•Event alarms are synced between the band and Health app.
•There is only one smart alarm by default. You cannot add more or delete the smart alarm. You can
set a maximum of five event alarms.
•The smart alarm may vibrate in advance if it detects that you woke up before the alarm is set to go
off using TruSleep™. If TruSleep™ isn't enabled, the smart alarm will vibrate in advance if it
detects that you are no longer in deep sleep or already awake.
•When the alarm vibrates, touch , swipe right or press the side button of the band to snooze
(for 10 minutes). Touch to stop the alarm. Touch to dismiss the alarm. The alarm
will stop on its own if no other operation has been performed for five minutes.
•Currently, alarms set on phones running Magic UI 2.0 or later can be synced to the band.
Receiving weather reports
Receiving weather reports
You can check your band to find out about the weather in your local area.
Viewing pushed weather reports
•Method 1: View the weather information on the weather screen
•Swipe right on the band screen until you find the weather screen, then you can check your
location, the latest weather, temperature, air quality, and more.
•Method 2: View the weather information on the weather watch face
•Make sure you are using a band design that displays the weather on the home screen. Once this
is set up, you will be able to see the latest weather reports on the main screen of your band.
•Method 3: View the weather information in the Weather app
•From the band's home screen press the button to enter the app list, swipe on the screen until you
find Weather and select it, then you can view your location, the latest weather, temperature, air
quality, and more. Swipe up or down on the screen to view a 6-hour weather cast, as well as the
weather yesterday and the next six days.
•Make sure that GPS and Location are enabled in the notification panel of the phone and that
Health has been granted the Location permission. Open areas are better for getting a GPS signal.
•The weather information displayed on your band may differ slightly from that displayed on your
phone, this is because the information is collected from different weather service providers.
Incoming calls
When the band is connected to the phone and is being worn properly, the band's screen will turn
on and the band vibrates to notify you of any incoming calls.
Getting started
6
