HP DF1000A3 Manual de usuario

HP df300 Series

HP df300 Série

HP df300 Series

Digital Picture Frame

Cadre Photo Numérique

Marco de Fotos Digital

User Manual

Manuel de l’Utilisateur

Manual del usuario

Revision 1.0a

ENGLISH

FCC Compliance Statement

Note: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one of the

following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: To assure continued compliance, only use shielded interface cables when

connecting to computer or peripheral devices. Any changes or modifications not expressly

approved by the party responsible for compliance could void the user’s authority to operate this

equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

ENGLISH

Table of Contents

FCC Compliance Statement

What’s in the Box?

Getting Started

Initial Setup

Setup Menu

Key Features

Picture Options

Specifications

Frequently Asked Questions

Cleaning and Care Tips

Getting Help

ENGLISH

Qty Item Image

1 3.5” Digital Picture Frame

1Universal Power Adapter

(5V, 0.5A, 100/240 switching)

1 USB 2.0 Cable

1 User Manual

1 Warranty Document

IMPORTANT: Please keep this document for

technical support contact information.

1 Declaration of Conformity

1 Leather Carrying Case

What’s in the Box?

ENGLISH

1. The digital picture frame has basic control buttons on the top of the frame as illustrated

below.

2. Unfold the attached stand to its extended position. Attach the USB cable to the AC adapter.

Connect the mini connector of the cable to the digital picture frame, and plug the adapter

into a wall power outlet as illustrated below. The picture frame will automatically power

on and begin charging the internal battery. Please allow 2 to 3 hours for a full internal

battery charge.

Power

Options Left/Previous

Right/Next

Getting Started

ENGLISH

3. If the frame did not automatically power on, press and hold the button on the top of

the frame for 3 to 5 seconds. The df300 Digital Picture Frame is preloaded with pictures

that illustrate the basic features of this product and a slideshow will begin in a few seconds.

If you wish to eventually delete these pictures from the internal memory, please reference

the PICTURE OPTIONS section of this manual.

4. If you wish to immediately view your own pictures, insert a SD memory card containing

desired pictures into the card slot. In a few seconds, a slideshow of your pictures will

begin. Note: Memory card must be orientated correctly as illustrated below. Push the

memory card into the slot until it is locked into position.

5. To turn the picture frame off, press and hold the button for 3 to 5 seconds.

ENGLISH

1. Power on the picture frame and allow the picture slideshow to begin. Press the button

to view the Memory Source Screen as illustrated below.

2. Press and hold the button until the SETUP MENU is displayed as illustrated below.

3. Use the and buttons to highlight the desired setting. Press the button to select the

setting options.

Initial Setup

ENGLISH

4. Continue to use the and buttons to highlight the desired option. Press the button

to select the desired option.

5. Press the button to return to the SETUP MENU. Press the button again to exit the

SETUP MENU and return to the Memory Source Screen.

6. Use the and buttons to highlight the desired memory source. Press the button

to select the desired memory source. This will begin a slideshow with pictures from the

selected memory source.

ENGLISH

Option Description

Display Image Size

Select “ORIGINAL” to display pictures with their original properties.

Display picture in full height in normal aspect ratios. Some picture may

not fill the screen, and leave space on both sides. Select “OPTIMAL” to

allow the frame to display pictures with optimized properties. Picture(s)

will enlarge to fit the full width of the screen.

The factory default option is “ORIGINAL”.

Slideshow

Transition

Choose from 6 options and select the preferred transition. Options are:

Normal, Random, Top_Bottom, Curtain, Open_Door, and Cross_Comb.

The default option is set to “RANDOM”.

Slideshow Speed Select the desired picture display length. Options are: 5 seconds, 10

seconds, 30 seconds.

The default option is 5 seconds.

Language Choose from 7 On Screen Display languages. Options are: English,

German, French, Spanish, Portuguese, Italian, and Dutch.

The factory default is English .

Connect to PC Select this option when the frame is connected to the PC to switch to file

transfer mode. In this mode, you will be able to access the SD/SDHC/

MMC card.

Setup Menu

ENGLISH

Option Description

Power Saving

This feature will automatically turn off the LCD on the HP digital picture

frame to save valuable energy. You can choose from 4 settings. Options

are: 5 minutes, 10 minutes, 30 minutes, or No Power Saving.

If you want to turn on the LCD, press any key on the photo frame.

The factory default is set to No Power Saving.

Factory Default If you wish to restore ALL the settings to the factory default, press the

button.

Otros manuales para DF1000A3

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Marco de fotos digital de HP

HP df820 - 8" Series Digital Picture Frame Manual de usuario

HP df1130 Series Manual de instalación y operación

HP DF840P1 Manual de usuario

HP df301 Series Manual de usuario

HP DF710C2 Manual de usuario

HP DF1010P1 Manual de usuario

HP DF1000A3 Manual de usuario

HP df1010v2 Manual de usuario

HP DF1000A3 Manual de usuario

HP DF1050TW Manual de usuario

HP MediaSmart Frame 100 Manual de usuario

HP df820 - 8" Series Digital Picture Frame Manual de uso y mantenimiento

HP DF1000A3 Manual de uso y mantenimiento

HP df800 Series Manual de usuario

HP df850 Manual de usuario

HP df730v1 Manual de usuario

HP DF1000A3 Manual de usuario

HP df1010b3 Manual de usuario

HP DF1000A3 Manual de usuario

HP df730v1 Manual de usuario

HP df800 Series Manual de usuario

HP DF820B3 Manual de usuario

HP df820 - 8" Series Digital Picture Frame Manual de usuario

HP df1010v2 Manual de usuario

Manuales populares de Marco de fotos digital de otras marcas

LENCO

LENCO DF-830 Manual de usuario

NIX

NIX Advance X10G Manual de usuario

Nextar

Nextar N7S-100 Manual de usuario

Sungale

Sungale TD350A Manual de usuario

texet

texet DPF-830 Instrucciones de montaje

Philips

Philips SPF2017 Manual de usuario

Philips

Philips SPF1327 Manual de usuario

Philips

Philips SPF7010/10 Manual de usuario

Digital Spectrum

Digital Spectrum MemoryVue MV-1500 Manual de usuario

ViewSonic

ViewSonic VFM1042-52 Manual de usuario

YURAKU

YURAKU YUR.PHOTO 7B4C Manual de usuario

Denver

Denver PFF-710WHITE MK2 Manual de usuario

Pandigital

Pandigital PAN8000DWPCF1 Manual de usuario

Rekam

Rekam Deja View HD-850 Manual de usuario

Majestic

Majestic DF 918HD MP3 Manual de usuario

ViewSonic

ViewSonic DPF8-CAM Manual de usuario

Philips

Philips SPF2527 Manual de usuario

Digital Foci

Digital Foci Image Moments IMT-063 Manual de usuario