HP df808 Series Manual de usuario
HP df808 Series
Digital Picture Frame
User Manual
1
1
English
FCC Compliance Statement
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, only use shielded interface
cables when connecting to computer or peripheral devices. Any changes
or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
2
English
3
Table of Contents
What’s in the Box..........................................................2
Getting Started..............................................................3
Installing the Foot Stand..............................................5
Powering on the Frame.................................................6
Using the Digital Photo Frame......................................7
Settings Menu..............................................................15
Cleaning and Care Tips................................................17
Getting Help.................................................................18
2
3
English
What’s in the Box
Qty Item Image
1 Digital Picture Frame
1Remote Control
Replacement Battery = CR2025
1 Universal Power Adapter (5V, 2A)
1 USB Cable
1User Manual with
Declaration of Conformity
1 Quick Start Guide
1 Warranty Document
4
English
5
Getting Started
Identifying the parts
Front view
LCD (Liquid Crystal Display) panel
Rear view
Control buttons
Hanging slot
Lock slot
4
5
English
Left view
Power socket
Power switch transfer
Mini USB port for le transfer
Right view
5-in-1 memory card slot
(SD/SDHC, MMC, MS, MS-Pro, xD)
Foot stand
CF memory card slot
6
English
7
Installing the Foot Stand
On the back of the frame, align the foot stand with the lock slot.1.
Install the foot stand onto the frame as illustrated until it clicks into2.
place.
6
7
English
Powering on the Frame
Plug the AC power adapter into the power outlet, then plug the other1.
end into the power socket of the frame.
DC 5V
Insert a memory card (to be purchased separately) to the appropriate2.
card slot.
Note: You can also view the demo images preloaded in the internal•
memory of this frame without inserting a memory card.
Supported memory card type: Secure Digital™, xD-Picture Card™,•
MultiMedia Card™, Memory Stick™, and Memory Stick PRO™.
Both 5-in-1 and CF memory card slots support hot-swap function.•
When one memory card is inserted and then a second one is•
inserted, the frame only will display les from the second one.
When two memory cards are inserted simultaneously and the•
power is turned off and then back on, the frame only will display
les from the SD card.
This frame may not read all image or video les downloaded from •
the Internet.
Turn on the frame by sliding the power switch to the ON position.3.
8
English
9
Using the Digital Photo Frame
Using the control buttons
You can operate this frame by pressing the control buttons which are located
on the back of the frame. The icons at the top of the screen correspond to the
control buttons. If there are no icons at the top of the screen, then press any
of the control buttons to display the icons.
Note: Control buttons do not always perform the same function between•
modes.
Using the remote control
This frame comes with a remote control. Below is a table of all the buttons
and a description of their functions.
Note: This guide assumes you are using the remote control to control the•
frame.
1
9
12
11
13
8
2
3
4
5
7
6
No Description
1Backlight Saving
Press this button to activate Backlight Saving function.
2Alarm
In Calendar mode, you can press this button to set up the alarm.
3Setup
Press this button to access the Setup menu.
4
Mode selection
Press this button to switch among different Photo, Calendar, Video, and
Settings modes.
5
Return
Press this button to cancel current action and/or go back to the previous
page.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Marco de fotos digital de HP
HP
HP df730v1 Manual de usuario
HP
HP DF820B2 Manual de usuario
HP
HP df820 - 8" Series Digital Picture Frame Manual de uso y mantenimiento
HP
HP MediaSmart Frame 100 Manual de usuario
HP
HP DF1000A3 Manual de usuario
HP
HP DF1050TW Manual de usuario
HP
HP KY616AA - DreamScreen 100 Wireless Connected... Manual de usuario
HP
HP DF840P1 Manual de usuario
HP
HP df1130 Series Manual de usuario
HP
HP DF1000A3 Manual de usuario
HP
HP df850 Manual de usuario
HP
HP DF820B2 Manual de usuario
HP
HP DF1000A3 Manual de usuario
HP
HP DF1000A3 Manual de usuario
HP
HP df800 Series Manual de usuario
HP
HP df1010v2 Manual de usuario
HP
HP DF1000A3 Manual de usuario
HP
HP df1010v2 Manual de usuario
HP
HP df820 - 8" Series Digital Picture Frame Manual de usuario
HP
HP DF1010P1 Manual de usuario
