HP 316095-B21 - StorageWorks Edge Switch 2/24 Manual de instrucciones

release notes

HP StorageWorks

HA-Fabric Manager

Product Version: FW 06.02.00/HAFM SW 08.02.00

Fourth Edition (September 2004)

Part Number: AA–RUR6D–TE/958–000288–008

These release notes contain late-breaking and supplemental information for the

HP StorageWorks HA-Fabric Manager (HAFM).

For the latest version of these release notes and other HAFM documentation, access the

following HP storage web site:

http://www.hp.com/country/us/eng/prodserv/storage.html

2 HP StorageWorks HA-Fabric Manager release notes

Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to,

the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for

errors contained herein or for incidental or consequential damages in connection with the furnishing, performance,

or use of this material.

This document contains proprietary information, which is protected by copyright. No part of this document may be

photocopied, reproduced, or translated into another language without the prior written consent of Hewlett-Packard.

The information contained in this document is subject to change without notice. The only warranties for HP products

and services are set forth in the express warranty statements accompanying such products and services. Nothing

herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial

errors or omissions contained herein.

Microsoft®, Windows®, Windows XP®, and Windows 2000® are U.S. registered trademarks of Microsoft

Corporation.

Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein. The

information is provided “as is” without warranty of any kind and is subject to change without notice. The warranties

for Hewlett-Packard Company products are set forth in the express limited warranty statements for such products.

Nothing herein should be construed as constituting an additional warranty.

Printed in the U.S.A.

HP StorageWorks HA-Fabric Manager release notes

Fourth Edition (September 2004)

Part Number: AA–RUR6D–TE/958–000288–008

About this document

3HP StorageWorks HA-Fabric Manager release notes

About this document

These release notes describe the contents of the HAFM software kit, and any

last-minute additions or notes on the configuration or use of HAFM software.

Be sure to read these notes before installing the HAFM. This information is

periodically updated and available on the following HP web site:

http://www.hp.com/country/us/eng/prodserv/storage.html

This section describes the content reflected in this document, including:

■Release notes information, page 3

■Intended audience, page 4

■Other HAFM documentation, page 4

■CD-ROM directory structure, page 4

■HAFM software version 08.02.00, page 6

■Important information, page 6

■Known issues, page 19

Release notes information

These release notes cover the following major topics:

■Support for speed auto-negotiate, page 19

■Losing LAN connection to the HAFM appliance when logged in to HAFM,

page 19

■Effect of no LAN connection to HAFM appliance during boot up, page 19

■Setting HAFM appliance LAN to use DHCP is activated to wrong LAN,

page 20

■Event notification by e-mail cannot be disabled for individual switches,

page 20

■Event notification by e-mail or call home can be missing information under

certain conditions, page 20

■Sort by domain ID in HAFM product list is incorrect, page 21

■Non-M-series switches in fabrics may cause errors if they are the principal

switch, page 21

■New sound files are not added to Event Manager immediately, page 21

■Show Route port numbers are not always displayed, page 22

About this document

4 HP StorageWorks HA-Fabric Manager release notes

■Wrong number of devices is displayed in the Create View dialog box, page 22

■Reporting function in Event Management may not be accurate, page 22

■HP-UX parameters may need to be changed before you run the HAFM client,

page 22

■Client HAFM Login dialog box is not displayed after logging out, page 22

■HAFM appliance may shut down following a firmware download, page 23

■Ethernet port on HAFM appliance may encounter problems, page 23

■Port labels in the performance graph are limited, page 23

■Exporting an XML topology is not successful for all views, page 23

Intended audience

This document is intended for customers who purchased HAFM. HAFM 08.02.00

applies to the 1U rack-mount appliance only and cannot be installed on the

notebook server.

Other HAFM documentation

In addition to these release notes, HP provides the following corresponding

information:

■HP StorageWorks HA-Fabric Manager Appliance Installation Guide,

AA-RU5FB-TE/958-000324-001

■HP StorageWorks HA-Fabric Manager User Guide, AA-RS2CE-TE

■HP StorageWorks HA-Fabric Manager Transition Guide,

AA-RV1MA-TE/958-000384-000

■HP StorageWorks Director and Edge Switch Glossary, AA-RU5JB-TE

■HP StorageWorks C-FCSWAPI SDK Bridge Agent Installation Instructions,

AA-RVJ1A-TE/958-000405-000

CD-ROM directory structure

The HAFM software kit includes; one CD, the HP StorageWorks ha-fabric

manager documentation and software CD (part number 516-000024-820, Rev B),

which contains the files necessary to install HAFM. The HP StorageWorks

ha-fabric manager documentation and software CD also contains the following

items at the root level directory:

About this document

5HP StorageWorks HA-Fabric Manager release notes

■Open_Bridge_Agent_Installer—Directory for installer

—version.txt—File used for installer

—copyright.txt—File used for installer

—BridgeAgentInstall.exe—File used for installer

■HAFM82_win—Directory for init file

—Setup.ini—File used for HAFM installation

■Autorun.inf—Autorun info file for HAFM installation

■data1.cab—File used for HAFM installation

■data1.hdr—File used for HAFM installation

■data2.cab—File used for HAFM installation

■HAFM.ico—File used for HAFM installation

■ikernel.ex_—File used for HAFM installation

■layout.bin—File used for HAFM installation

■setup.bmp—File used for HAFM installation

■setup.exe—Install file for HAFM applications

■setup.inx—File used for HAFM installation

■Uninstall.ico—File used for HAFM installation

■version.txt—Contains the version number of the HAFM Applications

■copyright.txt—Contains the copyright information

■Documents

—README.TXT—HP document structure; late-breaking doc changes

— AA-RU5FB-TE/958-000324-001—HP StorageWorks HA-Fabric

Manager Appliance Installation Guide

— AA-RS2CE-TE—HP StorageWorks HA-Fabric Manager User Guide

— AA-RV1MA-TE/958-000384-000—HP StorageWorks HA-Fabric

Manager Transition Guide

— AA-RU5JB-TE—HP StorageWorks Director and Edge Switch Glossary

— AA-RVJ1A-TE/958-000405-000—HP StorageWorks C-FCSWAPI SDK

Bridge Agent Installation Instructions

About this document

6 HP StorageWorks HA-Fabric Manager release notes

HAFM software version 08.02.00

The HAFM appliance has the latest version of the HAFM software pre-installed.

It is also contained on the HP StorageWorks ha-fabric manager documentation

and software CD (Part Number 516-000024-820, Rev B). HAFM 08.02.00 applies

to the 1U rack-mount appliance only and cannot be installed on the notebook

server.

All remote clients running down-level versions of HAFM are required to re-install

the client application. You must exit HAFM before installing the latest version of

HAFM. When logging in to the HAFM appliance via the remote client, an error

message is displayed stating that the new version must be installed. Follow the

instructions to install the new version of the remote client.

Important information

This section describes important information related to the HAFM software, the

Edge Switch 2/24, Edge Switch 2/32, Director 2/64, and Director 2/140.

Upgrading from previous HAFM versions requires a special process

If you have an HAFM notebook server or an HAFM appliance and you are

upgrading to HAFM 08.02.00, you must follow the directions as detailed in the

HP StorageWorks HA-Fabric Manager Transition Guide, to successfully transfer

your SAN configuration information to HAFM 08.02.00.

HAFM 08.02.00 improvements

The HP StorageWorks HA-Fabric Manager Transition Guide, shipped with the

product, explains upgrading HAFM from an earlier version.

Improved user interface

The user interface was redesigned to provide a number of improvements.

Role-based access control

Role-based access control gives you more control over user accounts and

permissions. You can define various user access levels with rights to perform

specific actions and select certain views.

About this document

7HP StorageWorks HA-Fabric Manager release notes

Zoning functionality improved

Various functionality has been added to the zoning feature, including:

■Zone replacement

■Zone set comparisons

■Zone set export and import

New zoning importing features require special procedures. Refer to the online

help or user guide for instructions.

Preferred Path support

This feature is a new feature available through the Element Managers. You can

define a Preferred Path by selecting the preferred interswitch link (ISL) to use

between an ingress switch port and a remote switch. This feature provides

management control over routes taken across the fabric to better accommodate

network traffic engineering.

Performance Monitor

Use the Performance Monitor feature to measure and graphically display

performance statistics, historic metrics, and future trends of every switch port on

your SAN. Identify over-utilized and under-utilized ports, as well as trends and

problem areas so they can be addressed quickly.

Note: This is an optional feature. Please contact your sales representative to purchase.

Event Management module

Use the Event Management feature to define and monitor specific conditions or

events and then trigger actions, such as report generation or pager alerts, when

conditions occur. This feature enables you to automate routine tasks to reduce the

amount of hands-on SAN management necessary.

Note: This is an optional feature. Please contact your sales representative to purchase.

About this document

8 HP StorageWorks HA-Fabric Manager release notes

SAN Planning module

Use the Planning feature to plan a new SAN and then evaluate that SAN using

best-practice configuration rules. This ensures the design of a scalable,

cost-effective storage network that is best suited to your needs. You can save

considerable time and money by planning your SAN before implementing it.

Note: This is an optional feature. Please contact your sales representative to purchase.

HAFM and firmware compatibility

Table 1 lists the minimum version of HAFM that can run with the various versions

of firmware for the directors and edge switches. HAFM 08.02.00 allows

managing of directors and edge switches running any of the versions of firmware

listed in Table 1.

Table 1: HAFM and firmware compatibility

Firmware version HAFM version (minimum)

01.01.02 04.00.01 (HP EFCM)

01.02.02-06 04.01.02-14 (SDCM)

01.03.00-35 04.02.00-40 (HP EFCM)

01.04.00-01 04.02.00-40 (SDCM)

02.00.00-33 06.00.00-45 (HP EFCM)

02.00.02-01 06.00.02-06

04.01.02-04 06.03.01-05

05.02.00-13 07.01.00-09 (Notebook Server)

05.02.00-13 07.02.00-09 (HAFM Appliance)

05.05.00-12 None (Edge Switch 2/12)

06.01.00-18 07.01.00-09 (Notebook Server)

06.01.00-18 07.02.00-09 (HAFM Appliance)

06.01.00-18 08.02.00 recommended (HAFM

Appliance)

About this document

9HP StorageWorks HA-Fabric Manager release notes

Prerequisites for installing and using firmware 06.02.00

If you are using HAFM, firmware 06.02.00 requires HAFM 07.01.00 or later

(check with HP Customer Support for the latest shipping version of HAFM).

HAFM should be at the minimum level before installing the new firmware.

Note: HAFM is not required for operating hardware products using the firmware.

All directors and edge switches in the same fabric should have the same firmware

level installed. Although products may co-exist in a fabric running different levels

of firmware, all products must be at the same major functional release level.

Upgrading from an earlier version of firmware

Upgrading to firmware 06.02.00-22 is non-disruptive to attached devices. The

director or edge switch is not required to be offline before performing an upgrade

operation. Limitations to upgrades are clearly identified if there are any

limitations to performing the operation.

Before upgrading firmware, it is highly recommended that you back up the

director or edge switch configuration. Refer to your HP StorageWorks Director or

Edge Switch Element Manager User Guide for more information. Embedded Web

Server (EWS) also provides an option to print or save product configuration to a

file. Refer to the HP StorageWorks Embedded Web Server User Guide for more

information.

All products must be running firmware 05.00.00 or later before upgrading to

06.02.00-22. If a switch is operating with a firmware level earlier than 05.00.00,

you must upgrade to 05.xx.xx before installing 06.02.00-22.

Upgrades and downgrades are supported only from one major release to the next,

such as from 05.xx.xx to 06.02.00-22. If EWS is used for upgrades and

downgrades, and this rule is not followed, errors occur and there may be a

disruption to attached devices.

06.02.00-22 07.01.00-09 (Notebook Server)

06.02.00-22 07.02.00-09 (HAFM Appliance)

06.02.00-22 08.02.00 recommended (HAFM

Appliance)

Table 1: HAFM and firmware compatibility (Continued)

Firmware version HAFM version (minimum)

About this document

10 HP StorageWorks HA-Fabric Manager release notes

If upgrading to firmware 06.02.00-22 requires you to upgrade from 04.xx.xx to

05.xx.xx in the process, there are special considerations. If you are upgrading a

director, see “Upgrading firmware on a director from 04.xx.xx to 05.xx.xx” on

page 10. If you are upgrading an edge switch, see “Upgrading firmware on an

edge switch from 04.xx.xx to 05.xx.xx” on page 11.

A small number of early-shipped Surestore Director FC-64 units may receive one

of the following messages when they upgrade to firmware 05.02.00-13:

■HAFM—Firmware cannot be loaded due to insufficient

CTP memory.

■EWS—File System Error: Insufficient memory for new

firmware version.

This occurs only in certain units with CTP cards. Units with CTP2 cards do not

have this issue.

If you get one of these messages during the upgrade, the firmware upgrade failed,

but the unit continues working with the existing firmware without an interruption

in service. The upgrade process checks for sufficient memory before activating the

new firmware image. The firmware upgrade does not complete without sufficient

memory. Please contact HP Customer Support if you receive this message.

Upgrading firmware on a director from 04.xx.xx to 05.xx.xx

An issue has been identified in release 04.xx.xx if the contents of the nonvolatile

storage (NVRAM) on the active CTP become corrupted. Once the configuration

has been loaded, this corruption is not detected until an IPL/IML, power cycle, or

firmware code load. If the NVRAM in the active CTP has corrupted contents, the

firmware load can cause the configuration to reset to factory defaults, which could

cause a system outage. By using the following procedure to upgrade firmware,

configuration can be preserved and a system outage can be avoided. This issue

was corrected with firmware 05.02.00-13 and later.

Note: Step 4 of the following procedure is not required if you are upgrading from

05.xx.xx or later.

To safely upgrade firmware on a director, perform the following:

1. Upgrade HAFM software on the HAFM server/appliance to 07.01.00

(minimum).

Otros manuales para 316095-B21 - StorageWorks Edge Switch 2/24

Tabla de contenidos

Otros manuales de Cambiar de HP

HP FlexFabric 5700 series Manual de usuario

HP 6125XLG Manual de usuario

HP ProCurve 3500-24 Manual del propietario

HP 5130 EI Switch Series Manual de usuario

HP AP775A - Nexus Converged Network Switch 5010 Manual de programación

HP 2530-24 Manual de usuario

HP A5820X Series Manual de usuario

HP 3600 v2 Series Manual de instalación

HP 5920 Manual de usuario

HP 6125XLG Manual de usuario

HP V1910 Manual de usuario

HP A7340A - Surestore FC 1Gb/2Gb Switch 16B Manual de usuario

HP AK241A - StorageWorks 8Gb Simple SAN... Manual de instalación y funcionamiento

HP ARUBA 2930M 40G 8 SMRT RTE POE+ 1S Instrucciones de montaje

HP ProCurve 4204vl Manual de usuario

HP FlexFabric 5980 48SFP+6QSFP28 Manual de usuario

HP 316095-B21 - StorageWorks Edge Switch 2/24 Manual de usuario

HP OfficeConnect 1405 Series Manual de usuario

HP 5830AF-96G Series Instrucciones de instalación

HP Procurve GL Manual de usuario

HP ProCurve Series 3400cl Cómo utilizar

HP 6125G Manual de instalación

HP A5500 SI Switch Series Manual de usuario

HP 12500 Series Manual de instalación

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario