Honeywell ScanDome ll HTX-3000 Manual de usuario

ScanDome ll™KEYBOARD CONTROLLER

Please read this manual thoroughly before use and keep it handy for future reference.

Rev.2 04/10/05

Instruction Manual

HTX-3000

WARNING AND CAUTION

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR

OTHER OPENINGS ON THE EQUIPMENT.

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to

alert the user to the presence of uninsulated "dangerous voltage" within the product's

enclosure that may be of sufficient magnitude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral triangle is intended to alert the user to the

presence of important operating and maintenance (servicing) instruction in the literature

WARNING

CAUTION

accompanying the product.

FCC COMPLIANCE STATEMENT

CE COMPLIANCE STATEMENT

FCC INFORMATION: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO

COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO

PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE

REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN

THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS

EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY

ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE

INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO RADIO

COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL

AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE

USER WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN

EXPENSE.

CAUTION: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY

THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S

AUTHORITY TO OPERATE THE EQUIPMENT.

THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.

CET APPAREIL NUMÉRIQUE DE LA CLASSE A EST CONFORME À LA NORME

NMB-003 DU CANADA.

WARNING

THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVIRONMENT THIS

PRODUCT MAY CAUSE RADIO INTERFERENCE IN WHICH CASE THE USER

MAY BE REQUIRED TO TAKE ADEQUATE MEASURES.

IMPORTANT SAFEGUARDS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that product heat.

9. Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other.

A grounding type plug has two blades and a third grounding prong.

The wide blade or the third prong is provided for your safety. If the

provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the

apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Unplug this apparatus during lightning storms or when unused for

long periods of time.

13. Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way, such as

power-supply cord or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has been

dropped.

14. CAUTION - THESE SERVICING INSTRUCTIONS ARE FOR USE BY

QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE

RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING

OTHER THAN THAT CONTAINED IN THE OPERATING

INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.

15. Use Certified/Listed Class 2 power supply transformer only.

16. Warranty does not cover the product damages caused by installation

carelessness or natural disaster such as lighting.

Table of Contents

Chapter 1.0 INTRODUCTION

1.1 Features ---------------------------------------------------------------------- 6

1.2 Unpacking ---------------------------------------------------------------------- 7

Chapter 2.0 INSTALLATION

2.1 Connection Diagram --------------------------------------------------------- 8

2.2 Termination & Dip Switch Setting ---------------------------------------- 12

2.3 Keyboard Setup -------------------------------------------------------------- 13

2.4 Master & Slave Keyboard Setting --------------------------------------- 15

Chapter 3.0 OPERATION

3.1 Keyboard Lock/Unlock ----------------------------------------------------- 16

3.2 Controlling Multiplexer ----------------------------------------------------- 16

3.3 Summary of Keyboard Control ------------------------------------------ 18

Appendix A Trouble Shooting ------------------------------------------------- 21

Appendix B SPECIFICATION ------------------------------------------------- 22

Chapter 1

INTRODUCITON

1.1 Features

This keyboard controller is capable to control 32 ScanDomeII™dome cameras and remote control

functions for variety of external switching devices like Multiplexer(max 255) etc…

The keyboard controller features:

•The capability of control a camera’s panning and tilting movement with variable speed from 0.5 °/sec

to 90°/sec as well as its zoom, focus, and iris command. Normal speed is inversely proportional to

the current zoom ratio. Turbo speed is Max 380°/sec when Ctrl key pressed.

•The ability to define and recall up to 240 presets, which are immediate camera call-ups of preset

position view, with automatic zoom and focus.

•The ability to define and run up to 8 patterns, which comprise a sequential series of pan, tilt, zoom,

and focus movements from a single camera.

•The ability to define and run up to 8 scans, which scan between two limits.

•The capability to incorporate up to 300 of the presets, patterns, scan and tour itself in up to 8 tours,

where the presets, patterns and scan automatically displayed one after the other on the Main monitor.

•Global preset recalls preset of all dome cameras.

•Auto Iris mode activated by moving the joystick slightly.

•Auto Focus mode is activated by twisting the zoom handle slightly.

•Programmable user preferences (alarm, preset, title, etc.).

•Administrator and user, two levels of password are supported for higher security.

•One Master and slave Keyboard is supported to control in a distant place.

•Multiplexers (Max 255) can be controlled remotely.

•Up to two programmed data from domes can be downloaded to none volatile memory space in KBD,

and uploads to a new dome.

Slave Keyboard

UP TO 32 CAMERA J-box

J-box

Master Keyboard

UP TO 255 MULTIPLEXER

<Siren>

UP TO 4

Output

Alarm

UP TO 8

Alarm Input

Figure 1 – Typical system Configuration

1.2 Unpacking

Unpack the equipment and make sure all listed items are included in the box.

Contents of Keyboard box

Keyboard controller ------------------------------- 1

Junction box --------------------------------------- 1

3m cable -------------------------------------------- 2

M4 Self tapping screws ------------------------- 4

Instruction manual --------------------------------- 1

12VDC SMPS & Power Cord ------------------- 1

Chapter 2

INSTALLATION

2.1 Connection Diagram

2.1.1 Basic Installation Diagram

3~4

5~8

1~2

1~4

ALARM OUTPUT

UP TO 4

ALARM OUTPUT ALARM OUTPUT

ALARM INPUT

HALF DUPLEX MODE : TX+,TX-

RS-485

ALARM INPUT

UP TO 8

ALARM INPUT

LIGHT

SIREN

SENSOR

DOME1 +

DOME1 -

AWG # 24

BNC

MONITOR

AC 24V

POWER

RX-(TX-)

RX+(TX+)

(RX-)

(RX+)

(RS-422)

RS-485

GND

(RX+)

AC-

AC+

FGND

(RX-)

AC-

RX+(TX+)

RX-(TX-)

AC+

NC2

NO2

NC1

NO1

COM2

COM1

AL4

GND

AL3

AL2

GND

AL1

NO4

NC4

COM4

NO3

NC3

COM3

GND

AL8

AL7

GND

AL6

AL5

AC 24V

POWER

RS-422

SIMPLEX MODE : TX+,TX-

DUPLEX MODE : TX+,TX-,RX+,RX-

Figure 2 – Basic installation diagram

2.1.2 Single Multiplexer

RS-485(-) PIN No.5

RS-485(+) PIN No.4

POWER

AC 24V

AL5

AL6

GND

AL7

AL8

GND

COM3

NC3

NO3

COM4

NC4

NO4

AL1

GND

AL2

AL3

GND

AL4

COM1

COM2

NO1

NC1

NO2

NC2

AC+

RX-(TX-)

RX+(TX+)

AC-

(RX-)

FGND

AC+

AC-

(RX+)

GND

RS-485

(RS-422)

(RX+)

(RX-)

RX+(TX+)

RX-(TX-)

AC 24V

POWERPOWER

AC 24V

BNC

MULTIPLEXER

SPOT MONITOR MAIN MONITOR

BNC

AWG # 24

Figure 3 – Single Multiplexer

2.1.3 Single User with Two Multiplexer

RS-485(+) PIN No.4

RS-485(-) PIN No.5

BNC

SPOT MONITOR 2ND MAIN MONITOR

2ND MULTIPLEXER

AWG # 24

BNC

1ST MAIN MONITOR

1ST MULTIPLEXER

BNC

AC 24V

POWER POWER

AC 24V

RX-(TX-)

RX+(TX+)

(RX-)

(RX+)

(RS-422)

RS-485

GND

(RX+)

AC-

AC+

FGND

(RX-)

AC-

RX+(TX+)

RX-(TX-)

AC+

NC2

NO2

NC1

NO1

COM2

COM1

AL4

GND

AL3

AL2

GND

AL1

NO4

NC4

COM4

NO3

NC3

COM3

GND

AL8

AL7

GND

AL6

AL5

AC 24V

POWER

Figure 4 – Two Multiplexer

Spot output of the first multiplexer to be

connected to 16th input of the second

multiplexer.

And first spot output of the 2nd multiplexer to

be connected to the spot monitor. You will see

the picture of the selected camera (1~31) on

spot monitor by selecti

ng camera

No.

Cam

Tabla de contenidos

Otros manuales de Unidad de control de Honeywell

Honeywell

Honeywell MasterLogic 50 Series Manual de usuario

Honeywell

Honeywell THP9045 Manual de usuario

Honeywell

Honeywell krom schroder BCU 440 Manual de usuario

Honeywell

Honeywell NOTIFIER LDM Series Manual de usuario

Honeywell

Honeywell VGF Manual de usuario

Honeywell

Honeywell ESSER IQ8MCP Manual de usuario

Honeywell

Honeywell Ex-Or CDH8U5 Manual de instalación y operación

Honeywell

Honeywell SUPER TRADELINE VR8300A Manual de usuario

Honeywell

Honeywell V4043A Manual de usuario

Honeywell

Honeywell Hometronic HAV 20 Guía

Honeywell

Honeywell RV280 Manual de usuario

Honeywell

Honeywell Pro-Watch 6000 Manual de usuario

Honeywell

Honeywell MI-DCZME Manual de usuario

Honeywell

Honeywell S4560B1006 Manual de usuario

Honeywell

Honeywell DR 300 Manual de usuario

Honeywell

Honeywell IDENT KEY 3 Manual de usuario

Honeywell

Honeywell 7800 SERIES Manual de usuario

Honeywell

Honeywell NOTIFIER XP10-M Manual de usuario

Honeywell

Honeywell 7800 SERIES Manual de operación

Honeywell

Honeywell Ex-Or MLSUC500 Manual de usuario

Honeywell

Honeywell SG150 Manual de usuario

Honeywell

Honeywell S8921D Manual de usuario

Honeywell

Honeywell Maxon SMA11 Manual de usuario

Honeywell

Honeywell SLATE R8001S9001 Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario