Honeywell MPA2C3 Manual de usuario
Installation Manual
MPA2C3
Access Control Unit
2 MPA2C3 Installation Guide
MPA2C3 Installation Guide 3
TABLE OF CONTENTS
Chapter 1 - Introduction............................................................................... 11
Introduction................................................................................................................................... 11
Packing List............................................................................................................................. 11
Access Control Unit Overview.......................................................................................... 16
Compliance Note .................................................................................................................. 17
Chapter 2 - Access Control Panel Overview............................................. 21
Access Control Panel Wiring and Components........................................................ 22
LEDs and Button................................................................................................................... 24
Power Supply.......................................................................................................................... 26
Supervised and Non-Supervised Input Wiring ............................................................... 27
MPA2C3 Access Control Unit .......................................................................................... 29
Real-time Clock Protection............................................................................................... 30
Chapter 3 - Wiring the Panel and Devices................................................. 27
Shutting down and Restart the Panel .......................................................................... 27
System Wiring Overview..................................................................................................... 28
Wiring the Door Peripherals ............................................................................................. 37
MPA2C3 2-door system reader configurations....................................................... 44
Wiegand mode panel setting.................................................................................................. 45
OSDP mode panel setting................................................................................................. 46
Wiring Readers....................................................................................................................... 48
Power limitations for the reader connections ........................................................... 49
External reader power......................................................................................................... 49
Wiegand Reader Wiring...................................................................................................... 52
4 MPA2C3 installation Guide
OSDP Bus termination........................................................................................................55
OSDP EOL Termination in 2 - Door Panel...................................................................56
OSDP EOL termination in 4-door panels ....................................................................58
OSDP ADDRESSING VIA PANEL .....................................................................................59
OSDP READER ADDRESS ASSIGNMENT FEATURE VIA PANEL .......................60
OSDP reader controls..........................................................................................................60
OSDP READER ADDRESS ASSIGNMENT FEATURE VIA PANEL .......................61
Address assignment procedure for OSDP readers ..................................................61
Correcting/Editing Reader Address ..............................................................................63
Option 1: Connect reader with highest address first. .............................................66
Option 2: reset all reader and reassign all one by one ...........................................67
Wiring Input/Output Devices of Doors ..............................................................................71
Red RJ45 Door terminals ...................................................................................................87
DIP Switch Settings........................................................................................................... 101
Jumper Settings.................................................................................................................. 104
Communications................................................................................................................ 107
Configuring FACP input functionality ....................................................................... 112
FACP input functionality ................................................................................................. 112
Door Access Modes ........................................................................................................... 113
Door access mode indication ........................................................................................ 114
FACP input prerequisites ................................................................................................ 117
FACP input set up procedure – FAIL-SAFE INSTALLATION ............................. 118
Connect the Fire Panel’s output wiring to the FACP input................................ 121
FACP input activation in Alarm – Notifications..................................................... 124
Chapter 4 - Mounting the Enclosure........................................................125
Metal Enclosure Installation................................................................................................ 125
Wiring the AC Power Cord............................................................................................... 126
Mounting the Enclosure ........................................................................................................ 129
Chapter 5 - System Configuration............................................................135
System Configuration....................................................................................................... 135
Ethernet – Network Dedicated to Access Control ................................................. 136
USB Connection ................................................................................................................. 137
MPA2C3 Installation Manual 5
RS-485 Loop Connection via MPA2C3......................................................................138
Ethernet Virtual Loop with All Panels on Common IP Subnet .........................139
Ethernet Virtual Loop – Network Dedicated to Access Control .......................140
Ethernet Connection with Ethernet Virtual Loop – Multiple Locations.......141
Chapter 6 - Hardware Specifications .......................................................143
Feature list MPA2C3 2-door panel..............................................................................143
Feature list MPA2C3 4-door panel..............................................................................147
Maximum Output Loading of Power Supply ...........................................................150
PoE+ Power Limitations...................................................................................................151
Battery Supply......................................................................................................................153
Cables......................................................................................................................................154
Enclosure Label and Symbols EU:EMC/CE...................................................................165
Panel Settings ............................................................................................................................167
Chapter 7 - Firmware Specification..........................................................167
Panel Settings.......................................................................................................................167
Firmware Upgrades ...........................................................................................................168
4-door License.....................................................................................................................168
Basic Standalone Operation.................................................................................................168
Door Egress (REX) / Door Lock / Door Status Operation...................................168
Chapter 8 - Maintenance............................................................................169
Chapter 9 - Troubleshooting......................................................................171
Chapter 10 - Appendix ................................................................................173
Main setting configuration under UL testing................................................................175
Primary input........................................................................................................................175
Secondary Input..................................................................................................................175
Powered Output ..................................................................................................................175
Dry contact Output ............................................................................................................176
6 MPA2C3 installation Guide
MPA2C3 Installation Guide 5
Copyright © 2022 Honeywell. All rights reserved.
All product and brand names are the service marks, trademarks, registered trade-
marks, or registered service marks of their respective owners. Honeywell reserves
the right to change any information in this document at any time without prior
notice.
Ordering Information
Please contact your local Honeywell representative or visit us on the web at https://
www.security.honeywell.de or information about ordering.
Feedback
Honeywell appreciates your comments about this manual. Please visit us on the
web athttps://www.security.honeywell.de to post your comments.
Digital Manuals and manuals in other languages
Honeywell provides this manual in English and other languages Online:
Get Online Document Here
The link is also found by scanning the following QR code.
6 MPA2C3 Installation Guide
MPA2C3 Installation Guide 7
WARNING Installation and servicing should be performed only by qualified and
experienced technicians to conform to all local codes and to maintain your war-
ranty.
Regulatory Statements
Waste Electrical and Electronic Equipment (WEEE)
Correct Disposal of this Product (applicable in the European Union and other
European countries with separate collection systems).
This product should be disposed of, at the end of its useful life, as per applicable
local laws, regulations, and procedures.
INSTALLATION
Install in accordance with the manufacturer’s instructions.
Installation and servicing should be performed only by qualified and experienced
technicians to conform to all local codes and to maintain your warranty.
POWER SOURCES - This product should be operated only from the type of power
source indicated in the guide. If you are not sure of the type of power supplied to
your facility, consult your product dealer or local power company.
MOUNTING SYSTEM - Use only with a mounting system recommended by the
manufacturer, or sold with the product.
ATTACHMENTS/ACCESSORIES - Do not use attachments/accessories not recom-
mended by the product manufacturer as they may result in the risk of fire, electric
shock, or injury to persons.
SERVICING - Do not attempt to service this unit yourself. Refer all servicing to
qualified service personnel.
REPLACEMENT PARTS - When replacement parts are required, be sure the service
technician has used replacement parts specified by the manufacturer or have the
same characteristics as the original part. Unauthorized substitutions may result in
fire, electric shock or other hazards. Using replacement parts or accessories other
than the original manufacturers may invalidate the warranty.
8 MPA2C3 Installation Guide
Warranty and Service
Subject to the terms and conditions listed on the product warranty, during the war-
ranty period Honeywell will repair or replace, at its sole option, free of charge, any
defective products returned prepaid.
Be sure to have the model number, serial number, and the nature of the problem
available for the technical service representative.
Prior authorization must be obtained for all returns, exchanges, or credits. Items
shipped to Honeywell without a clearly identified Return Merchandise Authoriza-
tion (RMA) number may be refused.
Safety Notes
Read the instructions carefully and thoroughly before installing the device and
putting it into operation.
They contain important information on installation, reprogramming and operation.
The device is a state-of-the-art product. Only use the device:
• In accordance with regulations,
• When it is has been installed and is functioning correctly,
• In accordance with technical data
The manufacturer is not responsible for damage that is caused by use not in accor-
dance with regulations.
Installation and programming as well as maintenance and repair work may only be
carried out by skilled, authorized personnel.
De-energize the entire system before soldering and connecting.
Carry out soldering work with a temperature-controlled electrically isolated solder-
ing iron.
To avoid a short circuit with battery, Use isolated tools for installation and service.
Do not use the device in a potentially explosive environment or in rooms where
metal or plastic decomposing vapours are emitted.
ATTENTION! Important security notes to dangerous voltage operation
•(Voltages >= 42,4 V peak value or >= 60 V DC, e.g. also 230 V AC).
•Work on primary voltage should only be carried out by skilled, authorized personnel.
• Only connect units as per IEC EN 62368-1 to the module.
• Appropriate overload protection must be provided in the mains circuit.
For installation an appropriate mains separator is required.
• Switch off the primary circuit before carrying out installation or maintenance
work.
• Only cables with double insulation may be used. e.g. NYM, NYM, H05VV, H05RR
or similar cables.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Controladores de acceso IP de Honeywell
Honeywell
Honeywell NetAXS-123 Manual de usuario
Honeywell
Honeywell MPA1 Manual de usuario
Honeywell
Honeywell MPA1C1 Manual de usuario
Honeywell
Honeywell MPA2 Manual de usuario
Honeywell
Honeywell IDENT-KEY 3 Manual de instrucciones
Honeywell
Honeywell ACS-8 Manual de usuario
Honeywell
Honeywell VISTA CA-FP-100F Manual de usuario
Honeywell
Honeywell OmniAssure Touch Mullion Manual de usuario
Honeywell
Honeywell NetAXS-123 Manual de usuario
Honeywell
Honeywell Tema-Voyager Compact Manual de usuario
