HP ProCurve 1400-24G Manual de usuario

Installation and Getting

Started Guide

www.procurve.com

ProCurve Switch 1400-24G

Installation and Getting Started Guide

The information contained herein is subject to change without notice.

This document contains proprietary information, which is protected by copyright. No part of this document may be photocopied,

reproduced, or translated into another language without prior written consent of Hewlett-Packard.

Publication Number

5991-6219

February 2007

Applicable Product

ProCurve Switch 1400-24G (J9078A)

Safety

Before installing and operating this product, please read the “Installation Precautions” in Chapter 2, “Installing the Switch”, and the safety

statements in Appendix B, “Safety and EMC Regulatory Statements”.

Disclaimer

HEWLETT-PACKARD COMPANY MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in

connection with the furnishing, performance, or use of this material.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and

services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors

or omissions contained herein.

Hewlett-Packard assumes no responsibility for the use or reliability of its software on equipment that is not furnished by Hewlett-Packard.

Warranty

See the Customer Support/Warranty booklet included with the product.

A copy of the specific warranty terms applicable to your Hewlett-Packard products and replacement parts can be obtained from your HP

Sales and Service Office or authorized dealer.

Contents

1 Switch Overview

Switch Hardware Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

LED Mode Select Button and Indicator LEDs . . . . . . . . . . . . . . . . . . . . 1-2

Switch Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

2 Installing the Switch

Included Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Installation Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

1. Prepare the Installation Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

2. Verify the Switch Passes Self Test . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

3. Mount the Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

4. Connect the Switch to a Power Source . . . . . . . . . . . . . . . . . . . . . . 2-10

5. Connect the Network Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10

6. Installing or Removing mini-GBICs . . . . . . . . . . . . . . . . . . . . . . . . . 2-11

3 Troubleshooting

Basic Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Diagnosing with the LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Diagnostic Tips: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Testing the Switch by Resetting It . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

ProCurve Networking Customer Support Services . . . . . . . . . . . . . . . . . . . 3-3

Before Calling Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

A Switch Specifications

Physical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Environmental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

Lasers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

B Safety and EMC Regulatory Statements

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

EMC Regulatory Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-8

C Recycle Statements

Waste Electrical and Electronic Equipment (WEEE) Statements . . . . . . C-1

Index

1-1

Switch Overview

Switch Hardware Features

The ProCurve Switch 1400-24G (J9078A)is a multiport switch that can be used

to build high-performance switched workgroup networks. This switch is a

store-and-forward device that offers low latency for high-speed networking.

Switch Ports

The switch has 24 auto-sensing 10/100/1000Base-T RJ-45 ports and two dual-

personality ports (ports 23 and 24). Because the RJ-45 ports support automatic

MDI/MDI-X operation, you can use straight-through cables for all network

connections to PCs or servers, or to other switches or hubs.

Dual-personality ports use either the 10/100/1000Base-T RJ-45 connector, or a

supported ProCurve mini-GBIC for fiber-optic connections. By default, the

RJ-45 connectors are enabled.

This switch is designed to be used primarily as a high-density wiring closet or

desktop switch. With this switch you can directly connect computers, printers,

and servers to provide dedicated bandwidth to those devices, and you can

build a switched network infrastructure by connecting the switch to hubs,

other switches, or routers.

ProCurve Switch 1400-24G

Power LED Port Link/Act and

Mode LEDs

LED Mode Select button

and indicator LEDs 10/100/1000Base-T

RJ-45 ports

Dual-personality ports

(10/100/1000Base-T or

mini-GBIC)

1-2

Switch Overview

Switch Hardware Features

Switch Overview

LEDs

The front panel of the switch provides statusLEDs for system monitoring. The

following table details the functions of the various indicators.

LED Mode Select Button and Indicator LEDs

To optimize the amount of information that can be displayed for each of the

switch ports, the ProCurve Switch 1400-24G uses a Mode LED for each port.

The operation of this LED is controlled by the LED Mode Select button on the

switch panel, and the current selection is indicated by the mode indicator

LEDs near the button. Press the button to change from one mode to the next.

System LED State Meaning

Power

(green)

On The switch is receiving power.

Off The switch is NOT receiving power.

LED Mode

Select

(2 green LEDs)

FDx Indicates the port Mode LEDs are lit for ports that are in full-duplex mode.

Speed Ports 1-24: Indicates the port Mode LEDs are lit for ports that are in 1000 Mbps mode.

The port Mode LEDs are off for ports operating at 10 or 100 Mbps.

Port LED State Meaning

Link/Act On The port is enabled and receiving a link indication from the connected device.

Off The port has no active network cable connected, or is not receiving link signal.

Flashing Indicates that there is network activity on the port.

Mode Depending on the mode selected, displays if the port is configured for full-duplex operation or

indicates the operating speed. See “LED Mode Select Button and Indicator LEDs” below for more

information.

LED Mode Select button

and indicator LEDs

Mode LEDs

1-3

Switch Overview

Switch Hardware Features

Switch Overview

■When the FDx (full duplex) indicator LED is on, the port Mode LEDs turn

on for those ports that are operating at full duplex.

■When the Speed indicator LED is on, the port Mode LEDs turn on for ports

operating at 1000 Mbps. The port Mode LEDs are off for ports operating

at 10 Mbps or 100 Mbps.

Switch Features

The features of the ProCurve Switch 1400-24G include:

■24 auto-sensing 10/100/1000Base-T RJ-45 ports.

■plug-and-play networking—all ports are enabled—just connect the

network cables to active network devices and your switched network is

operational.

■IEEE 802.3ab Auto MDI /MDI-X on all twisted-pair ports, meaning that all

connections can be made using straight-through twisted-pair cables.

Cross-over cables are not required, although they will also work. The pin

operation of each port is automatically adjusted for the attached device:

if the switch detects that a 10/100 Mbps switch or hub is connected to the

port, it configures the port as MDI; if the switch detects that a 10/100 Mbps

end-node device is connected to the port, it configures the port as MDI-X.

■automatic learning of the network addresses in each switch’s 8000-

address forwarding table.

■automatically negotiated full-duplex operation for all 10/100/1000Base-T

RJ-45 ports when connected to other auto-negotiating devices

■the mini-GBIC ports always operate at full duplex. (1400-24G)

■supports pass through (flooding) of spanning tree BPDUs so that

upstream devices on the network which support Spanning Tree Protocol

can detect loops that exist on the ProCurve Switch 1400 interface.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de HP

HP OfficeConnect 1850 6XGT 2XGT/SFP Manual de usuario

HP StorageWorks T5527A Manual de usuario

HP A7533A - Brocade 4Gb SAN Switch Base Manual de servicio

HP 12500 Series Manual de usuario

HP 5500 HI Series Instrucciones de uso

HP 5300 Manual de usuario

HP GbE2c - Blc Layer 2/3 Fiber SFP Option Guía del usuario

HP StorageWorks 4/32B SAN Switch Manual de usuario

HP 262586-B21 - IP Console Switch 3x1x16 KVM Manual de usuario

HP A5820X-14XG-SFP+ Manual de usuario

HP ProLiant C-GbE Manual de usuario

HP HPE OfficeConnect 1920 Series Manual de instrucciones

HP StorageWorks Director 2/64 Manual de usuario

HP 5920 Manual de usuario

HP AA-RSTZB-TE Manual de usuario

HP 8/20q Manual de instalación y funcionamiento

HP 1810-48G Manual de usuario

HP AE370A - Brocade 4Gb SAN Switch 4/12 Manual de usuario

HP 5920 Manual de usuario

HP J9827A Manual de usuario

HP ProCurve 5300xl Manual de programación

HP StorageWorks Edge Switch 2/12 Manual de usuario

HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Manual de instrucciones

HP USB-C Travel Dock Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario