HP A6604 Manual de usuario

HP A6604 and A6608 Router

Installation Manual

About This Manual

Organization

HP A6604/A6608 Routers Installation Manual is organized as follows:

Chapter Contents

1 Router Overview Briefly introduces the product specifications, as well as

the features and applications of the HP A6604/A6608.

2 Preparing for Installation

Describes the requirements on installation site, the

safety recommendations before and during installation,

and the required tools.

3 Installing the Router

Introduces how to install the A6604/A6608, as well as

how to connect the power cable, console cable, AUX

port cable, Ethernet cable, interface card and interface

module cable.

4 Starting and Configuring the Router

Helps you get familiar with the basic knowledge of how

to boot and configure the HP A6604/A6608, including

device startup, power-on, and initialization of system

files, and so on.

5 Maintaining Software

Introduces how to maintain the software of the HP

A6604/A6608, including upgrading the software and

updating the configuration files.

6 Maintaining Hardware Introduces how to maintain the hardware of the HP

A6604/A6608.

7 Troubleshooting

Describes some problems that may occur during

installation and startup of the router and how to solve

them.

Conventions

The manual uses the following conventions:

Command conventions

Convention Description

Boldface The keywords of a command line are in Boldface.

italic Command arguments are in italic.

[ ] Items (keywords or arguments) in square brackets [ ] are optional.

{ x | y | ... } Alternative items are grouped in braces and separated by vertical bars. One is

selected.

[ x | y | ... ] Optional alternative items are grouped in square brackets and separated by

vertical bars. One or none is selected.

Convention Description

{ x | y | ... } * Alternative items are grouped in braces and separated by vertical bars. A

minimum of one or a maximum of all can be selected.

[ x | y | ... ] * Optional alternative items are grouped in square brackets and separated by

vertical bars. Many or none can be selected.

&<1-n> The argument(s) before the ampersand (&) sign can be entered 1 to n times.

# A line starting with the # sign is comments.

GUI conventions

Convention Description

Boldface Window names, button names, field names, and menu items are in Boldface.

For example, the New User window appears; click OK.

>Multi-level menus are separated by angle brackets. For example, File >

Create >Folder.

Convention Description

< > Button names are inside angle brackets. For example, click <OK>.

[ ] Window names, menu items, data table and field names are inside square

brackets. For example, pop up the [New User] window.

/Multi-level menus are separated by forward slashes. For example,

[File/Create/Folder].

Symbols

Convention Description

Means reader be extremely careful. Improper operation may cause bodily

injury.

Means reader be careful. Improper operation may cause data loss or damage

to equipment.

Means an action or information that needs special attention to ensure

successful configuration or good performance.

Means a complementary description.

Means techniques helpful for you to make configuration with ease.

Related Documentation

In addition to this manual, each HP A6600 Routers documentation set includes the following:

Manual Description

HP A6600 Routers User Manual It is a guide for the user to perform the operations

correctly. It is organized into the parts of access, IP

services, IP routing, MPLS, VPN, QoS, security,

Manual Description

system, multicast, and OAA.

It also gives the user a detailed description of the

operating commands. It is organized into the parts of

access, IP services, IP routing, MPLS, VPN, QoS,

security, system, multicast, and OAA, as well as a

command index.

HP A6600 Routers Interface Card and Interface

Module Manual

This manual introduces all kinds of interface modules

that SR6600 routers support, the means of

connection the interface cables and the interface

module purchase guide.

Low-End and Mid-Range Series Routers Cable

Manual This manual introduces all cable pinouts available

with low-end and mid-range series routers.

Environmental Protection

This product has been designed to comply with the requirements on environmental

protection. For the proper storage, use and disposal of this product, national laws and

regulations must be observed.

1Router Overview

Introduction

The HP A6604 and A6608 routers are high-performance service routers developed by Hewlett

Packard (hereinafter referred to as HP) for enterprise networks and carrier-edge access. The

A6604 and A6608 adopt two RPE-X1s modules as the main processing units (MPUs), two

power modules, and a distributed modular architecture. Abundant optional modules are

available so that the two service routers can have a powerful processing capability and support

flexible configuration to fully meet the requirements of enterprise networks and carrier networks.

The A6604 and A6608 can work at the core layer of small- and medium-sized enterprise

networks or at the distribution layer and core layer of large-sized enterprise networks. They can

also work at the access layer of carrier networks or large enterprise networks.

With the high-performance microprocessor technology, advanced hardware architecture and HP

proprietary Comware V5 platform, the A6604 and A6608 provide high service processing

capabilities, good service scalability, and high reliability. In addition, the A6604 and A6608 can

work together with other HP network devices to provide full network solutions for carriers and

departments in electric power, finance, tax, public security, railway and education, as well as for

medium- and large-sized enterprises. The full compliance with national and international

standards ensures the interoperability with the products of other manufacturers at different

layers.

The A6604 and A6608 support high-speed interface modules (HIMs) and provide a bus

processing capability of up to 10 Gbps, which can meet the high-speed performance

requirements of users. In addition, the A6604 and A6608 are compatible with some multi-

functional interface modules (MIMs) of the HP AR/MSR series routers to guarantee the smooth

upgrade from narrowband access to broadband access, improve the competitiveness, and

protect existing investments. For easy description, the term “device” is used throughout this

document to refer to any A6604 or A6608 router if not otherwise specified.

You can configure MPUs and flexible interface platforms (FIPs) on the A6604 and A6608 as

needed. Table 1-1 describes MPUs' support for FIPs on the A6604 and A6608.

Table 1-1 MPUs' support for FIPs

MPU FIP-100 FIP-110 FIP-200 FIP-210

RPE-X1 Supported Supported Supported Supported

RSE-X1 Not supported Supported Not supported Supported

The A6604 and A6608 support two types of MPUs, route processing engine (RPE) and route

switch engine (RSE).

To facilitate description, the term "FIP" is used throughout this document to refer to the FIP-

100, FIP-110, FIP-200, and FIP-210 if not otherwise specified.

The FIP-100 and FIP-110 support MIMs only.

The FIP-200 and FIP-210 support MIMs, HIMs, and HIM/MIM intermixing.

For details about the slot arrangement, refer to Chapter 2 "Arranging Slots and Numbering

Interfaces."

For details about installation and removal of HIMs and MIMs, refer to Chapter 4 "Installing the

Router.”

Physical Description

Front View

Figure 1-1 Front view of the A6604 (configured with an RPE-X1)

(1) Left mounting bracket (2) MPU slot (Slot 1)

(3) RPE-X1 (Slot 0) (4) Right mounting bracket

(5) Chassis handle (6) Fan tray

(7) AC power module (PWR 1) (8) PoE power module (reserved PoE slot)

(9) Power module (PWR 2) (10) ESD socket and silkscreen

(11) FIP slot (Slot 3) (12) FIP-200 (Slot 2)

(13) Cable management bracket

Figure 1-2 Front view of the A6604 (configured with an RSE-X1)

(1) Left mounting bracket (2) RSE-X1 (Slot 1)

(3) Right mounting bracket (4) Chassis handle

(5) Fan tray (6) AC power module (PWR 1)

(7) PoE power module (reserved PoE slot) (8) Power module (PWR 2)

(9) ESD socket and silkscreen (10) FIP slot (Slot 3)

(11) FIP-210 (Slot 2) (RSE-X1 compatible) (12) Cable management bracket

Figure 1-3 Front view of the A6608 (configured with an RPE-X1)

(1) Left mounting bracket (2) MPU slot (Slot 1)

(3) RPE-X1 (Slot 0) (4) Right mounting bracket

(5) Chassis handle (6) Fan tray

(7) AC power module (PWR 1) (8) PoE power module (reserved)

(9) Power module (PWR 2) (10) ESD socket and silkscreen

(11) FIP slot (Slot 5) (12) FIP slot (Slot 4)

(13) FIP slot (Slot 3) (14) FIP slot (Slot 2)

(15) Cable management bracket

Figure 1-4 Front view of the A6608 (configured with an RSE-X1)

(1) Left mounting bracket (2) RPE-X1 (Slot 1)

(3) Right mounting bracket (4) Chassis handle

(5) Fan tray (6) AC power module (PWR 1)

(7) PoE power module (reserved PoE slot) (8) Power module (PWR 2)

(9) ESD socket and silkscreen (10) FIP slot (Slot 5)

(11) FIP slot (Slot 4) (12) FIP-210 (Slot 3)

(13) FIP slot (Slot 2) (RSE-X1 compatible) (14) Cable management bracket

Currently, the device does not support power over Ethernet (PoE).

Rear View

Figure 1-5 Rear view of the A6604

(1) Warning label (2) Handle on the rear chassis panel

(3) Upper slide rail for the air filter (optional) (4) Air filter (optional)

(5) Lower slide rail for the air filter (optional) (6) Chassis handle

(7) Weight-bearing warning label (50 kg or 110.23 lb)

(8) Grounding screw and sign (9) Vents

Figure 1-6 Rear view of the A6608

(1) Warning label (2) Handle on the rear chassis panel

(3) Upper slide rail for the air filter (4) Air filter (optional)

(5) Lower slide rail for the air filter (6) Chassis handle

(7) Weight-bearing warning label (50 kg or 110.23 lb)

(8) Grounding screw and sign (9) Vents

Do not hold the handle indicated by (2) in Figure 1-5 on the rear chassis panel to move the

chassis because it is designed for the convenience of the rear chassis panel removal, but not

for bearing the chassis weight.

System Specifications

Dimensions, Weight and LPU Slots

Table 1-2 Dimensions, weight and LPU slots

Item Specification

A6604 A6608

Dimensions without feet and

mounting brackets (H × W × D) 220 × 436 × 480 mm (8.66 ×

17.17 × 18.90 in.) 308 × 476 × 436 mm (12.13 ×

18.74 × 17.17 in.)

Weight (full configuration) 38 kg (83.77 lb) 50 kg (110.23 lb)

LPU slots 2 4

Power Modules

Table 1-3 Power module specifications

Item Specification

Rated voltage range AC powered: 100 VAC to 240 VAC; 50 Hz or 60 Hz

DC powered: –48 VDC to –60 VDC

Maximum input current AC powered: 10 A

DC powered: 25 A

Maximum power provided by one power module 650 W

Physical dimensions (H × W × D) 40 × 140 × 354 mm (1.57 × 5.51 ×13.94 in.)

Power module slots Two power module slots are provided. The power

modules must have the same specifications.

Power consumption range A6604: 75.9W~341.2W

A6608: 86.4W~559W

Online insertion and removal Supported

Online insertion and removal of a power module refers to first switching off the power module

and then removing it from the chassis or inserting it into the chassis. Before doing that, make

sure that the router is configured with redundant power modules and the system services are

running normally.

Figure 1-7 AC power module

(1) Captive screw (2) Bail latch

(3) Power socket (4) Power switch

(5) Power LED (6) Power module handle

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Enrutador de red de HP

HP MSR SERIES Manual de instalación

HP PS110 Manual de usuario

HP J4093A Manual de usuario

HP ProCurve Secure 7102dl Manual de usuario

HP 2100 ER Manual de usuario

HP VSR1000 Manual de usuario

HP 5920 Manual de usuario

HP MSR900-W Manual de usuario

HP MSR 93 Series Manual de usuario

HP FlexNetwork MSR3064 Manual de usuario

HP FlexNetwork MSR3012 Manual de usuario

HP FlexNetwork HSR6800 Manual de usuario

HP MSR SERIES Manual de instalación

HP FlexNetwork HSR6600 Manual de instalación

HP Pavilion 501 Manual de instrucciones

HP FlexNetwork HSR6600 Manual de usuario

HP FlexNetwork 6616 Manual de usuario

HP A5500 EI Switch Series Manual de instalación

HP A-MSR900 Series Instrucciones de montaje

HP FlexFabric 12900 series Manual de usuario

HP 6125XLG Manual de usuario

HP HP 2530 Manual de usuario

HP VSR1000 Manual de instalación

HP FlexNetwork HSR6800 Manual de instalación

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad