HP 744 Manual de usuario
Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | sales@artisantg.com | www.artisantg.com
SM
View
Instra
Model 744 Owner’s Guide
This guide contains installation instructions.
HP Part No. A4511-90606
Edition E1199
Printed in U.S.A.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Hewlett-Packard Co. 1996, 1997, 1999
Printing History
First Printing: September 1996
Latest Printing: November 1999
UNIX is a registered trademark of The Open Group.
NOTICE
The information contained in this document is subject to change without
notice.
HEWLETT-PACKARD MAKES NO WARRANTY OF ANY KIND WITH
REGARD TO THIS MATERIAL INCLUDING BUT NOT LIMITED TO
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FIT-
NESS FOR A PARTICULAR PURPOSE. Hewlett-Packard shall not be lia-
ble for errors contained herein or for incidental or consequential damages in
connection with the furnishing, performance or use of this material.
Hewlett-Packard assumes no responsibility for the use or reliability of its
software on equipment that is not furnished by Hewlett-Packard.
This document contains proprietary information that is protected by copy-
right. All rights reserved. No part of this document may be photocopied,
reproduced or translated to another language without the prior written con-
sent of Hewlett-Packard Company.
RESTRICTED RIGHTS LEGEND. Use, duplication, or disclosure by gov-
ernment is subject to restrictions as set forth in subdivision (c) (1) (ii) of the
Rights in Technical Data and Computer Software Clause at DFARS
252.227.7013. Hewlett-Packard Co., 3000 Hanover St., Palo Alto, CA
94304.
10 9 8 7 6 5 4 3 2 1
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Contents
i
Safety Preface-2
Regulatory Statements Preface-2
Emissions Regulations Preface-2
Korean Regulations on EMI, 1991V3 Preface-3
VCCI Class A ITE Preface-3
1 Model 744 Board Computer Overview
Installation Notes 1-6
Accessory Cards 1-7
Typical External Devices 1-7
Conversion and Standard Cables 1-8
Keyboard and Mouse 1-8
HP-UX 1-12
HP VUE 1-12
HP CDE 1-12
2 Installing Accessories
Tools Required for Installation 2-3
Preliminary Procedures 2-3
Preliminary Requirements 2-5
RAM Card Installation 2-5
RAM Card Removal 2-7
Preliminary Requirements 2-8
GSC Expansion Kit Installation 2-8
Installing GSC Mezzanine Cards 2-11
Preliminary Requirements 2-11
GSC Mezzanine Card Installation 2-11
Preliminary Requirements 2-13
PMC Bridge Adapter and Expansion Adapter Installation 2-13
3 Typical Installation in a VME Card Cage
Tools Required 3-8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
ii
Contents
Preliminary Requirements 3-8
Installing a Single-Slot Model 744 into an HP Card Cage 3-8
Installing a Dual-Slot Model 744 3-9
Tools Required 3-12
Preliminary Requirements 3-12
Removing a Model 744 3-12
4Cables
Configuration Requirements 4-4
Monitors 4-4
Multi-Display Systems 4-5
Connecting the Monitor 4-5
Power Cord 4-6
Connecting a Terminal 4-6
Preparing for HP-UX Installation 4-15
Configuring HP-UX for a Printer 4-15
Printer Interface 4-15
Printer Cables 4-16
Installation Procedure 4-16
Testing the Printer Installation 4-18
HP Parallel 4-18
RS-232 Port A 4-20
5 Powering On and Off
Using SAM to Stop the HP-UX System 5-6
Using the Command Line 5-6
6 Solving Problems
A The Boot Console Interface
Main Menu A-3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Contents
iii
Configuration Menu A-4
Information Menu A-5
Service Menu A-5
VME Menu A-6
The Monitor Command A-16
Displaying the Current Monitor Configuration A-17
Setting the Monitor Type A-18
Setting the Monitor Type at Power On A-20
Using the Emergency Interactive Console Search A-21
Memory Information Example A-23
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
iv
Contents
Figures Model 744 Board Computer (Top View) 1-10
Installing RAM Cards 2-7
Installing the GSC Expansion Kit (Exploded View with GSC Card) 2-9
Adding the Front Panel Screws 2-10
Installing a GSC Mezzanine Card (Exploded View with Adapter) 2-12
Installing a PMC Card onto the PMC Bridge Adapter 2-14
Installing the PMC Bridge Adapter onto the Board Computer 2-15
Installing a PMC Card onto the Expansion Adapter 2-16
Removing Bridge Adapter Screws and EMI Gasket 2-17
Installing the Expansion Adapter onto the Bridge Adapter 2-18
Removing Ejector Handle Labels 2-19
Installing Ejector Handle Sleeves 2-20
Installing the Springs and Labels 2-21
Installing the Board Computer with PMC into VME Card Cage 2-22
Model 744 Memory Slots 3-5
Board Computer Captive Screws 3-9
Board Computer Captive Screws 3-13
Model 744 Front Panel Connectors 4-3
Connecting a Monitor 4-6
Connecting a Terminal to the RS-232 Ports 4-7
Audio Connector 4-10
Video Connector 4-11
PS/2 Connector 4-12
AUI LAN Connector 4-13
HP Parallel Connector 4-19
RS-232 Serial Connector 4-20
SCSI Connector 4-21
Model 744 LED Location 6-3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Contents
v
Tables Environmental Requirements 1-9
Determining the VME Card Cage Configuration 3-3
Model 744/132L Memory Card Current Usage Worksheet 3-5
Model 744/165L Memory Card Current Usage Worksheet 3-5
Model 744 Current Requirements Worksheet 3-6
Monitor Conversion Cables Required 4-5
Audio Specifications 4-9
Audio Connector Pinouts 4-10
Video Connector Pins and Signals 4-11
PS/2 Connector Pinouts 4-12
AUI LAN Connector Pinouts 4-14
HP Parallel Connector Pinouts 4-19
RS-232-C Connector Pinouts 4-20
SCSI Connector Pinouts 4-22
LED Indicators 6-4
System Paths A-13
Mnemonic Style Notation A-14
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
vi
Contents
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Preface-1
Preface
This owner’s guide describes how to install and use the HP Model 744
Board Computer.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Otros manuales para 744
2
Tabla de contenidos
Manuales populares de Computadora de placa única de otras marcas
WIN Enterprises
WIN Enterprises PL-80910 Manual de usuario
AXIOMTEK
AXIOMTEK SBC81206 Series Manual de usuario
Embest
Embest SOM-PH8800 Manual de usuario
SeaLevel
SeaLevel SBC-R9 Manual de usuario
SMART Embedded Computing
SMART Embedded Computing ATCA-8310 Manual de usuario
WinSystems
WinSystems PPM-LX800-G Manual de usuario
GIGAIPC
GIGAIPC QBiX-PPC Series Manual de usuario
OLIMEX
OLIMEX A10S-OLinuXino-MICRO Manual de usuario
Commell
Commell FS-978 Manual de usuario
GIGAIPC
GIGAIPC QBiP-8665A/ Manual de usuario
VersaLogic
VersaLogic Python EBX-11 Manual de usuario
Micro Computer Specialists
Micro Computer Specialists IRV-3702 Manual de usuario
