spacer
Electric cross screwdriver #1 1
Standard Operation Procedure
Document No. Nantucket FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Uen-tung NPSU-PPE
Auditor ：Uen-tung
4(1/3)
1.0 2017/6/13
圖一
1
2
1. Loosen Type C Cover screw*2
2. Disassemble Type-C Cover
Disassemble Type C Cover
Electric cross screwdriver #1 1
Standard Operation Procedure
Document No. Nantucket FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Step：
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Uen-tung NPSU-PPE
Auditor ：Uen-tung
4(2/3)
1.0 2017/6/13
1. Loosen front frame screw *3
1
2
3
Loosen screw
Electric cross screwdriver #0 1
Support fixture 1
Fig.1
Fig .2
Fig .3
Tabla de contenidos
Otros manuales de Terminal táctil de HP
HP
HP 13220 Manual
HP
HP Rp5000 - Point of Sale System Manual de usuario
HP
HP Rp5000 - Point of Sale System Manual del propietario
HP
HP Rp5000 - Point of Sale System Manual de usuario
HP
HP Photosmart 7100 Manual de usuario
HP
HP 2640N Manual de usuario
HP
HP Engage One Retail System 143 Manual de operación y mantenimiento
HP
HP ap5000 Instrucciones de uso
HP
HP Rp3000 - Point of Sale System Manual de usuario
HP
HP Rp5000 - Point of Sale System Manual de usuario
HP
HP 2624 Manual de usuario
HP
HP Rp5000 - Point of Sale System Guía de configuración
HP
HP RP7 Model 7800 Manual de usuario
HP
HP ap5000 Instrucciones de uso
HP
HP ap5000 Hoja de especificaciones
HP
HP Rp5000 - Point of Sale System Hoja de especificaciones
HP
HP rp5800 Manual de usuario
HP
HP RP7 Model 7800 Manual de operación y mantenimiento
HP
HP HP700/92 Manual de usuario
HP
HP Rp5000 - Point of Sale System Manual de usuario
