Honeywell Hometronic HB 05 Manual de usuario

Sun Module

HB 05 / HB 15

Mounting and Operation

Contents

Contents 1

Overview 2

For your information 2

Application 2

Scope of supply 4

Mounting 5

Safety instructions 5

Information on mounting the sun module 5

Information on mounting external sensors 6

Mounting the sun module 7

Inserting batteries 8

Mounting external sensors 9

Teach-in 12

Operation 16

Information for the fitter 16

Glossary 17

Technical data 18

Help for problems 19

Notes 21

Overview

For your information

Technical terms are identified by an * and are explained in the

glossary.

Application

The Sun module HB 05/HB 15 is part of the Hometronic System*. It

measures the brightness and temperature outside a building. The

housing of the sun module contains:

•1 sensor for measuring the brightness

•1 sensor for measuring the temperature

The measuring data* are transferred by radio to the Hometronic

Manager*. These data are used by the Hometronic Manager to control

the shutters which are assigned to the sun module via the following

functions:

•Opening the shutters at sunrise (SR)

•Sun protection (SP) in case of intensive sunshine and depending on

the outside temperature

•Closing the shutters at sunset (SS)

•Automatic brightness control (HA) for controlling the lamp

brightness via brightness values of the HB 05/HB 15 or controlling a

device with the device switch HS 20 or HS 30.

Overview

•In the case of Version HB 15 with a connected vane anemometer*:

Opening or closing the shutters depending on the wind forces (wind

protection*)

Use the wind sensor HWS 40 to control the awnings.

You can connect further external sensors to the sun module:

•A temperature sensor to the HB 05 (alternatively to the temperature

sensor in the housing)

•A temperature sensor and a vane anemometer to the HB 15

Overview

Scope of supply

(1) Sun module

(2) Mounting bracket

(3) 2 batteries 1.5 V, type LR 06

(mignon)

Additionally in the Sun

module HB 15 scope of suppl

(4) Connection cable (HCV 23)

(5) Vane anemometer

Mounting

Safety instructions

Caution!

The sun module has a radio transmitter whose function

can be impaired by metallic objects or radio devices.

►When selecting the mounting site, ensure that there is

sufficient distance to metallic objects and radio

devices.

►Select a different mounting site if radio interference

occurs.

Caution!

The brightness and temperature sensors in the inside of

the module have been adapted to the housing state.

►Do not coat the housing.

►Avoid rough damage to the housing.

Information on mounting the sun module

When selecting the mounting site, ensure that ...

•the sun module is easily accessible for the teach in* and the battery

change

•the brightness situation at the building is determined unimpaired as

far as possible

Mounting

If you only install one sun module, select the mounting site in

accordance with its main application: Your Hometronic Manager uses

the measured data to control e.g. the position of the shutters at

sunrise or sunset. For measured data ...

•at sunrise: Align the sun module to face East

•at sunset: Align the sun module to face West

•for the whole day: Align the sun module to face South

Information on mounting external sensors

In order to connect external sensors you require:

(1), (2) Cable from the distribution box to the external sensors

(3) Damp-proof distribution box

(4) Connection cable (HCV 23) to the sun module

Mounting

When selecting the mounting site, ensure that ...

•the function of the external sensors is not impaired by an unsuitable

mounting site

•the external temperature sensor is not subject to direct sun

irradiation

•the wind conditions at the vane anemometer correspond to those at

the assigned shutters

•the vane anemometer is not positioned sheltered from the wind

Mounting the sun module

1. Mounting the mounting bracket

The metallic mounting bracket supports the function of the radio

transmitter.

When mounting the unit, ensure that the horizontal screw

hole of the mounting bracket is positioned at the top.

►Select a suitable mounting site.

►Use suitable screws and dowels to fasten the

mounting bracket firmly to the underground.

Mounting

Inserting batteries

►If necessary, take the sun module out

of the mounting bracket.

►Open the battery compartment:

–Press in the battery lid.

–Pull up the housing frame.

–Remove the battery lid.

►Remove the old batteries, if necessa-

ry.

Batteries should not be disposed of in the household garbage.

You may be required by local law to dispose of used batteries

in a certain manner.

►Dispose of used batteries in conformance with the local statutory

requirements.

Always replace both batteries.

Only use 1.5 V mignon batteries of the type LR06.

►Insert the batteries into the battery compartment. Ensure that the

polarity is correct!

►Close the battery compartment and insert the sun module into the

mounting bracket.

Mounting of the sun module is now complete.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Unidad de control de Honeywell

Honeywell

Honeywell RV280 Manual de usuario

Honeywell

Honeywell SLATE R8001S9001 Manual de usuario

Honeywell

Honeywell HON 530-E-WG Guía

Honeywell

Honeywell XW100 Manual de usuario

Honeywell

Honeywell T7460B Manual de usuario

Honeywell

Honeywell VC7900 Series Manual de operación

Honeywell

Honeywell Hometronic HAV 20 Guía

Honeywell

Honeywell SOMAT39 Manual de usuario

Honeywell

Honeywell Aquastat L4006 Manual de usuario

Honeywell

Honeywell Esser IQ8TAL Manual de usuario

Honeywell

Honeywell SM120 Manual de usuario

Honeywell

Honeywell NOTIFIER LDM Series Manual de usuario

Honeywell

Honeywell ADEMCO 4229 Instrucciones de montaje

Honeywell

Honeywell PWT-BV Manual de operación

Honeywell

Honeywell DR 300 Manual de usuario

Honeywell

Honeywell KT73 Manual de usuario

Honeywell

Honeywell EXCEL CARE 5000 Manual de usuario

Honeywell

Honeywell S7800A1167 Manual de usuario

Honeywell

Honeywell V5852A Manual de servicio

Honeywell

Honeywell NK295C Manual de usuario

Honeywell

Honeywell Esser 2 Series Manual de usuario

Honeywell

Honeywell RM7800L1087 Manual de usuario

Honeywell

Honeywell NOTIFIER FW-MM Manual de usuario

Honeywell

Honeywell MV300 Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario