Honeywell HCD95534 Manual de usuario

User Guide

HCD95534 HCD95534X

NTSC PAL

HCD95534

True Day/Night

IR Camera

Document 800-01802 – Rev B – 02/09

Revisions

Issue Date Revisions

A 11/08 New document

B 02/09 Corrected illumination length to 125-150

ft (40 - 46 m).

Document 800-01802 Rev B 3

02/09

Warnings

Installation and servicing should be performed only by qualified and

experienced personnel to conform to all local codes and to maintain your

warranty.

WARNING! 12 VDC/24 VAC models require the use of CSA

Certified/UL Listed Class 2 power adapters to ensure

compliance with electrical safety standards.

Changes or modifications not expressly approved by

the manufacturer could void the user’s authority to

operate the equipment.

Caution To prevent electric shock and risk of fire hazards do not

use power sources other than that specified.

Explanation of Graphical Symbols

RISK OF ELECTRIC

SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE THE COVER.

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL

THIS SYMBOL INDICATES THAT

DANGEROUS VOLTAGE

CONSTITUTING A RISK OF

ELECTRIC SHOCK IS PRESENT

WITHIN THE UNIT.

THIS SYMBOL INDICATES THAT

IMPORTANT OPERATING AND

MAINTENANCE INSTRUCTIONS

ACCOMPANY THIS UNIT.

CAUTION

FCC Compliance Statement

Information to the User: This equipment has been tested and found to

comply with the limits for a Class A digital device. Pursuant to Part 15 of the

FCC Rules, these limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be required to correct

the interference at his own expense.

Caution Changes or modifications not expressly approved by

the party responsible for compliance could void the

user’s authority to operate the equipment.

Manufacturer’s Declaration of Conformance

The manufacturer declares that the equipment supplied with this guide is

compliant with the essential protection requirements of the EMC directive

2004/108/EC and the Low Voltage Directive LVD 2006/95/EC, conforming to

the requirements of standards EN 55022 for emissions, EN50130-4 for

immunity, and EN 60950 for Electrical Equipment safety.

Document 800-01802 Rev B 5

02/09

Important Safety Information

• Read and keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with dry cloth.

• Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

• Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus.

Precautions

• Please ensure that your installation area can support the weight of the

camera.

• Do not install the camera in extreme temperature conditions. Only use

the camera where temperatures are between -13°F and 122°F (-25°C

and 50°C). Be especially careful to provide ventilation when operating

under high temperatures.

• Do not aim the camera towards an extreme light source to prevent

damaging the CCD.

• Do not touch the camera bezel (front glass plate).

• Do not drop the camera or subject it to physical shock.

• Do not expose the camera to radioactivity.

• Do not use a strong or abrasive detergent when cleaning the camera.

Caution The light emitted from the near-infrared light emitting

diodes (LEDs) provides illumination over a wide area.

This light is not considered a risk to the unshielded

human eye. However, as with any light source, it is

recommended that normal precautions be taken to

avoid unnecessary exposure. For example, avoid

staring into the beam or viewing directly with optical

instruments at close range.

Note IR LEDs could be warm after prolonged use.

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Unpack Everything . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Attaching the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Positioning the Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Lens Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Adjusting the Zoom and Focus of the Lens . . . . . . . . . . . . . . . . . . 9

Camera Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Camera Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Connecting the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Setup Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

SETUP Menu Functions . . . . . . . . . . . . . . . . . . . . . . . . . 12

SPECIAL Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

SPECIAL Menu Functions. . . . . . . . . . . . . . . . . . . . . . . . 14

Adding a Camera Title Display . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Configuring Sync Control/Line-lock . . . . . . . . . . . . . . . . . . . . . . . 16

Setting Up Motion Detection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Configuring Privacy Zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Warranty and Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Mounting Template . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Document 800-01802 Rev B 7

02/09

Introduction

The Honeywell HCD95534 Color IR camera is designed for exceptional value

and performance and is ideally suited for use in day-to-day surveillance

applications. The off-the-shelf feature set is designed for high picture quality

in standard applications and the HCD95534 requires little to no adjustment

after installation.

Figure 1 Camera Overview

Features

• High resolution 530 TVL 1/3” CCD provides a high-quality picture in low-

light conditions

• 26 IR LEDs for illumination up to 125~150 ft. (40~47 m) depending on

scene reflectivity, DSS on

•5

–50 mm F1.6 IR corrected Vari-focal lens with external controls for

zoom and focus

• External access for camera On-screen Display (OSD) menu and day

night threshold controls

• Digital Noise Reduction (DNR) minimizes video noise in low light

• Digital Slow Shutter (DSS) for improved light sensitivity to extend the

range of the light that the camera can detect in low-light conditions

• Automatic day/night switching with adjustable threshold level control

• 12 VDC or 24 VAC operation

Sunshield

Lens adjustment

Camera settings

(behind access cover)

Mounting bracket

IR LED

5–50 mm IR

corrected

vari-focal lens

Photo cell

Before You Begin

Unpack Everything

Check that the items received match those listed on the order form and

packing slip. The HCD95534 packing box should include, in addition to this

User Guide:

• One HCD95534 camera

• Four mounting screws

• One video test cable

• One allen wrench

• One adapter plate for 4S mounting box

If any parts are missing or damaged, contact the dealer you purchased the

camera from or call Honeywell Customer Service (see the back of this

manual).

Note A Phillips screwdriver and a flathead screwdriver may assist your

installation.

Installation

The HCD95534 camera is designed for installation on a wall or ceiling. The

HCD95534 is weather sealed for indoor or outdoor locations.

Attaching the Camera

1. Position the camera to the desired mounting location on a wall or ceiling.

Be sure the location is solid on a flat, smooth surface (for example, a

crossbeam).

2. Using the supplied mounting template, mark the four screw holes for

installation.

3. Using four screws appropriate to your installation, mount the camera at

the marked holes.

The mounting bracket can be separated from the camera housing for

easier installation. This is done by unscrewing and removing the thumb

screw on the bracket. Replace and tighten the thumb screw after

installation is complete.

Document 800-01802 Rev B 9

02/09

Note To ensure a waterproof installation, the notch in the camera base

that the power and video connections exit through should be facing

down.

If the power and video connections exit the top of the base (wall

mounted only), water may pool in the camera base. To minimize

moisture entering the base, apply appropriate sealant around the

notches and any other gaps between the camera base and the

mounting surface.

Positioning the Camera

Caution Do not swivel and position the camera without the

mounting bracket firmly in place.

Loosen the thumb screws and move the camera into position. Swivel the

camera to capture the desired field of view. Tighten the thumb screws to set

the position.

Lens Setup

Adjusting the Zoom and Focus of the Lens

The zoom and focus adjustment is located on the underside front end of the

camera housing. Use a flathead screwdriver to adjust the zoom and/or focus.

Figure 2 Lens Controller

Zoom adjustment screw

Turn counter-clockwise for wide angle

Turn clockwise for telephoto

Focus adjustment screw

Turn counter-clockwise for near focus

Turn clockwise for far focus

Camera Settings

Camera Functions

Figure 3 Camera Controller

Legend

# Description

1Video-test monitor output connector

2LUX-level adjustment DIP switches. Only one switch should be on at a

time. They modify the point at which the lux threshold (level of light)

changes the mode of operation (color or B/W).

3LED-level adjustment screw. Increase (turn clockwise) or

lower (turn counter-clockwise) the IR LED brightness in night (B/W)

mode.

4Camera OSD control (four position plus center push)

LED-LEVEL

VIDEO-TEST

LUX LEVEL

DOWN

LEFT RIGHT

SETUP (MENU)

PUSH DOWN

1 STEP

2 STEP

3 STEP

4 STEP

STEP Color to B/W (LED on) B/W to Color (LED off)

1 11–12 lux 12–13 lux

2 8–9 lux 10–11 lux

3 6–7 lux 7–8 lux

4 1–3 lux 3–5 lux

Otros manuales para HCD95534

Tabla de contenidos

Otros manuales de Cámara de seguridad de Honeywell

Honeywell

Honeywell HCD484E Manual de usuario

Honeywell

Honeywell HD50 Manual de usuario

Honeywell

Honeywell HSD-361P Manual de usuario

Honeywell

Honeywell HBD9 Manual de usuario

Honeywell

Honeywell ACUIX ES Manual del operador

Honeywell

Honeywell HD262 Manual de usuario

Honeywell

Honeywell EXPTZ-252A Guía del producto

Honeywell

Honeywell HDZ30A Manual de usuario

Honeywell

Honeywell HD31H(X) Manual de usuario

Honeywell

Honeywell HD2FM1BX Manual de usuario

Honeywell

Honeywell HD60 Manual de usuario

Honeywell

Honeywell IPCAM-WIC1 Manual de usuario

Honeywell

Honeywell H34S-IC Manual de usuario

Honeywell

Honeywell HD3USX Manual de usuario

Honeywell

Honeywell equIP H2S1P6X Manual de usuario

Honeywell

Honeywell EQUIP HD4DIP Manual de usuario

Honeywell

Honeywell Lyric C1 Manual de usuario

Honeywell

Honeywell HD4UX Manual de usuario

Honeywell

Honeywell NEXH4520HD-NET Manual de usuario

Honeywell

Honeywell 60 Series Manual de usuario

Honeywell

Honeywell HD70 Series Manual de usuario

Honeywell

Honeywell 35 Series Manual de usuario

Honeywell

Honeywell 2450Cm Series Manual de usuario

Honeywell

Honeywell HCD484L Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario