Honeywell FocusPRO TH5000 Series Manual de usuario

&OCUS02/TM¬4(¬3ERIESNon-Programmable Digital Thermostat

69-1923ES

Operating

Manual

Read and save these instructions.

® U.S. Registered Trademark. Patents pending.

Battery Holder

Press down and pull to remove

batteries. Batteries should be

replaced once a year (see page 10).

Need Help?

For assistance with this product please visit http://yourhome.honeywell.com

or call Honeywell Customer Care toll-free at 1-800-468-1502

This manual covers the following models:

TH5110D: For 1 Heat/1 Cool systems

TH5220D: For up to 2 Heat/2 Cool systems

TH5320U: For up to 3 Heat/2 Cool systems

(Remove battery holder to find model number)

FocusPROTM TH5000 Series

About your new thermostat

Thermostat features...................................2

Setup at a glance.......................................3

Quick reference to controls.......................4

Quick reference to display ........................5

Programming & Operation

Fan setting (auto/on)..................................6

System setting (heat/cool/auto)................7

Auto-changeover (heat/cool).....................8

Compressor protection..............................9

Appendices

Battery replacement ................................10

In case of difficulty...................................11

Customer assistance ...............................13

Accessories/replacement parts ..............13

5-year limited warranty............................14

Table of contents

CAUTION: EQUIPMENT DAMAGE

HAZARD. To prevent possible

compressor damage, do not operate

cooling system when outdoor

temperature is below 50°F (10°C).

About your new thermostat

Congratulations on the purchase of your new Honeywell thermostat. It has been

designed to give you many years of reliable service and easy-to-use, push-button

climate control.

Features

• One-touch temperature control.

• Large, clear, backlit display is easy to read—even in the dark.

• Displays both room temperature and temperature setting.

• Removable battery holder for fast, easy replacement.

• Built-in compressor protection.

Operating Manual

FocusPROTM TH5000 Series

This thermostat is ready to go!

Your new thermostat is pre-programmed by the installer and ready to use. Just check

the settings below and change if needed:

1. Fan (Auto/On): Preset to Auto.........................................To change, see page 6.

Auto is the most commonly used setting, but you may

prefer On for improved air circulation.

2. System (Heat/Cool/Auto/Em. Heat): Preset to Heat ...To change, see page 7.

You can select heating or cooling, or set the system

to control both systems automatically, if needed.

Operating Manual

Digital display (see page 5) Battery holder (see page 10)

Temperature Buttons

Press to set preferred

temperature.

Function Buttons

Press to select the function displayed just above each

button. (Functions change depending on the task.)

Quick reference to controls

FocusPROTM TH5000 Series

Current inside

temperature

Auxiliary

Heat On

Heat

Setting

Inside

Replace

Battery

Auto

Fan

Heat

System

Function buttons

Press the button beneath each function to view or change

settings (functions change depending on the task)

Low battery warning (see page 10)

Temperature

setting

System status

Heat On/Cool On

(If flashing, see page 9)

System setting

Heat/Cool/Auto/Off/

Em Heat (see page 7)

Fan setting

Auto/On (see page 6)

Quick reference to display screen

Auxiliary heat (Only for heat

pumps with auxiliary heat)

Operating Manual

Press the &!.button to select Auto or On.

In “Auto” mode (the most commonly used

setting), the fan runs only when the heating

or cooling system is on. If set to “On,” the

fan runs continuously. Use this setting for

improved air circulation, or for more

efficient air cleaning.

Heat

System

Auto

Fan

Heat

System

Fan

Select the fan setting

FocusPROTM TH5000 Series

Press the 3934%-button to select:

• Heat: Thermostat controls only the

heating system.

• Cool: Thermostat controls only the

cooling system.

• Off: Heating and cooling systems are off.

• Auto: Thermostat automatically selects

heating or cooling depending on the

indoor temperature.

• Em Heat (only for heat pumps with

auxiliary heat): Thermostat controls

Emergency and Auxiliary Heat.

Compressor is locked out.

Select the system setting

Heat

System

Auto

Fan

Cool

System

Auto

Fan

Note: The Auto and Em Heat

system settings may not

appear, depending on how

your thermostat was installed.

Operating Manual

Auto Changeover is a feature used in climates

where both air conditioning and heating are

used on the same day. When the system is set

to Auto, the thermostat automatically selects

heating or cooling depending on the indoor

temperature.

Heat and cool settings must be at least 3

degrees apart. The thermostat will automati-

cally adjust settings to maintain this 3-degree

separation (called “deadband”).

The 3-degree separation between heating and

cooling set temperatures is fixed, and cannot

be changed.

Auto changeover (heat/cool)

Auto

System

Auto

Fan

Press until screen

displays “Auto”

Note: The Auto system setting

may not appear, depending on

how your thermostat was installed.

Otros manuales para FocusPRO TH5000 Series

Tabla de contenidos

Otros manuales de Termostato de Honeywell

Honeywell

Honeywell FocusPRO TH5320R01 Manual de usuario

Honeywell

Honeywell Evohome Manual de usuario

Honeywell

Honeywell MagicStat CT2400 Manual de usuario

Honeywell

Honeywell TH2110 Manual de usuario

Honeywell

Honeywell INTELLIGUARD 9000 Manual de usuario

Honeywell

Honeywell Wi-Fi Thermostat 9000 Manual de usuario

Honeywell

Honeywell CT62A Manual de usuario

Honeywell

Honeywell RTH9590 Manual de usuario

Honeywell

Honeywell RLV431 Manual de usuario

Honeywell

Honeywell T7516A Manual de usuario

Honeywell

Honeywell PRO 3000 Manual de usuario

Honeywell

Honeywell T834C Manual de usuario

Honeywell

Honeywell FocusPRO TH6220D Manual de usuario

Honeywell

Honeywell RTH4300B1000 Manual de usuario

Honeywell

Honeywell RTH5100B Manual de usuario

Honeywell

Honeywell TB7300A5014B Manual de usuario

Honeywell

Honeywell MagicStat T8132 Manual de usuario

Honeywell

Honeywell RTH9600WF Manual de usuario

Honeywell

Honeywell CT62A Manual de usuario

Honeywell

Honeywell DT70 Series Manual de usuario

Honeywell

Honeywell RTH2300 series Manual de usuario

Honeywell

Honeywell RTH8500 Series Manual de usuario

Honeywell

Honeywell MagicStat CT3300 Guía del usuario

Honeywell

Honeywell CT8602C Manual de usuario

Manuales populares de Termostato de otras marcas

EWELLY

EWELLY EW-181 Manual de usuario

Prolon

Prolon T1100 Instrucciones de instalación

Computherm

Computherm Q20 Manual de usuario

Heatmiser

Heatmiser neoStat Manual de usuario

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario

Saswell

Saswell SAS920XWHB-7-S-RF Guía

Aircalo

Aircalo TFP1-ET85P2 Manual de usuario

Carrier

Carrier DEBONAIR 33CS Manual de usuario

Lennox

Lennox iHarmony Zone Thermostat Instrucciones de montaje

Gemtech

Gemtech GT7000 Manual de instrucciones

Rollei

Rollei Smartes 45000 Manual de usuario

Sinope

Sinope TH1300RF Manual de usuario

NuTone

NuTone NTBZ48 Instrucciones de funcionamiento originales

Stelpro

Stelpro MAESTRO ASMT402AD Manual de usuario

Aube Technologies

Aube Technologies TH305 Manual de usuario

Powtier Controls

Powtier Controls 505MST Manual de usuario

Kanmor

Kanmor Zone Control 369e Manual de usuario