Honeywell PRO 2000 Series Manual de usuario

Operating

Manual

PRO 2000 Series

Programmable Thermostat

69-2608EFS-05

Read and save these instructions.

Need Help?

For assistance with this product please visit http://customer.resideo.com

CAUTION: EQUIPMENT DAMAGE HAZARD.

To prevent possible compressor damage, do not operate cooling system when outdoor

temperature is below 50°F (10°C).

This manual covers the following models:

TH2110DH: For 1 Heat/1 Cool systems

TH2210DH: For 2 Heat/1 Cool heat pump systems only

(Pull thermostat from wallplate and turn over to find model

number.)

PRO 2000

1 69-2608EFS—05

About your new thermostat

Thermostat features ........................................ 2

Thermostat is preset, ready to go............... 3

Quick reference to controls........................... 4

Quick reference to display............................. 5

Programming & Operation

Set time and day................................................ 6

Select system setting ...................................... 7

Select fan setting .............................................. 8

Using program schedules ..................... 9–10

Adjust program schedule ............................11

Program schedule overrides ..............12–13

Compressor protection.................................14

Early Start ..........................................................15

Appendices

Battery replacement ......................................16

Customer assistance.....................................17

In case of difficulty.................................18–19

Limited warranty .............................................20

This thermostat is ready to go!

Your new thermostat is pre-programmed

and ready to go.

See page 9 to check settings.

Table of contents

ENGLISH

About your new thermostat

Your new Resideo thermostat has been designed to give you many years of reliable

service and easy-to-use, push-button climate control.

Features

• Backlit display is easy to read

• Displays ambient (measured) temperature at all times

• One-touch access to setpoint temperature

• Preset program settings

• Temporary and permanent override of schedule

• Early start ensures the right temperature at the right time

• Built-in compressor protection

Operating Manual

PRO 2000

3 69-2608EFS—05

ENGLISH

This thermostat is ready to go!

Your new thermostat is pre-programmed and ready to go. All you have to do is set

the time and day. Then check the settings below and change if needed:

1. Set time and day (required for proper operation)....................................See page 6

2. Select system setting: Preset to Off...........................................To change, see page 7

3. Select fan setting: Preset to Auto..............................................To change, see page 8

4. Program schedules: Preset to energy-saving levels

while you’re at work or asleep ........................................... To change, see pages 9-11

ONETOUCH TEMP CONTROL: You can override the program schedule at any time, and

manually adjust the temperature (see pages 1213).

Operating Manual

69-2608EFS—05 4

ENGLISH

System switch (see page 7)

• Cool: Cooling system control.

• Off: All systems off.

• Heat: Heating system control.

• Em Heat: Emergency & Auxiliary Heat control.

Compressor is locked out. (Select models only.)

M32781

E.M. Heat Heat Off Cool Auto On

Fan

Quick reference to controls

Temperature

adjustment

Screen Lit for 12 seconds when you press any button.

Fan Switch (see page 8)

On: Fan runs continuously.

Auto: Fan runs only when heating

or cooling system is on.

Set: Press to set time/

day/schedule.

Hold: Press to override

programmed tempera-

ture control.

Run: Press to resume

program schedule.

PRO 2000

5 69-2608EFS—05

ENGLISH

M32701

Batt

Wake

Set

Heat

6:30

Quick reference to display screen

Low battery warning

(see page 16)

Setpoint indicator

Appears when the

setpoint temperature

is displayed.

Temperature

The ambient (measured)

temperature is normally

displayed. To view the

setpoint temperature,

press the Up or Down

button once. The setpoint

temperature will appear

for five seconds.

System status

Cool On: Cooling system is on.

Heat On: Heating system is on.

Aux On: Auxiliary heat is on. (Only for heat pumps with this capability [select models only].)

When Heat On or Cool On is flashing, compressor protection is engaged (see page 14).

Current day/time

(see page 6)

Current program period

Wake/Leave/Return/Sleep

(see pages 910)

Operating Manual

69-2608EFS—05 6

ENGLISH

Set Time

6:30

M32702

Set Day

M32703

Set the time and day

1. Press the SET button, then press s or

t to set the clock time.

2. Press the SET button, then press s or

t to select the day of the week.

3. Press RUN to save & exit.

Note: If the clock flashes, the thermostat will

follow your settings for the Monday “Wake” time

period until you reset the time and day.

Press SET, then adjust time.

Press SET, then select current day.

PRO 2000

7 69-2608EFS—05

ENGLISH

M32781

E.M. Heat Heat Off Cool Auto On

Fan

Select the system setting

The SYSTEM switch can be set to control

your heating or cooling system, depend-

ing on the season.

• Cool: Cooling system control.

• Off: All systems are off.

• Heat: Heating system control.

• Em Heat: Emergency & Auxiliary

Heat control. Compressor is locked

out. (Select models only.)

Set SYSTEM switch to control the

heating or cooling system.

CAUTION: EQUIPMENT DAMAGE

HAZARD. To prevent possible

compressor damage, do not operate

cooling system when outdoor

temperature is below 50°F (10°C).

Operating Manual

69-2608EFS—05 8

ENGLISH

Select the fan setting

Set the FAN switch to Auto or On.

In “Auto” mode (the most commonly used

setting), the fan runs only when the heat-

ing or cooling system is on.

If set to “On,” the fan runs continuously.

Set FAN switch to choose whether the fan

runs continuously or only as needed.

M32781

E.M. Heat Heat Off Cool Auto On

Fan

Otros manuales para PRO 2000 Series

Tabla de contenidos

Otros manuales de Termostato de Honeywell

Honeywell

Honeywell LYRIC T4 Manual de usuario

Honeywell

Honeywell Chronotherm III T8602A Manual de usuario

Honeywell

Honeywell RTH6300B Manual de usuario

Honeywell

Honeywell Wi-Fi Thermostat 9000 Manual de usuario

Honeywell

Honeywell LYRIC T4 Instrucciones de instalación

Honeywell

Honeywell RTH4300B1000 Manual de usuario

Honeywell

Honeywell CT30 Series Manual de usuario

Honeywell

Honeywell rth230b Manual de usuario

Honeywell

Honeywell Super Tradeline Q674L Manual de usuario

Honeywell

Honeywell T8002 Manual de usuario

Honeywell

Honeywell Evohome Manual de usuario

Honeywell

Honeywell TH8320ZW Manual de usuario

Honeywell

Honeywell T8611M7065 Manual de usuario

Honeywell

Honeywell TB7220U Manual de usuario

Honeywell

Honeywell PRO 2000 Series Manual de usuario

Honeywell

Honeywell lyric round Manual de usuario

Honeywell

Honeywell PRO 2000 Series Manual de usuario

Honeywell

Honeywell VisionPRO Wi-Fi TH8320WF Manual de usuario

Honeywell

Honeywell TH4210U2002 Manual de usuario

Honeywell

Honeywell TL7135A Manual de usuario

Honeywell

Honeywell RTH2300 series Manual de usuario

Honeywell

Honeywell Lyric T5 Wi-Fi Manual de usuario

Honeywell

Honeywell TB7600 Manual de usuario

Honeywell

Honeywell RTH2300 series Manual de usuario

Manuales populares de Termostato de otras marcas

EWELLY

EWELLY EW-181 Manual de usuario

Prolon

Prolon T1100 Instrucciones de instalación

Computherm

Computherm Q20 Manual de usuario

Heatmiser

Heatmiser neoStat Manual de usuario

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario

Saswell

Saswell SAS920XWHB-7-S-RF Guía

Aircalo

Aircalo TFP1-ET85P2 Manual de usuario

Carrier

Carrier DEBONAIR 33CS Manual de usuario

Lennox

Lennox iHarmony Zone Thermostat Instrucciones de montaje

Gemtech

Gemtech GT7000 Manual de instrucciones

Rollei

Rollei Smartes 45000 Manual de usuario

Sinope

Sinope TH1300RF Manual de usuario

NuTone

NuTone NTBZ48 Instrucciones de funcionamiento originales

Stelpro

Stelpro MAESTRO ASMT402AD Manual de usuario

Aube Technologies

Aube Technologies TH305 Manual de usuario

Powtier Controls

Powtier Controls 505MST Manual de usuario

Kanmor

Kanmor Zone Control 369e Manual de usuario