Honeywell T6 Pro Hydronic Manual de usuario

T6 Pro Hydronic

Programmable Thermostat

User Guide

Package Includes:

• T6 Pro Hydronic Programmable

Thermostat

• Floor sensor (model AQ12C20)

• UWP™ Mounting System

• Honeywell Standard Installation

Adapter (J-box adapter)

• Honeywell Decorative Cover Plate –

Small; size 449/64 in x 449/64 in x

11/32 in (121 mm x 121 mm x 9 mm)

• Screws and anchors

• 2 AA Batteries

• Installation Instructions and User

Guide

Call Honeywell Customer Care toll-free at 18004681502.

Customer assistance

Thermostat controls

• System status

information

Heat On/Recovery

• Schedule information

Following time based

schedule

• Actual time

• Mode

Select system mode

Heat/Off

• Menu

Press to display options.

Start here to set a

program schedule

• Indoor temperature

setpoint

Press + or – to change

temperature setting

• Actual indoor

temperature

• Temperature/

Navigation buttons

Press to increase or

decrease temperature

setpoint and to

navigate menus and

menu options

The screen will wake up by pressing any of the five buttons. If powered by the C wire, the screen stays lit for 45 seconds

after you complete changes. If powered by battery only, the screen stays lit for 8 seconds. Depending on how your

thermostat was installed, the screen light may always be on.

Temperature control modes

Your T6 Pro Hydronic Programmable Thermostat can be set to operate in one

of 3 different control modes. These settings determine which temperature is

measured, controlled and displayed on the thermostat home screen. Each

thermostat in your home can be set to a different control mode. Please ask your

local heating professional which control mode is used for you to better control the

Thermostat.

A, AF mode; main screen

F mode; main screen

A mode (Air temperature only): Controls and

displays the ambient air temperature only.

F mode (Floor temperature only): Controls

and displays the floor temperature only using

an external floor temperature sensor. This

control mode is typically used in areas such as

bathrooms where floor temperature could be

scheduled to be warm only during occupied,

morning and evening periods.

• Actual floor temperature is indicated

by “FLR” text above the actual floor

temperature value.

• Floor temperature setpoint is not

displayed until you press or for

setting it.

• Actual ambient air temperature could also

be displayed in the thermostat MENU/

TEMP.

AF mode (both Air and Floor temperatures):

Controls and displays the ambient air

temperature as well as maintains the floor

temperature within desired floor temperature

limits using an external floor temperature

sensor. Setting the minimum and maximum

floor temperature limits is done by your local

heating professional and is a way for you to

enhance the comfort and to protect your floor

covering at the same time.

• Minimum floor temperature limit will

override the air temperature in this mode,

and if set too high, may overheat the

room. Please contact your installer if this

occurs.

• Actual floor temperature could also be

displayed in the thermostat MENU/

TEMP.

Temperatures menu

Back

System operation settings

1 Press the Mode button to cycle to the next

available System mode.

2 Cycle through the modes until the required

System mode is displayed and leave it to

activate.

System modes:

‒Heat

‒Off

Set the time and date

Time

1 Press Menu on your thermostat.

2 Press or to go to TIME. Press Select.

3 Press or to choose between 12 or 24 hour.

Press Select.

4 Use or to adjust the hour. Press Select.

5 Use or to adjust the minutes. Press Select

to exit Time menu.

Date

1 If previously setting time, continue to Step

2. If at the Home screen, press Menu on your

thermostat.

2 Press or to go to DATE. Press Select.

3 Use or to adjust year. Press Select.

4 Use the or to adjust month. Press Select.

5 Use the or to adjust day. Press Select to

save and exit Date menu.

Program Schedule

To adjust program schedules

You can program four time periods each day, with different settings for weekdays

and weekends. We recommend the pre-sets (shown in the table below), since they

can reduce your heating expenses.

Wake - Set to the time you wake up and the

temperature you want during the morning, until

you leave for the day.

Away - Set to the time you leave home and the

temperature you want while you are away (usually

an energy-saving level).

Home - Set to the time you return home and the

temperature you want during the evening, until

bedtime.

Sleep - Set to the time you go to bed and the

temperature you want overnight (usually an

energy-saving level).

NOTE: To temporarily or permanently override any

of the above program schedules, see page 5.

Depending on which temperature control mode the thermostat is configured

for (see page 2), you will be programing either air or floor temperature. Floor

temperature will be indicated with FLR text above the actual temperature value.

1 Press Menu on your thermostat.

2 PROG is displayed. Press Select. Then ON

is displayed. (If you do not want to use a

schedule, press or to display OFF. Press

Select.) Press Select.

3 Press or to select day or set of days to

edit. Press Select.

4 Press or to select a schedule period to

edit (Wake, Away, Home, and Sleep). Press

Select.

5 ON is displayed. Press Select to keep the

schedule period on. Or press and then Select

to turn off the schedule period.

6 Time starts blinking. Press or to adjust

the schedule period start time. Press Select.

7 Temperature starts blinking. Press or to

adjust the “Heat” setpoint temperature. Press

Select.

8 Repeat steps 4 through 7 for the remaining

schedule periods.

9 Press Home when you’re finished to save and

return to the home screen.

10 Schedule can be adjusted and turned ON or

OFF by returning to Menu and following the

steps provided above.

Air

Temperature

(A mode/

AF mode)

Floor

Temperature

(F mode)

Wake

(6:00 am)70 °82°

Away

(8:00 am)62 °68 °

Home

(6:00 pm)70 °82°

Sleep

(10:00

pm)62 °68 °

M37076

Program schedule override (permanent)

Program schedule override (temporary)

1 Press or to adjust the temperature.

2 Once at the desired setpoint temperature,

no further action is needed. The new

setpoint temperature will be held until the

next scheduled time period begins. For more

information on schedule time periods, see

“Program Schedule” on page 4.

3 To cancel the Temporary Hold, Press or

and then press Cancel.

1 Press or to adjust the temperature.

2 TEMPORARY HOLD is displayed and

the setpoint temperature flashes. While

it’s flashing, press Hold (Mode) button to

change to Permanent Hold.

3 To cancel the Permanent Hold, press or

and then press Cancel.

NOTE: Depending on which temperature

control mode the thermostat is configured for

(see page 2), you will be adjusting either

air or floor temperature. Floor temperature will

be indicated with FLR text above the actual

temperature value. Floor temperature setpoint

is hidden on home screen in this case and will

be displayed again by pressing or .

Hold

Vacation program schedule override (temporary)

Vacation overrides the current program schedule for a

longer period of time. You might use this feature when you

know you’ll be away for awhile.

1 Press Menu on your thermostat.

2 Press or to go to VACA. Press Select. Days number

starts blinking.

3 Press or to set the number of days you want the new

temperature setpoint to override your program schedule.

Press Select. Temperature setpoint starts blinking.

4 Press or to adjust the temperature setpoint for these

days. Press Select to activate your vacation schedule and

return to the thermostat home screen.

NOTES:

• The active vacation schedule is indicated via VACA

above the temperature displayed on the thermostat

home screen.

• After vacation period ends, the thermostat will follow

your regular program schedule.

• To return back to your normal program schedule

before the vacation schedule ends, press Cancel on the

thermostat home screen.

ECO (Economy) mode

If your thermostat is configured to operate in AF mode (see

page 2) and the program schedule is followed, you can

disable the minimum floor temperature limits set by your

local heating professional during away and sleep periods.

Depending on your heating system installation and floor

type used, disabling the minimum floor temperature limit

setting can reduce your energy bills during times when

comfort is not required (Away and Sleep periods). Your floor

covering and system remains protected as the thermostat

keeps controlling maximum floor temperature limit and

minimum freeze protection temperature all the time.

1 Press Menu on your thermostat.

2 Press or to go to ECO. Press Select.

3 Press or to turn Eco mode ON or OFF. Press Select.

NOTE: Eco mode is available in thermostat menu only

if thermostat is configured for AF control mode and is

disabled (OFF) by default.

MCR37071

Home

Select

MCR37072

Home

Back Select

Home

Back Select

Heat

MCR37073

Home

Select

MCR37075

Setting degrees Fahrenheit (F) or Celcius (C)

1 Press Menu.

2 Press or to go to F / C. Press Select.

3 Press or to select For C. Then press

Select.

4 Press Home to return to the home screen.

Adaptive Intelligent Recovery

Over time, the Honeywell T6 Pro Thermostat “learns” how long it takes your

system to reach the temperature you want. It turns on the heating system earlier

to make sure you’re comfortable at the time you expect.

Adjusting keypad lockout

1 Press Menu on the thermostat.

2 Press or to go to LOCK. Press Select.

3 Press or to go to OFF, PART, or ON, and then press Select.

OFF: Unlocked, and full access allowed.

PART: Partial lockout, allowing only the temperature to be changed.

ON: No access allowed.

4 To unlock the keypad, press the CENTER button and then enter the password

“1234”. To enter the password, press or to change the first digit of the

number. Then press Select. Repeat this process to enter the second through

fourth digits of the number. Once all four numbers have been entered, press

Select again.

5 This will unlock the keypad.

6 If the code is incorrect, the screen will flash the lines "--".

7 Press Back to go back a step to enter the correct number and press Select.

Batteries are optional (to provide backup

power) if your thermostat was wired to run on

AC power when installed. If your thermostat

was not wired to run on AC power, then

batteries are required.

Install fresh batteries immediately when the

low battery icon appears. The icon appears

about two months before the batteries are

depleted.

Even if the low battery icon does not appear,

you should replace batteries once a year, or

before leaving home for more than a month.

If batteries are inserted within two minutes, the

time and day will not have to be reset. All other

settings are permanently stored in memory,

and do not require battery power.

NOTE: When replacing batteries, alkaline

batteries are recommended.

Battery replacement

Insert fresh alkaline AA

batteries and reinstall

thermostat.

When the low battery

warning appears, press

gently to loosen the

thermostat and then

carefully pull it from the

wall mount.

Alerts

If there is an alert or reminder, the alert icon

appears on the Home screen.

Low Battery Warning

1 The batteries need to be replaced when

BATT, the alert icon , and the battery icon

are displayed on the Home screen.

2 When the battery power is very low, the

thermostat’s backlight is disabled to save

battery power.

3 When battery power is critically low, only

BATT, the alert icon , and the battery icon

are displayed.

Heat

Home

Back

Snoozing and Clearing Alerts or

Reminders*

1 Press Menu, and then press until display

shows ALRT.

2 Press Select to display which alert(s) are

present.

3 The word SNZE (SNOOZE) appears.

4 Press Select again to snooze the reminder for

7 days.

5 To clear the alert, press Select, and then

press to go to CLER (Clear).

6 Press Select to clear the reminder.

* Some alerts cannot be snoozed or cleared.

Please call your local heating professional if

this occurs. The system may require service.

Troubleshooting

If you have difficulty with your thermostat, please try the following suggestions.

Most problems can be corrected quickly and easily.

Display is

blank

• Check circuit breaker and reset if necessary.

• Make sure power switch for heating system is on.

• Make sure fresh AA alkaline batteries are correctly installed

(see page 8).

Heating

system does

not respond

• Press Mode button to set system Heat (see page 3).

Make sure the desired temperature is set higher than the

inside temperature.

• Check circuit breaker and reset if necessary.

• Make sure power switch for heating system is on.

• Wait 5 minutes for the system to respond.

Temperature

settings do

not change

Make sure heating temperature is set to an acceptable range:

• Heat: 40 °F to 90 °F (4.5 °C to 32.0 °C)

Otros manuales para T6 Pro Hydronic

Tabla de contenidos

Otros manuales de Termostato de Honeywell

Honeywell

Honeywell RTH111 series Manual de usuario

Honeywell

Honeywell CM701 Manual de usuario

Honeywell

Honeywell RTHL2510 series Manual de usuario

Honeywell

Honeywell Q539A Manual de usuario

Honeywell

Honeywell T8011F Manual de usuario

Honeywell

Honeywell ST9400C Manual de usuario

Honeywell

Honeywell RLV3100 Manual de usuario

Honeywell

Honeywell RTH2300 series Manual de usuario

Honeywell

Honeywell DT92E Manual de usuario

Honeywell

Honeywell CMT707 Manual de usuario

Honeywell

Honeywell RCT8100 Manual de usuario

Honeywell

Honeywell T7351 Manual del propietario

Honeywell

Honeywell RTH110B Manual de usuario

Honeywell

Honeywell RTH9590 Manual de usuario

Honeywell

Honeywell CT1501 Manual de usuario

Honeywell

Honeywell T8665A Chronotherm IV Manual de usuario

Honeywell

Honeywell ST9400C Manual de usuario

Honeywell

Honeywell RTHL2410 series Manual de usuario

Honeywell

Honeywell T8424D Manual de usuario

Honeywell

Honeywell RTH9585 Wi-Fi Manual de instrucciones

Honeywell

Honeywell T4098A Manual de operación

Honeywell

Honeywell FocusPRO 5000 Manual de usuario

Honeywell

Honeywell TB7200 Series Manual de uso y cuidado

Honeywell

Honeywell Y87RF Manual de usuario

Manuales populares de Termostato de otras marcas

EWELLY

EWELLY EW-181 Manual de usuario

Prolon

Prolon T1100 Instrucciones de instalación

Computherm

Computherm Q20 Manual de usuario

Heatmiser

Heatmiser neoStat Manual de usuario

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario

Saswell

Saswell SAS920XWHB-7-S-RF Guía

Aircalo

Aircalo TFP1-ET85P2 Manual de usuario

Carrier

Carrier DEBONAIR 33CS Manual de usuario

Lennox

Lennox iHarmony Zone Thermostat Instrucciones de montaje

Gemtech

Gemtech GT7000 Manual de instrucciones

Rollei

Rollei Smartes 45000 Manual de usuario

Sinope

Sinope TH1300RF Manual de usuario

NuTone

NuTone NTBZ48 Instrucciones de funcionamiento originales

Stelpro

Stelpro MAESTRO ASMT402AD Manual de usuario

Aube Technologies

Aube Technologies TH305 Manual de usuario

Powtier Controls

Powtier Controls 505MST Manual de usuario

Kanmor

Kanmor Zone Control 369e Manual de usuario