Hoymiles MI-1000N Manual de usuario

Quick Installation Guide

MI-1000N/MI-1200N/MI-1500N AP040263 REV1.1 1 / 2

1. Accessories

Item

Description

AC End Cable (Female), 2m 12AWG Cable

M8*25 screws

DC Extension Cable, 1m

AC Female End Cap, IP67

*Note: All accessories above are not included in the package, and need to be purchased

separately. Please contact our sales representative for the price. (M8 screws need to be

prepared by installer-self.)

2. Installation Steps

Please make sure the microinverter is installed under the required environment.

(Please refer to product user manual for more details.)

Step 1. Fix Microinverter on the Rail

A) Mark the approximate center of each panel on the frame.

B) Fix the screw on the rail.

C) Hang the microinverter on the screw (shown as picture below), and tighten the screw.

The silver cover side of the microinverter should be facing the panel.

*Note: Please install the microinverter at least 50cm above the ground/roof for better

communication with Hoymiles DTU.

Step 2. Connect AC Cables of Microinverter

A) Plug the AC connector of the first microinverter with the connector of the second

microinverter, to form a continuous AC branch circuit.

*Note: The length of AC cable on microinverter is around 2.06m. If the distance between two

microinverters is more than 2.04m, please use the AC extension cable between two inverters

(As picture indicated below).

B) Install the AC end cap on the open AC connector of the last microinverter in the AC

branch circuit.

Step 3. Connect AC End Cable

A) Make the AC end cable.

1. Take the AC port apart into 3 parts:

Quick Installation Guide

MI-1000N/MI-1200N/MI-1500N AP040263 REV1.1 2 / 2

2. Insert the AC cable from Part 3 to Part 2, and complete the wiring for the L, N and Ground

inside Part 1 AC port accordingly:

*Note: L: Brown wire N: Blue wire G: Yellow/Green wire

Please use 12 AWG cable as AC end cable

3. Plug the AC port Part 2 into Part 1 once complete the wiring, and screw the Part 3 on

and complete the AC extension cable:

B) Connect the AC end cable to the AC male connector of the first microinverter to complete

the circuit.

C) Connect the other side of the AC end cable to the distribution box, and wire it to the local

grid network.

Step 4. Create an Installation Map

A) Peel the removable serial number label from each microinverter. (The position of the label

is shown as below.)

B) Affix the serial number label to the respective location on the installation map.

Step 5. Connect PV Modules

A) Mount the PV modules above the microinverter.

B) Connect the PV modules’ DC cables to the DC input side of the microinverter.

Step 6. Energize the System

A) Turn on the AC breaker of the branch circuit.

B) Turn on the main AC breaker of the house. Your system will start to generate power after

about two-minute wait time.

Step 7. Set Up the Monitoring System

Refer to the DTU User Manual or DTU Quick Install Guide, and Quick Installation Guide for

HMP Online Registration to install the DTU and set up your monitoring system.

Product information is subject to change without notice. (Please download reference manuals

at www.hoymiles.com.)

Otros manuales para MI-1000N

Este manual sirve para los siguientes modelos

Otros manuales de Inversor de Hoymiles

Hoymiles

Hoymiles HM-500T Manual de usuario

Hoymiles

Hoymiles HMT-1800 Series Manual de usuario

Hoymiles

Hoymiles HMS-800-2T-LV Manual de usuario

Hoymiles

Hoymiles HYT-5.0HV-AUG1 Manual de usuario

Hoymiles

Hoymiles HYS-8.0LV-EUG2 Manual de usuario

Hoymiles

Hoymiles HM-300 Manual de usuario

Hoymiles

Hoymiles HM-600P Manual de usuario

Hoymiles

Hoymiles MI-300 Manual de usuario

Hoymiles

Hoymiles MI-600 Manual de usuario

Hoymiles

Hoymiles HME-1200-AU Manual de usuario

Hoymiles

Hoymiles MI-300T Manual de usuario

Hoymiles

Hoymiles HMS-500-1A Manual de usuario

Hoymiles

Hoymiles HMS-1400C-4T Manual de usuario

Hoymiles

Hoymiles MI-1000T Manual de usuario

Hoymiles

Hoymiles HM-1000N Manual de usuario

Hoymiles

Hoymiles HM-300NT Manual de usuario

Hoymiles

Hoymiles MI-300NT Manual de usuario

Hoymiles

Hoymiles HMS-1600DW-4T Manual de usuario

Hoymiles

Hoymiles MI-600NT Manual de usuario

Hoymiles

Hoymiles HM-300T Manual de usuario

Hoymiles

Hoymiles HYS-7.6LV-USG1 Manual de usuario

Hoymiles

Hoymiles HMS-1000W-2T Series Manual de usuario

Hoymiles

Hoymiles MI-1000T Manual de usuario

Hoymiles

Hoymiles DTU-G100 3rd Gen Manual de usuario

Manuales populares de Inversor de otras marcas

Fourgroup

Fourgroup Easy Manual de usuario

Velleman

Velleman PI300M Manual de usuario

Sungrow

Sungrow SG350HX-US Manual de usuario

WilTec

WilTec 61897 Manual de usuario

SMA

SMA SUNNY BOY STORAGE 2.5 Manual de usuario

Simplicity

Simplicity LANDLORD 316 Manual de usuario

Santak

Santak SMAX 3000 Manual de usuario

ATON

ATON RA.Store-3 Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Manual de usuario

Tektronix

Tektronix CFG250 Manual de usuario

Champion

Champion 200989 Manual de usuario

Vanner

Vanner 20-500 Series Manual de usuario

GE GEP Manual de usuario

Astrel Group

Astrel Group Power Reducer Guía rápida

MULTIQUIP

MULTIQUIP GDP-5H Guía

GoWISE

GoWISE PS1007 Manual de usuario

Promate

Promate PM13500D ES Manual de usuario

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Manual de usuario