Honeywell WEB-O3022H Manual de operación

CIPer EXPIO Modules

PRODUCT DATA

APPLICATION

The WEB-O3022H and WEB-O9056H are Expansion

I/O modules that are exclusively utilized with the CIPer

Model 30 Controller (either WEB-C3036EPVBNH or

WEB-C3036EPUBNH).

They can be directly connected to the CIPer Model 30

Controller or remotely mounted up to 100’ away.

Multiple Expansion I/O Modules can be connected to a

single CIPer Model 30 Controller. You can mix the small

WEB-O3022H and the large WEB-CO9056H in any

combination to meet specific project I/O requirements.

The CIPer Model 30 Expansion I/O modules feature

removable terminal blocks, Hand-Off-Auto switches and

indicator LEDs and can be powered by the CIPer Model

30 Controller.

Features

•

Plug-and-play functionality for each installation and

maintenance.

•

All wiring connections are made to removable terminal

blocks to simplify device installation and replacement.

•

Wide range of sensors supported sensors like 20KNTC,

PT1000 and other resistive sensors.

•

Multiple Expansion I/O capability support and 300

additional points. Refer to CIPer Model 30 technical

documentation and SRB for more details.

•

16-bit A/D conversion resolution for accurate

measurement.

•

Indication LEDs for all Digital and Analog Outputs (DO

& AO).

•

HOA (Hand-Off-Auto) switches on DOs and AOs. HOA

are configurable and can be monitored.

•

Compact size for small installation housings.

•

Field configurable and programmable for control, input,

and output functions using the Niagara Framework®

based CIPer Model 30 programming tool.

CIPer MODEL 30 EXP I/O MODULES - PRODUCT DATA

31-00239EFS-01 2

Description

The WEB-O9056H module is a large expansion module which adds 20 additional I/O points, and the

WEB-O3022H module is a small expansion module which adds 7 additional I/O points. Multiple

expansion I/O modules can be added to a controller. Both I/O modules use the side-mounted terminal

port to connect with the CIPer Model 30 Controller and additional I/O modules.

Ordering part numbers

Table 1. Ordering part numbers

OS Number

(SKU)

Description

(Universal

Input)

UI/AO

(Universal

Input/Analog

Output)

(Digital

Output)

WEB-O9056H

Large Expansion Module, 20 Mixed I/O

WEB-O3022H

Small Expansion Module, 7 Mixed I/O

WEB-O3022H Dimensions

WEB-O9056H Dimensions

Figure 2. WEB-O9056H

Figure 1. WEB-O3022H

CIPer MODEL 30 EXP I/O MODULES - PRODUCT DATA

3 31-00239EFS-01

Specifications

Electrical

Rated input voltage: 20-30 VAC; 50/60Hz Power

consumption:

WEB-O9056H:

o207VA maximum for I/O module with all

connected loads.

o35 VA maximum for I/O module without any

load.

WEB-O3022H:

o87VA maximum for I/O module with all

connected loads.

o15 VA maximum for I/O module without any

load.

Operating Environment

Ambient temperature: -4 to 131°F (-20 to 55°C)

Storage temperature: -4 to 150°F (-20 to 65°C)

Humidity: 5% to 95% non-condensing

Inputs and Outputs

Analog Outputs (AO)

AOs are individually configurable for current or

voltage. Universal Inputs marked as UI-x/AO-x are

configurable as AOs.

Analog Current Outputs

Current Output Range: 4.0 to 20.0 mA

Output Load Resistance: 550 Ohms maximum

Analog Voltage Outputs

Voltage Output Range: 0.0 to 10.0 VDC Maximum

Output Current: 10.0 mA

Digital Outputs (DO)

Voltage rating: 20 to 30 VAC @ 50/60Hz

Digital Outputs type: Solid-State Relay

Current rating: 1.5A Continuous, 3.5A in-rush for

100 milliseconds

Universal Inputs (UI)

Flexible UI’s to connect external sensors like 20KNTC,

PT1000 and other resistive sensors.

Pulse Inputs:

Type: Dry contact

Frequency: 100Hz max,

Duty cycle: minimum 5 ms ON / 5 ms OFF

Table 2. Universal Inputs specifications

Input Type

Sensor Type

Operating Range

Room/Zone

Discharge Air

Outdoor Air

Temperature

20K Ohm NTC

-40° F to 199° F

(-40° C to 93° C)

Outdoor Air

Temperature

C7031G

-40° F to 120° F

(-40° C to 49° C)

C7041F

-40° F to 250° F

(-40° C to 121° C)

PT1000

(IEC751

3850)

-40° F to 199° F

(-40° C to 93° C)

TR23

Setpoint

Potentiometer

500 Ohm to

10,500 Ohm

50° F to 90° F

(10° C to 32° C)

Resistive Input

Generic

100 Ohms to 100K

Ohms

Voltage Input

Transducer,

Controller

0 - 10 VDC

Discrete Input

Dry Contact

closure

OpenCircuit ≥ 3000

Ohms

ClosedCircuit < 3000

Ohms

Status Indication LEDs

The expansion I/O modules indicate the device Power

and Fault status using the LEDs on top.

Standards and Approvals

•UL/CUL (E87741) listed under UL 60730-1 and CSA

E60730-1, UL 60730-2-9:2010.

•Meets FCC Part 15, Subpart B:2017, Class B (radiated

emissions) requirements.

•Meets Canada ICES-003:2016.

•EMC Directive: 2014/30/EU. Standards Applied:

oEN 61000-6:2005

oEN 61000-6-3:2007 + A1

oEN 60730-1: 2011, EN 60730-2-9: 2010

•RoHS Directive: 2011/65/EU.

oStandard EN 50581: 2012

Conformance Statement

This digital apparatus complies with CAN ICES-3 (B)/

NMB-3 (B).

FCC Notice

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1)

this device may not cause harmful interference,

(2)

this device must accept any interference received,

including interference that may cause undesired

operation.

CIPer MODEL 30 EXP I/O MODULES - PRODUCT DATA

Honeywell Building Technologies

Honeywell International Inc.

1985 Douglas Drive North

Golden Valley, MN 55422

customer.honeywell.com

31-00239EFS|Rev. 01 10-19

Safety Information as per EN60730-1

The Open System is intended for residential, commercial,

and light-industrial environments. The Open System is an

independently mounted electronic control system with

fixed wiring.

The WEB-O9056H and WEB-O3022H are suitable for

mounting in fuse boxes conforming with standard

DIN43880 and having a slot height of max. 1.77 inches

(45 mm).

It is suitable for panel rail mounting on 1.38 inches (35

mm) standard panel rail (both horizontal and vertical rail

mounting possible).

Table 3. Safety information as per EN-60730-1

Electric Shock

Protection

PELV

Pollution Degree

Pollution Degree 2, suitable for use in

industrial environments.

Installation

Class 3

Overvoltage

Category

24 V-powered controls: Category I

Rated Impulse

Voltage

330 VAC for Category I (SELV)

Automatic

Action

Type 1

Software Class

Class A

Purpose of control

Operating Control, Open Energy

Management Equipment.

Enclosure degree

of protection

IP20 (NEMA 1)

Ball-pressure

Test

Temperature

>75 °C for all housing and plastic

parts.

>125 °C in the case of devices

applied with voltage-carrying

parts, connectors, and terminals.

Electromagnetic

Interference

Tested at 230 VAC with the

modules in normal condition.

System

Transformer

Europe: safety isolating

transformers according to

IEC61558-2-6.

U.S.A. and Canada: NEC Class-2

transformers.

Mounting

The CIPer Model30 expansion I/O modules can be

mounted in any orientation on a DIN rail. Ventilation

openings are designed into the cover to allow proper

heat dissipation, regardless of mounting orientation.

When mounting on DIN rail, the locking clip present

on both I/O modules ensures accurate alignment of

connectors between all modules.

The controller can also be screw-mounted on a panel

using the four mounting tabs, accessible under the

covers. These mounting tabs may be broken off if

needed to save space when DIN rail mounting.

Note:

oAvoid mounting in areas where acid fumes or

other deteriorating vapors can attack the metal

parts of the controller, or in areas where

escaping gas or other explosive vapors are

present.

oMount in a position that allows clearance for

wiring, servicing and removal.

oFor complete mounting and wiring information,

refer to the CIPer Model 30 expansion I/O

Installation Instructions.

Este manual sirve para los siguientes modelos

Otros manuales de Hardware de computadora de Honeywell

Honeywell

Honeywell Gamewell Velociti AMM-4F Manual de usuario

Honeywell

Honeywell NX series Manual de usuario

Honeywell

Honeywell PW7K1R1E Manual del operador

Honeywell

Honeywell GENT VSINTM-PCB-UPG Manual de usuario

Honeywell

Honeywell RM7895 Series Manual

Honeywell

Honeywell HX3 Manual de usuario

Honeywell

Honeywell PX4ie Manual de usuario

Honeywell

Honeywell 66 Manual de usuario

Honeywell

Honeywell RM7838B Series Manual de usuario

Honeywell

Honeywell RS-485 Manual de usuario

Honeywell

Honeywell ALERTON AXM Manual de usuario

Honeywell

Honeywell PW7K1R1 Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario