honor Color band A1 Manual de usuario
Color band A1
User Guide
1
Getting to know your Band
LED indicator
Charging cradle
Check that the box contents are complete. The box should contain 1
Band, 1 charging cradle, and 1 user guide.
Activating the Band
To activate your Band, charge it by connecting the charging cradle
to a phone charger or USB port. The LED indicator will blink blue and
orange to indicate that act ivation was successful. After the Band has
been activated, the LED indicator will turn orange to indicate that
the Band is charging.
Fully charge the battery before using the Band for the first time. The
LED indicator will turn blue once charging is complete.
2
You do not need to turn your Band on and off. It will turn off
automat ically when the battery level drops below 1%.
To view the remaining battery level, touch in the Color
Band A1 app.
Downloading the Color Band A1 app
Search for
Color Band A1
in Google Play or Apple's App Store to
download Color Band A1.
Connecting to your Band
1. Turn on Bluetooth on your phone.
2. On the the Color Band A1 app screen, touch >
Pair
, Look
for Honor Band A1 and touch it to connect.
Notifications for incoming calls/messages
1. Touch > >
Incoming call/Incaming message
.
2. Switch on
Enable notificat ions
and configure the alert period.
3
3. When the Band is paired with your phone and the Color Band A1
app is running in the background, the Band will vibrate and the LED
indicator will blink blue when you receive an incoming call or
message during the preset alert period.
Smart alarm
1. Touch > >
Smart alarm
.
2. Touch
Add alarm
. Conf igure the alarm settings and touch
Save
.
3. The Band will vibrate at the scheduled alarm time.
To delete an alarm, go to the alarm sett ings screen and touch
Remove
.
Viewing exercise and sleep data
The Band records your exercise and sleep data in real time. To view
your exercise and sleep data, touch , swipe down on the
screen to sync your data, and then swipe left or right to view the
data.
4
Sharing exercise data
1. Touch , and then touch the large exercise circle.
2. Touch
Share
to access the share tab.
3. Select a sharing method and follow the onscreen instructions.
Measuring UV radiation
Touch > >
UV monitoring version
and ensure that
you select the correct strap type
.
1. Open the Color Band A1 app. Swipe left to go to the UV sensor
screen.
2. Point the Band at the sun and touch
Test
. The UV radiation will be
displayed on the screen after a few seconds.
3. To view more detailed stat istics, touch the UV radiation circle.
5
Locat ing your Band
In the Color Band A1 app, touch > >
Find band
.Your
Band will vibrate and the LED indicator will blink blue.
Updating the Band software
1. Ensure that your phone is paired with your Band and connected to
the Internet over mobile data or Wi-Fi.
2. Touch > and follow the onscreen instructions.
Updating the Color Band A1 app
1. Ensure that your phone is connected to the Internet over mobile
data or Wi-Fi.
2. Touch > and follow the onscreen instructions.
6
Restoring factory settings
1. Touch > >
Restoring factory settings
.
2. Touch
OK
. The Band will automat ically restart.
Note:
When the Band's battery level is lower than 10%, the vibrat ion
funct ion for all features will be auto-disabled.
7
Safety information
Electrical devices
Do not use this device in areas where the use of wireless devices is
prohibited. It may interfere with other devices or present other
hazards.
Interference with medical equipment
Comply with all regulations in hospitals and health care facilit ies.
Turn this device off if the use of wireless devices is prohibited.
Some wireless devices may interfere with implantable medical
devices and other medical equipment, such as pacemakers,
cochlear implants, and hearing aids. Consult the manufacturer of
your medical equipment for more information.
Keep this device at a minimum distance of 15 cm from
implantable medical devices (such as pacemakers and cochlear
implants).
8
Areas with flammable and explosive substances
Do not use this device at gas stations or in areas containing
flammable or explosive substances. Always follow all warning
symbols and instruct ions.Using this device in or near areas that
contain oil, chemicals, and other flammable and explosive
substances may cause an explosion or fire.
Do not store or transport this device or its accessories in
containers with flammable liquids, gases, or explosives.
Road safety
Observe all local traffic laws and regulat ions while using this
device. Do not use this device while driving.
Concentrate on driving.Your first responsibility is to drive safely.
Wireless signals may interfere with vehicle electrical systems.
For more informat ion, consult your vehicle manufacturer.
9
Wireless devices may interfere with flight control systems.
Comply with all airline regulations and do not use this device if
the use of wireless devices is prohibited.
Operating environment
Avoid dusty, damp, or dirty environments and stay away from
magnetic fields. Using the device in these environments may
result in circuit malfunctions.
Use and store the Band at a temperature of -20°C to +50°C. The
relat ive humidity should not exceed 85%.
Do not allow the device or its accessories to come into
contact with rain or moisture. This const itutes a fire hazard and
may cause an electric shock.
Do not place the device near sources of heat or naked flames,
such as electrical heaters, microwaves, ovens, boilers, stoves,
and candles.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Rastreador de actividad física de honor
