Honeywell V4044C Manual de operación

V4044C, V4044F

Motorized Zone Valves

3-PORT HYDRONIC VALVES

Design

V4044C and V4044F zone valves consist of:

•3-way valve housing with BSPP internal threads

•Control ball assembly

•Actuator assembly with cable

•V4044F1000 with SPDT end switch

•V4044F1034 with SPST end switch

Materials

•Valve housing made of forged brass

•Spindle shaft made of brass

•O-ring seals made of EPDM rubber

•Ball plug made of NBR rubber

•Actuator cover and base made of zinc-plated steel

Application

Honeywell V4044C and F 3-port hydronic valves are used in

domestic and small commercial heating and cooling

applications to control the flow of hot or cold water.

They are designed for on-off zone control of domestic sys-

tems and can be used to control individual fan coil, radiator,

space heater or convector applications. They can be con-

trolled by a line voltage SPST controller such as a room

thermostat, aquastat or flow switch.

The actuator head is removable without affecting the integrity

of the water system.

Features

•Rugged design

•Control by a line voltage SPST controller

•Actuator head installation does not require draining of

the system

•High flow rate capacity

•Indifferent to dirt in system

Specifications

Medium Water or water-glycol mixture

(max. 50% glycol content),

quality to VDI 2035

pH-value 8...9.5

Operating temperature 5...88°C (41...190°F)

Ambient temperature max. 50°C (122°F)

Operating pressure max. 8.6 bar (125 psi) static

Differential pressure see chapter “Dimensions” below

kvs (cv)-values see chapter “Dimensions” below

Flow AB →A or B

Starting position port A normally closed

Voltage 220-240V, 50Hz

Power consumption 6W / 0.042A

Auxiliary switch rating 2.2A at 230Vac, 50Hz

Nominal timing On: 30 seconds under power

Off: 12 seconds under spring

return

Electrical termination 1m flying lead, heat resistant

cable

Shipping temperature -40…65°C (-40…149°F)

Humidity rating 5…95% RH (non-condensing)

Atmosphere non-corrosive, non-explosive

PRODUCT DATA

V4044C, V4044F

Function

V4044C and V4044F 2-position hydronic valves are used in

domestic and small commercial applications to control the

flow of hot or cold water. They consist of an actuator and a

valve.

With the manual opener set to AUTO and the actuator

energized, port A of the valve is opened and port B is closed.

When the actuator is de-energized, a spring-return

mechanism drives the ball to close port A, opening port B.

Port A can also be opened with no electrical power by moving

the manual opening lever over the stop and pushing slowly

and firmly to the MAN. OPEN position. The stop permits the

valve to be locked with port A in the open position. The valve

returns to the automatic position when the valve is energized.

A power failure will leave the valve at the spring-returned

position. When power is restored, the valve will respond to

controller demand.

Fig. 1. V4044C/F in

energized position (AB-A)

Fig. 2. V4044C/F in de-

energized position (AB-B)

NOTE: Port AB is always open

Wiring

Fig. 3. Wiring diagram for V4044C Fig. 4. Wiring diagram for

V4044F1034

Fig. 5. Wiring diagram for

V4044F1000

Table 1. Cable colour coding

a b c d e h

brown blue green/yellow orange grey white

NOTE: The V4044C has no end switch. It is equipped with a 3 wire cable (line, neutral, earth)

The V4044F1034 has an SPST end switch. It is equipped with a 5-wire cable (line, neutral, earth, end switch). The end

switch closes when the valve is in position AB – B

The V4044F1000 has an SPDT end switch. It is equipped with a 6-wire cable (line, neutral, earth, end switch NO, end

switch NC)

The length of all cables is 1m

V4044C, V4044F

Dimensions

Fig. 6. V4044C, V4044F 3-way zone valve

Table 2. Main dimensions and other values

DimensionsBody kvs-value max. close-

off pressure R L C H

1/2” BSPP (internal) 3.0 1.4 bar 1/2” 96 46 128

3/4” BSPP (internal) 6.0 0.7 bar 3/4” 96 46 128

1” BSPP (internal) 8.1 0.55 bar 1” 96 46 128

3/4” BSPP (internal) 6.0 0.7 bar 3/4” 96 46 128

1” BSPP (internal) 8.1 0.55 bar 1” 96 46 128

NOTE: All dimensions in mm if not otherwise stated

Ordering Information

Table 3. Order information and OS-Nos. (OS=Ordering System)

Order text Size End switch Packing unit OS-No.

1/2” — 1 pc V4044C1452

3/4” — 1 pc V4044C1460

V4044C motorized zone valve

1” — 1 pc V4044C1478

3/4” SPST 1 pc V4044F1000

V4044F motorized zone valve with end

switch 1” SPDT 1 pc V4044F1034

3/4” SPST 10 pcs V4044F1000B

V4044F motorized zone valve with end

switch – bulk pack of 10 1” SPDT 10 pcs V4044F1034B

NOTE: Valves in bulk packs are not packed individually. Only one installation and operating instruction is supplied with the

bulk pack.

V4044C, V4044F

ACS Control Products

Honeywell GmbH

Hardhofweg

74821 Mosbach, Germany

Phone: +49 (6261) 810

Fax: +49 (6261) 81393

www.honeywell.com

EN0H-0325GE25 R0906

September 2006

Manufactured for and on behalf of the Environmental and Combustion

Controls Division of Honeywell Technologies Sàrl, Ecublens,

Route du Bois 37, Switzerland or by its Authorized Representative.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Unidad de control de Honeywell

Honeywell

Honeywell L91A Manual de operación

Honeywell

Honeywell FV300 Especificaciones técnicas

Honeywell

Honeywell Resideo ADEMCO 4101SN V-Plex Instrucciones de montaje

Honeywell

Honeywell BA298I-F Manual de usuario

Honeywell

Honeywell VR8200A Manual de usuario

Honeywell

Honeywell 7800 SERIES Manual de usuario

Honeywell

Honeywell EIM Guía de instalación

Honeywell

Honeywell PM7600B Manual de usuario

Honeywell

Honeywell SV2 Series Manual de usuario

Honeywell

Honeywell VP527A Manual de usuario

Honeywell

Honeywell BCU 460 Manual

Honeywell

Honeywell PFA 700 Manual

Honeywell

Honeywell TR120 Manual de usuario

Honeywell

Honeywell Braukmann DH300 Manual de usuario

Honeywell

Honeywell VR4300 Manual de usuario

Honeywell

Honeywell Ex-Or CDH4U5 Manual de instalación y operación

Honeywell

Honeywell TR80UWD Guía de instalación

Honeywell

Honeywell CGW-MB Manual de usuario

Honeywell

Honeywell 5496 Instrucciones de funcionamiento

Honeywell

Honeywell REDLINK ERM5220R Manual de operación

Honeywell

Honeywell Braukmann RV 284 Manual de usuario

Honeywell

Honeywell M6410A Manual de operación

Honeywell

Honeywell R7795A Manual de usuario

Honeywell

Honeywell PEHA 940 AMA Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario