Honeywell INNCOM E528.4G Manual de usuario

Page 1 - Set RID, PAN ID and RF Channel in E528.4G and E527.4G

Set Room ID, PAN ID and RF Channel in INNCOM

E528.4G and E527.4G Thermostats

Enter Service Mode

Service mode is accessed by executing the following button sequence:

1. Press and hold F/C.

2. Press and release OFF/AUTO.

3. Press and release DISPLAY.

4. Release F/C.

The LCD display will now read “rid” confirming that you are in service mode.

Set Room ID

A unique 5-digit Room ID is required in each INNCOM thermostat.

Enter Service Mode and follow the procedure below to set the Room ID of the thermostat.

1. Scroll to rId

2. Press DISPLAY button and the current Room ID will scroll on the display.

3. After the Room ID scrolls, the highest digit of the Room ID will be displayed with the

HI fan indicator. Use the up or down arrow buttons to change the value and press

OFF/AUTO.

4. The next 2 digits of the Room ID are now displayed along with the MED fan indicator.

Use the up or down arrow buttons to change the value and press OFF/AUTO.

5. The last 2 digits of the Room ID are now displayed along with the LO fan indicator

Use the up or down arrow buttons to change the value and press OFF/AUTO.

6. Press the DISPLAY button to store the new Room ID. The new Room ID will scroll

across the display.

Example of RID for Room 515 (00515)

Page 2 - Set RID, PAN ID and RF Channel in E528.4G and E527.4G

Set PAN ID

PAN ID is the Personal Area Network ID of the thermostat. The PAN ID is used in networked

systems where the PAN ID of the thermostat must match the PAN ID of the router it is

assigned to.

Enter service mode and follow the procedure below to set the PAN ID in the thermostat

1. In Service Mode, go to PAn and press DISPLAY to view the value.

2. Change the displayed value to the assigned PAN ID and press the DISPLAY button to

set. The thermostat will beep to indicate the value has been entered.

Set RF Channel

The RF channel is used for both in-room RF communication and RF network

communication. In most cases the default RF channel of 26 will be used. In networked

systems, the RF channel in the thermostat must match the RF channel in the router it is

assigned to.

Enter service mode and follow the procedure below to set the RF Channel in the thermostat

1. In Service Mode, go to rf and press DISPLAY to view the value.

2. Change the displayed value to the assigned RF channel and press the DISPLAY

button to set. The thermostat will beep to indicate the value has been entered.

Exit Service Mode

Press F/C to exit service mode. You may need to press F/C multiple times to fully exit

from submenus within service mode.

Este manual sirve para los siguientes modelos

1

Tabla de contenidos

Otros manuales de Termostato de Honeywell

Honeywell

Honeywell PRO TH3110D Manual de usuario

Honeywell

Honeywell TB6575B1000/U - SuitePro Digital Fan Coil... Manual de usuario

Honeywell

Honeywell PRO 1000 Series Manual de usuario

Honeywell

Honeywell RTH7000 Manual de usuario

Honeywell

Honeywell RET97B5D Manual de usuario

Honeywell

Honeywell Q539A Manual de usuario

Honeywell

Honeywell RTH7400 series Manual de usuario

Honeywell

Honeywell 8160 Manual de usuario

Honeywell

Honeywell T6861 Series Manual de instrucciones

Honeywell

Honeywell Inncom E527 Manual de usuario

Honeywell

Honeywell TRADELINE Electronic Thermostat Manual de usuario

Honeywell

Honeywell TL8100 Manual de usuario

Honeywell

Honeywell T Series Manual de usuario

Honeywell

Honeywell RTH110B Manual de usuario

Honeywell

Honeywell TH7000 Series Manual de usuario

Honeywell

Honeywell RTH9590 Manual de usuario

Honeywell

Honeywell RTH6400 Series Manual de usuario

Honeywell

Honeywell PRESTIGE THX9321 Guía del usuario

Honeywell

Honeywell FocusPRO Wi-Fi TH6000 Series Manual de usuario

Honeywell

Honeywell DT70 Series Manual de usuario

Honeywell

Honeywell TR80 Manual de usuario

Honeywell

Honeywell CT230-GA Manual de usuario

Honeywell

Honeywell Lyric T5 Wi-Fi Manual de usuario

Honeywell

Honeywell RLV430 Manual de usuario

Manuales populares de Termostato de otras marcas

EWELLY

EWELLY EW-181 Manual de usuario

Prolon

Prolon T1100 Instrucciones de instalación

Computherm

Computherm Q20 Manual de usuario

Heatmiser

Heatmiser neoStat Manual de usuario

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario

Saswell

Saswell SAS920XWHB-7-S-RF Guía

Aircalo

Aircalo TFP1-ET85P2 Manual de usuario

Carrier

Carrier DEBONAIR 33CS Manual de usuario

Lennox

Lennox iHarmony Zone Thermostat Instrucciones de montaje

Gemtech

Gemtech GT7000 Manual de instrucciones

Rollei

Rollei Smartes 45000 Manual de usuario

Sinope

Sinope TH1300RF Manual de usuario

NuTone

NuTone NTBZ48 Instrucciones de funcionamiento originales

Stelpro

Stelpro MAESTRO ASMT402AD Manual de usuario

Aube Technologies

Aube Technologies TH305 Manual de usuario

Powtier Controls

Powtier Controls 505MST Manual de usuario

Kanmor

Kanmor Zone Control 369e Manual de usuario