Hologic Trident Manual de usuario
ENG-0034-T33, Rev. 002
TITLE DOCUMENT NUMBER REV
AW, MNL, TRIDENT
Q
UICK START GUIDE AW-05674 003
ARTWORK SIZE A SHEET 1 OF 1
REV AUTHORED BY DATE
J. SHARP 12/31/14
REV DRAFTED BY DATE
J. SHARP 12/31/14
PROPRIETARY INFORMATION:
The content of this document is the
exclusive property of Hologic and may
not, without prior written permission of
Hologic, be reproduced, copied or used
for any purpose whatsoever.
Artwork and Signature File for:
MAN-02099 “MNL, TRIDENT, QUICK START GUIDE”
Artwork consists of:
Two (2) 11 inch x17 inch sheet(s) attached.
MAN-02099 Revision 003, December 2014
Quick Start Guide
THE TASKBAR
1. Manage system alarm messages.
2. Access screens for Admin functions, logging out, editing user settings, and printing the patient list.
3. View job information and manage queues for the destination devices.
4. View system messages, clear alarms and faults, set system defaults, and view system information.
SYSTEM SHUTDOWN
1. Select the Log out button in the Select Patient screen.
2. Select the Shutdown button in the Log In screen.
SYSTEM CARE
General Cleaning Instructions (Refer to the Instructions for Use for full details.)
1. Apply a cleaning solution to a lint-free cloth. Do not spray or ow the liquid on any part of the unit.
2. Wipe the unit with the cloth.
3. Clean the Keyboard surfaces with a CRT wipe.
SYSTEM CALIBRATION
When the system displays a message to perform the calibration procedure, follow the on-screen prompts to
complete the procedure.
MAN-02099
Specimen Radiography System
1. Lock the Casters.
2. Connect to the network.
3. Connect to power.
4. Press the Computer ON button.
5. Select the Log In button.
Quick Start Guide
Refer to the User Guide for safety information and complete user instructions.
Refer to the corporate website for more facilities worldwide.
© Copyright Hologic 2014. All rights reserved. Printed in USA. This manual was originally written in English.
Hologic and the Hologic Logo are trademarks or registered trademarks of Hologic, Inc. Other trademarks registered or used by Hologic and its divisions and subsidiaries in the
United States and other countries include: Affirm, ATEC, C-View, Dimensions, DSM, Eviva, FAST Paddle, Hologic Connect, HTC, M-IV, MultiCare, Selenia, Smart Paddle,
StereoLoc, TechMate, and Trident. Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and other countries. Any other
product and company names mentioned herein are the trademarks or registered trademarks of their respective owners.
Europe
(EU Representative)
Hologic NV
Leuvensesteenweg 250A
1800 Vilvoorde, Belgium
Tel: +32.2.711.4680
Fax: +32.2.725.2087
Corporate Headquarters
35 Crosby Drive,
Bedford, MA 01730-1401 USA
Tel: +1.781.999.7300
Sales: +1.781.999.7453
Fax: +1.781.280.0668
www.hologic.com
Manufacturer
36-37 Apple Ridge Road
Danbury, CT 06810 USA
Quick Start Guide
MAN-02099 Revision 003, December 2014
1. Put the specimen in the center of the surface:
• 2.0x for 2x magnification image
• 1.5x for 1.5x magnification image
• 1.0x for Contact image
2. Close the door. The Door indicator LED on the Cabinet
control panel turns green.
NOTE: If the door is opened during the exposure, the
exposure stops and the green Door indicator LED turns off.
• To delete an acquired image, select the thumbnail
image on the left, then select the trash can icon.
• To Archive, Export, or Print an image, select the function,
then select from the options in the function screen.
• To enhance the image, select the Tools tab, then select
the tool. Below are the tools that are used frequently.
1. The Mag tool magnifies a section of the image.
2. The Zoom tools magnifies the whole image.
3. The Window/Level tools adjust the brightness and
contrast of the image.
4. The Enhanced Visualization button has a slider to
adjust the image sharpness.
5. The Camera button for screen capture.
To add notes to the image which become part of the patient
demographics text on the image:
1. Select the Comments tab.
2. Select the Add button.
3. Select an option from the image list.
4. Type other comments in the Additional Item area.
5. Select the OK button.
Select a tool on the Annotations tab to do the following:
1. Draw an elliptical pattern in the image.
2. Use an arrow to point to an area of interest.
3. Draw free-form in the image.
4. Draw a text box to make a note.
1. Turn the key to the Unlocked position.
2. When the LEDs for Power, Door, and Ready are green,
press the X-RAY button.
3. To acquire additional images, press the X-RAY button.
The images are accepted automatically and saved to the
local system drive.
4. Turn the key to the Locked position when the exam
is completed.
• To end a procedure, select the Close Patient button on the Procedure screen.
• The images are transmitted to outputs that were configured during installation.
• Make sure the key is in the Locked position.
Otros manuales para Trident
1
Otros manuales de Equipo médico de Hologic
Hologic
Hologic Acessa ProVu Manual de usuario
Hologic
Hologic Aquilex Manual de usuario
Hologic
Hologic selenia dimensions Manual de usuario
Hologic
Hologic ThinPrep Manual de usuario
Hologic
Hologic TruNode Manual de usuario
Hologic
Hologic Genius Manual de usuario
Hologic
Hologic Trident HD Manual de usuario
Hologic
Hologic NovaSure Advanced Manual de usuario
Hologic
Hologic SUPERSONIC IMAGINE AIXPLORER MultiWave Guía de configuración
Hologic
Hologic QDR 4500 Manual de usuario
Hologic
Hologic Aquilex Manual de usuario
Hologic
Hologic Aquilex Manual de usuario
Hologic
Hologic Faxitron CT Manual de usuario
Hologic
Hologic Cenova R2 2.0 Manual de usuario
Hologic
Hologic Faxitron Path Manual de usuario
Hologic
Hologic Affirm Manual de usuario
Hologic
Hologic selenia dimensions Manual de usuario
Hologic
Hologic Affirm Manual de usuario
Hologic
Hologic ATEC SAPPHIRE Manual de usuario
Hologic
Hologic Brevera Hoja de información del producto
