Honeywell RTH7000 Manual de usuario

Operating

Manual

RTH7000 Series

Programmable Thermostat

Read and save these instructions

Need Help?

For assistance with this product please visit http://yourhome.honeywell.com

or call Honeywell Customer Care toll-free at 1-800-468-1502

CAUTION: EQUIPMENT DAMAGE HAZARD. To prevent possible compressor damage,

do not operate cooling system when outdoor temperature is below 50°F (10°C).

® U.S. Registered Trademark.

Patents pending.

This manual covers RTH7400 and RTH7500 models.

(Pull thermostat from wallplate and turn over to find model number)

RTH7400/RTH7500

About your new thermostat

Thermostat features ..........................2

Programming at a glance..................3

Quick reference to controls ..............4

Quick reference to status display ....5

Programming & Operation

Clock setting ......................................6

Fan setting ........................................7

System setting....................................8

Using program schedules ................9

Program schedule overrides ..........13

Furnace filter reminder ....................15

Special features ..............................16

Appendices

Battery replacement ........................17

In case of difficulty ..........................18

Limited warranty ..............................20

Table of contents

This thermostat is ready to go!

Your new thermostat is pre-

programmed and ready to go.

See page 3 to check settings.

Operating Manual

About your new thermostat

Congratulations! You’ve just purchased the world’s most advanced, easy-to-use

thermostat. It has been designed to give you many years of reliable service and

touchscreen climate control.

Features

• Daily program schedules maximize comfort and economy.

• EnergyStar®compliant to greatly reduce your heating/cooling expenses.

• One-touch temp control overrides program schedule at any time.

• Precise comfort control keeps temperature within 1°F of the level you set.

• Change/check reminder lets you know when to replace furnace filter.

• Large screen display with backlight is easy to read — even in the dark.

RTH7400/RTH7500

This thermostat is ready to go!

Your new thermostat is pre-programmed and ready to go. All you have to do is set

the time and day. Then check the settings below and change if needed:

1Set clock ..................................................................................................See page 6

2Select fan setting: Preset to Auto ......................................To change, see page 7

3Select system setting: Preset to Heat................................To change, see page 8

4Program schedules: Preset to energy-saving levels

while you’re at work or asleep (assumes you

wake at 6 am, leave at 8 am, return at 6 pm

and go to bed at 10 pm)................................................To change, see pages 10-14

ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time,

and manually adjust the temperature (see pages 13-14).

Operating Manual

Quick reference to controls

Arrow buttons

Press to adjust temperature (see pages 11-14), or to make selections from screen menus.

Schedule

Press to set program schedule (see pages 11-12).

System & Fan

Press to select fan

operation (see

page 7) or system

(see page 8).

Clock & More

Press to set

clock (see

page 6) or fur-

nace filter

reminder.

RTH7400/RTH7500

Quick reference to status display

Current inside temperatureCurrent day of week

Temperature setting

System setting

(see page 8) Fan setting

(see page 7)

Mon

Set To

70 6:01 AM 70

System

Cool

Fan Auto

Recovery Heat On

System & Fan Schedule Clock & More

Current time

Smart Response®

Technology in effect

(see page 15)

Other display messages:

•Cool On: Cooling system is activated

•Heat On: Heating system is activated

•Aux Heat On: Auxiliary heating system is

activated (heat pump systems only)

System & Fan Schedule Clock & More

Operating Manual

Clock setting

To set the current time display, press

CCLLOOCCKK, then press or to adjust

the time. Press and hold or to

advance the time more quickly.

Press DDOONNEEto save & exit (or press GGOO

BBAACCKKto exit without changing the

time).

Note: The real-time clock should never

require adjustment since it automatically

updates for daylight savings time, and

stores all date/time information.

Note: To change the current week day

display, see System Setup in your

Installation Guide.

Press CCLLOOCCKK

Adjust time, then press DDOONNEE

6:01 AM

Go Back Done

Mon

RTH7400/RTH7500

Fan setting

Press SSYYSSTTEEMM&&FFAANN, then FFAANNto select fan

operation:

•On: Fan is always on.

•Auto: Fan runs only when the heating or

cooling system is on.

System

Heat

Fan Auto

System Fan Done

Press FFAANNto select mode, then press DDOONNEE

System & Fan Schedule Clock & More

Press SSYYSSTTEEMM&&FFAANN

Operating Manual

System setting

Follow steps at left to select system:

•Heat: Thermostat controls only the

heating system.

•Cool: Thermostat controls only the

cooling system.

•Auto: Thermostat automatically selects

heating or cooling depending on the

indoor temperature.

•Off: All systems are off.

•Em Heat (only for heat pumps with

auxiliary heat): Thermostat controls

Emergency and Auxiliary Heat.

Compressor is locked out.

Note: The Auto and Em Heat system

settings may not appear, depending on how

your thermostat was installed.

System

Heat

Fan Auto

System Fan Done

Press SSYYSSTTEEMMto select mode,

then press DDOONNEE

System & Fan Schedule Clock & More

Press SSYYSSTTEEMM&&FFAANN

Otros manuales para RTH7000

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Termostato de Honeywell

Honeywell

Honeywell T8611G Chronotherm IV Deluxe Manual de usuario

Honeywell

Honeywell HH07AT216 Manual de usuario

Honeywell

Honeywell T7200 Manual de usuario

Honeywell

Honeywell T8602C Manual de usuario

Honeywell

Honeywell RedLINK Manual de usuario

Honeywell

Honeywell T7100D Manual de operación

Honeywell

Honeywell RTH7600 Series Manual de usuario

Honeywell

Honeywell DT90E Manual de usuario

Honeywell

Honeywell RTH111 series Manual de usuario

Honeywell

Honeywell RTH2300 series Manual de usuario

Honeywell

Honeywell MagicStat CT2400 Manual de usuario

Honeywell

Honeywell RTH2410B1001E1 Manual de usuario

Honeywell

Honeywell VTL120 Manual de usuario

Honeywell

Honeywell CT70 Manual de usuario

Honeywell

Honeywell Thermostats Guía del usuario

Honeywell

Honeywell TH9320WF5003/U Manual de usuario

Honeywell

Honeywell T7512B Manual de usuario

Honeywell

Honeywell RTH2300 series Manual de usuario

Honeywell

Honeywell PRO TH4110D Manual de usuario

Honeywell

Honeywell T6R-HW Manual de usuario

Honeywell

Honeywell T641A Manual de usuario

Honeywell

Honeywell TB3026B Manual de usuario

Honeywell

Honeywell Perfect Climate Comfort Center PC8900 Manual de usuario

Honeywell

Honeywell ComfortNET CTK04 Guía del usuario

Manuales populares de Termostato de otras marcas

EWELLY

EWELLY EW-181 Manual de usuario

Prolon

Prolon T1100 Instrucciones de instalación

Computherm

Computherm Q20 Manual de usuario

Heatmiser

Heatmiser neoStat Manual de usuario

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario

Saswell

Saswell SAS920XWHB-7-S-RF Guía

Aircalo

Aircalo TFP1-ET85P2 Manual de usuario

Carrier

Carrier DEBONAIR 33CS Manual de usuario

Lennox

Lennox iHarmony Zone Thermostat Instrucciones de montaje

Gemtech

Gemtech GT7000 Manual de instrucciones

Rollei

Rollei Smartes 45000 Manual de usuario

Sinope

Sinope TH1300RF Manual de usuario

NuTone

NuTone NTBZ48 Instrucciones de funcionamiento originales

Stelpro

Stelpro MAESTRO ASMT402AD Manual de usuario

Aube Technologies

Aube Technologies TH305 Manual de usuario

Powtier Controls

Powtier Controls 505MST Manual de usuario

Kanmor

Kanmor Zone Control 369e Manual de usuario