Honeywell RAE Systems RAEPoint Manual de usuario

Honeywell® RAEPoint™

Multi-function Wireless Infrastructure Component

USER

MANUAL

Table of Contents

Special Servicing Note 4

Read Before Operating 5

General Information 6

Applications 7

RAEPoint Specifications 14

Physical Description 16

Physical Dimensions 16

Hardware Installation 17

Mounting 17

Instrument Disassembly 19

Instrument Reassembly 20

Wiring 21

RAEPoint Wiring 21

RAEPoint Wiring Procedure 22

DC Control Wiring 23

Switch Settings 23

Earth Grounding Instructions 26

Additional content 28

Display/User Interface 28

Alarm Signal Summary 28

RAEPoint Host 29

RAEPoint Remote 30

RAEPoint Router 30

RS485 Modbus® 31

Message Frame /Communication Procedure 32

Appendix A: Controlled Section 37

Scope 37

Responsibility 37

Contents 37

Models of RAEPoint 42

Honeywell®RAEPoint | User Manual 2

Honeywell® RAEPoint | User Manual 3

Technical Support 43

Contacts 43

Special Servicing Note

If the instrument needs to be serviced, contact either:

The Honeywell® distributor from whom the instrument was purchased; they will return the

instrument on your behalf.

Honeywell® Technical Service Department. Before returning the instrument for service or repair,

obtain a Returned Material Authorization (RMA) number for proper tracking of your equipment. This

number needs to be on all documentation and posted on the outside of the box in which the

instrument is returned for service or upgrade. Packages without RMA Numbers will be refused at

the factory.

Honeywell®RAEPoint | User Manual 4

Honeywell® RAEPoint | User Manual 5

Read Before Operating

This manual must be carefully read by all individuals who have or will have the responsibility of

using, maintaining, or servicing this product. The product will perform as designed only if it is used,

maintained, and serviced in accordance with the manufacturer’s instructions. The user should

understand how to set the correct parameters and interpret the obtained results.

CAUTION

To reduce the risk of electric shock, turn the power off before opening this instrument or

performing service. Never operate the instrument when the instrument is open. Use and service this

product only in an area known to be non-hazardous.

WARNING

For safety reasons, this equipment must be operated and serviced by qualified personnel only.

Read and understand instruction manual completely before operating or servicing.

AVERTISSEMENT

Pour des raisons de sécurité, cet équipment doit être utilisé, entretenu et réparé uniquement par un

personnel qualifié. Étudier le manuel d’instructions en entier avant d’utiliser, d’entretenir ou de

réparer l’équipement.

CHAPTER

1General Information

RAEPoint is an explosion-proof wireless device that both extends the range and enables remote

relay functionality across a wireless mesh network. As part of a wireless mesh network, the

RAEPoint communicates with wireless detectors and controllers and can direct any of its five

internal relays to trigger audible and visible alarms. Remote alarm notifications are critical for

many applications where local device alarms are simply not visible enough or loud enough to alert

a wide area. RAEPoint relay settings can be fully configured wirelessly via the system controller.

RAEPoint can also be configured as a wireless host, and communicate directly with detectors,

providing a localized alarm notification solution that does not require a controller.

Key Features

lFive internal SPDT relays (except in RAEPoint router)

lWireless transmission distance of 1000 ft (300m) line-of-sight and 4921 ft (1500m) for

LoRa. Range can be extended by using wireless routers.

lClass 1, Division 1, and IECEx/ATEX Zone 1 hazardous area certification

lExplosion-proof enclosure for hazardous environment applications

lLEDs indicate status

Applications

lOil and gas exploration

lRefineries and petrochemical plants

lFenceline monitoring

Proper Product Disposal at End of Life

EU Directive 2012/19/EU: Waste Electrical and Electronic Equipment (WEEE)

This symbol indicates that the product must not be disposed of as general industrial or

domestic waste. This product should be disposed of through suitable WEEE disposal

facilities. For more information about disposal of this product, contact your local authority,

distributor, or the manufacturer.

FCC Part 15 Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two

conditions:

Honeywell® RAEPoint | User Manual 6

1. This device does not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause

undesired operation.

Applications

The RAEPoint can be ordered as a stand-alone wireless unit, or as part of an integrated Wireless

Alarm Bar complete with 2 strobes and horn (Wireless Alarm Bar). Each RAEPoint can be

configured as a Router, Remote, or Host on a wireless mesh network.

Note: The Wireless Alarm Bars (AC and DC versions) used as examples in this manual do not conform to the same certifications

of the RAEPoint. Refer to the corresponding Wireless Alarm Bar manuals for product specific specifications.

RAEPoint Router

A stand-alone, DC-powered, explosion-proof unit that acts as a permanent wireless router for mesh

network systems. Includes aluminum enclosure with LED status indicators and an integrated

wireless mesh radio.

RAEPoint Remote & RAEPoint Host

Stand-alone relay units include aluminum enclosure with LED status indicators, an integrated

wireless mesh radio, and five integrated relays.

RAEPoint Remote Wireless Alarm Bar & RAEPoint Host Wireless Alarm Bar

Wireless alarm bar units include the RAEPoint fully integrated with 2 certified Xenon strobes and a

certified 112dB horn. Flame and PID sensors and third-party devices (using RS-485) can be also be

included.

RAEPoint WA-100 DC Alarm AC/DC Wireless Alarm Bar

Honeywell®RAEPoint | User Manual 7

Honeywell® RAEPoint | User Manual 8

Flexibility

RAEPoint can be used in large or small systems, and the network can be expanded or units

removed, depending on the facility or facilities being monitored.

Simple configurations that use MeshGuard sensors and a RAEPoint Wireless Alarm Bar host

Full network, including externally controlled devices (AC-Powered Alarm Bar configured as

Remote)

Full network, including externally controlled devices (DC-Powered Alarm Bar with RAEPoint

configured as Remote)

Honeywell®RAEPoint | User Manual 9

Honeywell® RAEPoint | User Manual 10

Flame detectors and PID sensors can be included in the network, as well as third-party devices

communicating with RS-485 Modbus® protocol

Note: With a 2.4 GHz modem, a RAEPoint Router can connect with 24 instruments with 3 hops and a maximum of 8 Routers.

Tabla de contenidos

Otros manuales de Enrutador de red de Honeywell

Honeywell

Honeywell MDENR100 Manual de usuario

Honeywell

Honeywell RedLINK THM6000R Manual de usuario

Honeywell

Honeywell Q7751A Manual de usuario

Honeywell

Honeywell 5210 Manual de usuario

Honeywell

Honeywell DCP 50 Manual de usuario

Honeywell

Honeywell Evohome Manual de usuario

Honeywell

Honeywell Q7751A Manual de usuario

Honeywell

Honeywell DC313XXHGP2/BS Manual de usuario

Honeywell

Honeywell SDC Manual de usuario

Honeywell

Honeywell ST799 Manual de usuario

Honeywell

Honeywell DHC 23 Manual de usuario

Honeywell

Honeywell WEB-645 Manual de usuario

Honeywell

Honeywell SDC 7-21 Manual de usuario

Honeywell

Honeywell HVC0001 Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad