HP ProLiant BL495c Generation 6 (G6) Manual de usuario

Processor Option

Installation Instructions

for HP ProLiant BL495c Generation 5 Server Blades

Overview

This document provides instructions for installing a processor and

a heatsink.

Kit contents

•Processor with installation tool

•Heatsink

•This document

Installing a processor

WARNING: To reduce the risk of personal injury from hot

surfaces, allow the drives and the internal system

components to cool before touching them.

CAUTION: To avoid damage to the system board:

•Do not touch the processor socket contacts.

•Always install the processor socket cover after

removing the processor from the socket.

•Do not tilt or slide the processor when lowering the

processor into the socket.

CAUTION: To avoid damage to the processor:

•Handle the processor only by the edges.

•Do not touch the bottom of the processor, especially

the contact area.

CAUTION: To prevent possible server malfunction and

damage to the equipment, multiprocessor configurations

must contain processors with the same part number.

CAUTION: The heatsink thermal interface media is not

reusable and must be replaced if the heatsink is removed

from the processor after it has been installed.

IMPORTANT: Processor socket 1 must be populated at all

times or the server blade does not function.

To install a processor:

1. Update the system ROM.

Locate and download the latest ROM version from the HP

website

(http://h18023.www1.hp.com/support/files/server/us/romfl

ash.html). Follow the instructions on the website to update the

system ROM.

2. Power down the server blade.

3. Remove the server blade.

4. Remove the access panel.

The information contained herein is subject to change without notice. The

only warranties for HP products and services are set forth in the express

warranty statements accompanying such products and services. Nothing

herein should be construed as constituting an additional warranty. HP shall

not be liable for technical or editorial errors or omissions contained herein.

Part Number 484106-001

uly 2008 (First Edition)

5. Remove the heatsink blank. Retain the heatsink blank for

future use.

CAUTION: The pins on the processor socket are very

fragile. Any damage to them may require replacing the

system board.

6. Remove the processor socket protective cover. Retain the cover

for future use.

CAUTION: Failure to completely open the processor

retaining latch prevents the processor from seating during

installation, leading to hardware damage.

7. Open the processor retaining latch and the processor socket

retaining bracket.

IMPORTANT: Be sure the processor remains inside the

processor installation tool.

8. If the processor has separated from the installation tool,

carefully re-insert the processor in the tool.

9. Align the processor installation tool with the socket and install

the processor.

CAUTION: The processor is designed to fit one way into

the socket. Use the alignment guides on the processor and

socket to properly align the processor with the socket.

10. Press down firmly until the processor installation tool clicks and

separates from the processor, and then remove the processor

installation tool.

11. Close the processor retaining bracket and the processor

retaining latch.

12. Remove the thermal interface protective cover from

the heatsink.

CAUTION: To avoid damage to the system board,

processor socket, and screws, do not overtighten the

heatsink screws. Use the wrench supplied with the system

to reduce the possibility of overtightening the screws.

13. Install the heatsink. Insert both screws, and then alternate

tightening until the heatsink is seated properly.

14. Install the access panel.

15. Install the server blade.

The installation is complete.

Otros manuales para ProLiant BL495c Generation 6 (G6)

Tabla de contenidos

Otros manuales de Servidor de HP

HP AlphaServer ES47 Manual de lista de piezas

HP 108164-003 - ProLiant - 800 Manual de usuario

HP DL385 - ProLiant - G5 Instrucciones de uso

HP Tc2120 - Server - 256 MB RAM Manual de instrucciones

HP DesignJet T730 Manual de operación y mantenimiento

HP D7171A - NetServer - LPr Manual de usuario

HP ProLiant DL320e Gen8 v2 Instrucciones de instalación

HP Rx2620-2 - Integrity - 0 MB RAM Manual

HP t5710 - Thin Client Manual de usuario

HP BL685c - ProLiant - 4 GB RAM Manual técnico

HP PROLIANT ML330 G6 Manual de usuario

HP D7171A - NetServer - LPr Manual de usuario

HP 195294-001 - ProLiant - ML370R Instrucciones de funcionamiento y seguridad

HP Apollo 4200 Gen9 Manual

HP mt245 Manual

HP ProLiant DL140 - G2 Server Manual de referencia

HP ProLiant DL585 Generation 7 (G7) Instrucciones de uso

HP ProLiant DL38 Instrucciones de funcionamiento y seguridad

HP Integrity rx2600 Manual de usuario

HP ProLiant MicroServer Manual de usuario

HP DL760 - ProLiant - G2 Instrucciones de uso

HP ProLiant BL660c Gen9 Manual de usuario

HP D5970A - NetServer - LCII Manual de usuario

HP PA-8600 Manual de usuario

Manuales populares de Servidor de otras marcas

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

Milestone

Milestone Husky IVO 350T Manual de usuario

Planet

Planet NAS-7410 Manual de usuario

Lenovo

Lenovo ThinkSystem SR635 V3 Manual de usuario

Dell

Dell PowerEdge HS5610 Manual