HP 8591C Manual de usuario

Printed in USA March 2000

Notice

Hewlett-Packard to Agilent Technologies Transition

This documentation supports a product that previously shipped under the Hewlett-

Packard company brand name. The brand name has now been changed to Agilent

Technologies. The two products are functionally identical, only our name has changed. The

document still includes references to Hewlett-Packard products, some of which have been

transitioned to Agilent Technologies.

Advanced Test Equipment Rentals

www.atecorp.com 800-404-ATEC (2832)

User’s

Guide

8591C

Cable

Analyzer

Cable

Measurements

HP part number: 08591-90176 Supersedes: 08591-90124

Printed in USA, October 1996

Notice.

The information contained in this document is subject to change without

notice.

Hewlett-Packard makes no warranty of any kind with regard to this material,

including but not limited to, the implied warranties of merchantability and

fitness for a particular purpose. Hewlett-Packard shall not be liable for errors

contained herein or for incidental or consequential damages in connection

with the furnishing, performance, or use of this material.

Regulatory Information.

The regulatory information is in the calibration guide for your analyzer.

acopyright

1996 Hewlett-Packard Company

written permission is prohibited, except as allowed under the copyright laws

1400 Fountaingrove Parkway, Santa Rosa, CA 95403-1799, USA

Hewlett-Packard

Software

Product

License

Agreement

and

Limited

Warranty

Important

Please carefully read this License Agreement before opening the media envelope or operating the

equipment. Rights in the software are offered only on the condition that the Customer agrees to

all terms and conditions of the License Agreement. Opening the media envelope or operating the

equipment indicates your acceptance of these terms and conditions. If you do not agree to the License

Agreement, you may return the unopened package for a full refund.

111

License

Agreement

In return for payment of the applicable fee, Hewlett-Packard grants the

Customer a license in the software, until terminated, subject to the following:

Use.

l Customer may use the software on one analyzer instrument

l Customer may not reverse assemble or decompile the software.

Copies and Adaptations.

l Customer may make copies or adaptations of the software:

q For archival purposes, or

q When copying or adaptation is an essential step in the use of the

software with a computer so long as the copies and adaptations are used

in no other manner.

l Customer has no other rights to copy unless they acquire an appropriate

license to reproduce which is available from Hewlett-Packard for some

software.

l Customer agrees that no warranty, free installation, or free training is

provided by Hewlett-Packard for any copies or adaptations made by

Customer.

l All copies and adaptations of the software must bear the copyright

notices(s) contained in or on the original.

Ownership.

l Customer agrees that they do not have any title or ownership of the

software, other than ownership of the physical media.

Customer acknowledges and agrees that the software is copyrighted and

protected under the copyright laws.

l Customer acknowledges and agrees that the software may have been

developed by a third party software supplier named in the copyright

notice(s) included with the software, who shall be authorized to hold the

Customer responsible for any copyright infringement or violation of this

License Agreement.

Transfer of Rights in Software.

l Customer may transfer rights in the software to a third party only as part

of the transfer of all their rights and only if Customer obtains the prior

agreement of the third party to be bound by the terms of this License

Agreement.

l Upon such a transfer, Customer agrees that their rights in the software are

terminated and that they will either destroy their copies and adaptations or

deliver them to the third party.

l Transfer to a U.S. government department or agency or to a prime or

lower tier contractor in connection with a U.S. government contract shall

be made only upon their prior written agreement to terms required by

Hewlett-Packard.

Sublicensing and Distribution.

l Customer may not sublicense the software or distribute copies or

adaptations of the software to the public in physical media or by

telecommunication without the prior written consent of Hewlett-Packard.

Termination.

l Hewlett-Packard may terminate this software license for failure to comply

with any of these terms provided Hewlett-Packard has requested Customer

to cure the failure and Customer has failed to do so within thirty (30) days

of such notice.

Updates and Upgrades.

l Customer agrees that the software does not include future updates

and upgrades which may be available for HP under a separate support

agreement.

Export.

l Customer agrees not to export or re-export the software or any copy or

adaptation in violation of the U.S. Export Administration regulations or

other applicable regulations.

Limited

Warranty

Software.

Hewlett-Packard warrants for a period of 1 year from the date of purchase

that the software product will execute its programming instructions when

properly installed on the analyzer instrument indicated on this package.

Hewlett-Packard does not warrant that the operation of the software will

be uninterrupted or error free. In the event that this software product

fails to execute its programming instructions during the warranty period,

customer’s remedy shall be to return the measurement card (“media”) to

Hewlett-Packard for replacement. Should Hewlett-Packard be unable to

replace the media within a reasonable amount of time, Customer’s alternate

remedy shall be a refund of the purchase price upon return of the product

and all copies.

Media.

Hewlett-Packard warrants the media upon which this product is recorded

to be free from defects in materials and workmanship under normal use

for a period of 1 year from the date of purchase. In the event any media

prove to be defective during the warranty period, Customer’s remedy

shall be to return the media to Hewlett-Packard for replacement. Should

Hewlett-Packard be unable to replace the media within a reasonable amount

of time, Customer’s alternate remedy shall be a refund of the purchase price

upon return of the product and all copies.

Notice of Warranty Claims.

Customer must notify Hewlett-Packard in writing of any warranty claim not

later than thirty (30) days after the expiration of the warranty period.

Limitation of Warranty.

Hewlett-Packard makes no other express warranty, whether written or oral,

with respect to this product. Any implied warranty of merchantability or

fitness is limited to the 1 year duration of this written warranty.

This warranty gives

speciEc

legal rights, and Customer may also have other

rights which vary from state to state, or province to province.

Exclusive Remedies.

The remedies provided above are Customer’s sole and exclusive remedies.

In no event shall Hewlett-Packard be liable for any direct, indirect, special,

incidental, or consequential damages (including lost profit) whether based on

warranty, contract, tort, or any other legal theory.

Warranty Service.

Warranty service may be obtained from the nearest Hewlett-Packard sales

office or other location indicated in the owner’s manual or service booklet.

vii

Safety

Symbols

The following safety symbols are used throughout this manual.

F’amiliarize

yourself with each of the symbols and its meaning before operating this

instrument.

CAUTION

The caution sign denotes a hazard. It calls attention to a procedure which,

if not correctly performed or adhered to, could result in damage to or

destruction of the instrument. Do not proceed beyond a caution sign until

the indicated conditions are fully understood and met.

WARNING

The warning sign denotes a hazard. It calls attention to a procedure

which, if not correctly performed or adhered to, could result in injury or

loss of life. Do not proceed beyond a warning sign until the indicated

conditions are fully understood and met.

Vlll

General

Safety

Considerations

WARNING

Before the analyzer is switched on, make sure it has been properly

grounded through the protective conductor of the ac power cable to a

socket outlet provided with protective earth contact.

Any interruption of the protective (grounding) conductor, inside or

outside the instrument, or disconnection of the protective earth terminal

can result in personal injury.

CAUTION

Before the analyzer is switched on, make sure its primary power circuitry has

been adapted to the voltage of the ac power source.

Failure to set the ac power input to the correct voltage could cause damage to

the instrument when the ac power cable is plugged in.

Tabla de contenidos

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario