HP Elite 7000 Microtower Manual de usuario
Computer Setup (F10) Utility Guide
HP Elite 7000 MT Series PCs
© Copyright 2009 Hewlett-Packard
Development Company, L.P. The
information contained herein is subject to
change without notice.
Microsoft, Windows, and Windows Vista are
either trademarks or registered trademarks
of Microsoft Corporation in the United States
and/or other countries.
The only warranties for HP products and
services are set forth in the express warranty
statements accompanying such products
and services. Nothing herein should be
construed as constituting an additional
warranty. HP shall not be liable for technical
or editorial errors or omissions contained
herein.
This document contains proprietary
information that is protected by copyright. No
part of this document may be photocopied,
reproduced, or translated to another
language without the prior written consent of
Hewlett-Packard Company.
Computer Setup (F10) Utility Guide
HP Elite 7000 MT Series PCs
First Edition (October 2009)
Document Part Number: 578996-001
About This Book
This guide provides instructions on how to use Computer Setup. This tool is used to reconfigure and
modify computer default settings when new hardware is installed and for maintenance purposes.
WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily
harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage
to equipment or loss of information.
NOTE: Text set off in this manner provides important supplemental information.
ENWW iii
iv About This Book ENWW
Table of contents
Computer Setup (F10) Utility
Computer Setup (F10) Utilities ............................................................................................................. 1
Using Computer Setup (F10) Utilities .................................................................................. 1
Computer Setup—Main ....................................................................................................... 2
Computer Setup—Advanced ............................................................................................... 2
Computer Setup—Power ..................................................................................................... 3
Computer Setup—Boot ........................................................................................................ 4
Computer Setup—Exit ......................................................................................................... 4
Recovering the Configuration Settings ................................................................................................. 5
ENWW v
vi ENWW
Computer Setup (F10) Utility
Computer Setup (F10) Utilities
Use Computer Setup (F10) Utility to do the following:
●Change factory default settings.
●Set the system date and time.
●Set, view, change, or verify the system configuration, including settings for graphics, audio, storage,
communications, and input devices.
●View settings for processor and memory.
●Modify the boot order of bootable devices such as hard drives, optical drives, or USB flash media
devices.
●Run hard drive self-tests.
●Establish a supervisor password that controls access to Computer Setup (F10) Utility and the
settings described in this section.
Using Computer Setup (F10) Utilities
Computer Setup can be accessed only by turning the computer on or restarting the system. To access
the Computer Setup Utilities menu, complete the following steps:
1. Turn on or restart the computer.
2. As soon as the computer is turned on, press F10 before the computer boots to the operating system
to enter Computer Setup.
NOTE: If you do not press F10 at the appropriate time, you must restart the computer and again
press F10 when the monitor light turns green to access the utility.
3. The Computer Setup Utility screen is divided into menu headings and actions.
Five menu headings appear on the Computer Setup Utility screen:
●Main
●Advanced
●Power
●Boot
●Exit
Use the arrow keys to select the appropriate heading, then press Enter. Use the arrow (up and
down) keys to select the option you want, then press Enter. To return to the previous screen, press
Esc.
ENWW Computer Setup (F10) Utilities 1
CAUTION: Do NOT turn the computer power OFF while the ROM is saving the Computer Setup (F10)
changes because the CMOS could become corrupted. It is safe to turn off the computer only after exiting
the F10 Setup screen.
Computer Setup—Main
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 1 Computer Setup—Main
Option Description
System Time Allows you to set system time.
System Date Allows you to set system date.
Language Allows you to select language.
1st Drive
2nd Drive
3rd Drive
4th Drive
For each, allows you to:
●(view only)
◦Capacity (Size - HDD only)
●Smart Support - run HDD self-test for selected channel:
◦SMART Status Check
◦SMART Short Self-Test
◦SMART Extended Self-Test
System Information (view only)
●Installed Memory
●Memory Bank 1
●Memory Bank 2
●Memory Bank 3
●Memory Bank 4
●BIOS Revision
●Core Version
Computer Setup—Advanced
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
WARNING! Setting items on this menu to incorrect values may cause your system to malfunction.
Table 2 Computer Setup—Advanced
Option Description
CPU Type (view only)
CPU Speed (view only)
Cache RAM (L2) (view only)
Cache RAM (L3) (view only)
2 Computer Setup (F10) Utility ENWW
Primary Video Adapter Allows you to select the boot display device when more than 2 video options are offered by the
system:
●Integrated (Onboard)
●PCI-E
SATA Controller Mode If SATA Controller is enabled, allows you to set the mode to:
●IDE
●AHCI
●RAID
SATA Controller Allows you to disable/enable the SATA Controller.
Onboard LAN Allows you to disable/enable onboard LAN controller.
Onboard LAN Boot
ROM
Allows you to disable/enable the boot ROM of the onboard LAN chip.
Onboard WLAN Allows you to disable/enable onboard WLAN controller.
Onboard 1394 Allows you to enable/disable all 1394 ports.
Supervisor Password Allows you to establish, disable, or change the supervisor password.
User Password Allows you to establish, disable, or change the user password.
NOTE: Only displays if a Supervisor password is set.
Onboard Audio Allows you to set the onboard audio to:
●Auto
●Disabled
●Enabled
ESC:Boot Menu Allows you to enable/disable the option to press the Esc key to access the Boot menu during
computer startup.
F9:Diagnostics Allows you to enable/disable the option to press the F9 key to access the Diagnostics menu during
computer startup.
F10:Setup Allows you to enable/disable the option to press the F10 key to access the Setup menu during
computer startup.
F11:Recovery Allows you to enable/disable the option to press the F11 key to access the Recovery menu during
computer startup.
F12:Boot from LAN Allows you to enable/disable the option to press the F12 key to access the Boot from LAN option
during computer startup.
Computer Setup—Power
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 3 Computer Setup—Power
Option Description
After AC Power Failure Allows you to select system restart behavior after power loss:
●Stay Off
●Power On
●Auto
Table 2 Computer Setup—Advanced (continued)
ENWW Computer Setup (F10) Utilities 3
Hyper-Threading Allows you to enable/disable hyperthreading.
XD (Execute Disable) Disables/enables XD bit.
Virtualization
Technology
Allows you to enable/disable Virtualization Technology.
Computer Setup—Boot
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 4 Computer Setup—Boot
Option Description
Boot-time Diagnostic
Screen
Disables/enables POST diagnostic messages display.
Boot Device Priority
1st Boot Device
2nd Boot Device
3rd Boot Device
4th Boot Device
Allows you to specify which device groups will boot first, second, third, and fourth or to disable any
of the four:
●Floppy Group
●CD-ROM Group
●Hard Drive Group
●Network Boot Group
NOTE: MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating system
has started.
Floppy Group Boot
Priority
Specifies boot device priority within removable devices.
NOTE: This computer does not support floppy drives.
CD-ROM Group Boot
Priority
Specifies boot device priority within CD/DVD drives.
Hard Drive Group Boot
Priority
Specifies boot device priority within hard drives.
Network Group Boot
Priority
Specifies boot device priority within bootable network devices.
Computer Setup—Exit
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 5 Computer Setup—Exit
Option Description
Exit Saving Changes Press Enter to exit saving changes.
Exit Discarding
Changes
Press Enter to exit discarding changes.
Load Setup Defaults Press Enter to load setup defaults.
Discard Changes Press Enter to discard changes.
Save Changes Press Enter to save changes.
Table 3 Computer Setup—Power (continued)
4 Computer Setup (F10) Utility ENWW
Otros manuales para Elite 7000 Microtower
5
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de De oficina de HP
HP
HP Pavilion Elite e9230f Manual de usuario
HP
HP Desktop Pro A G2 Manual
HP
HP dc7900 - Convertible Minitower PC Guía de configuración
HP
HP Pavilion a400 - Desktop PC Manual de usuario
HP
HP Compaq dx2708 Microtower Manual de usuario
HP
HP Pavilion t3725.uk Manual de usuario
HP
HP Vectra XE320 Manual de instalación y operación
HP
HP Pavilion E h8-1200 Manual de uso y mantenimiento
HP
HP Pavilion t100 - Desktop PC Manual de uso y mantenimiento
HP
HP Pavilion v300 - Desktop PC Manual de usuario
HP
HP Compaq Presario Manual de usuario
HP
HP Pro 3330 Manual
HP
HP Z420 Series Manual de usuario
HP
HP TouchSmart 420-1000 Manual de usuario
HP
HP M9340f - pavilion - elite Manual de usuario
HP
HP Compaq Presario Manual de usuario
HP
HP Vectra VL5 5 Instrucciones de instalación y mantenimiento
HP
HP Pavilion Elite m9040n Hoja de especificaciones
HP
HP Deskpro EC Manual de usuario
HP
HP Xw4400 - Workstation - 2 GB RAM Guía de referencia
