HNE VARIO 9 Carbon Manual de usuario
OPERATING INSTRUCTIONS
CARBON
CARBON
HIGH - PERFORMANCE FOAM EXTINGUISHER
MADE IN GERMANY www.hne.ag
CONTENTS Page
VARIO CARBON
Important basic information...............
Symbols and warnings.......................
Unpacking.......................................
Overview.........................................
Storage...........................................
Extinguishing agents.........................
Filling..............................................
Replacing the pressure bottle..............
Applying the system..........................
Foam mode selection.........................
Jet gun............................................
Dual mode gun.................................
Service and maintain.........................
Legal inspections..............................
Pressure safety.................................
Technical data..................................
Exploded drawing.............................
Replacement parts............................
Warranty.........................................
Declaration of conformity...................
Contact...........................................
Servicing notes.................................
1
2
2
3
4
4
5 - 6
7 - 8
9
10
11
12
13
14
14
15
16
17
18
19
20
21
MADE IN GERMANY
Important basic information
thank you for choosing one of our products. You have acquired
premium class fire fighting equipment, worldwide known for
superior performance and highest quality.
This manual will help you to keep operational readiness and
lifespan of your HNE-device on highest level and to take full
advantage of its technical superiority. Please read it carefully
before using the extinguisher for the first time. In case of
questions or technical problems, please contact us.
The versatile VARIOCARBON is a compact and weight-optimized
system for professional use. The extra high and constant
working pressure offers excellent fire rating with increased
safety and capabilities for fire fighters during action.
Dear customer,
www.hne.ag
This manual is an important part of the extinguisher. It refers
to safe and proper use of the device in the interest of safety.
It has to be accessible for users and must be passed on in
case of sale.
We assume no liability for injuries, damage or malfunctions,
which arise due disregard of these user instructions.
The warranty for this device applies for flaws of material,
assembly, quality and function. It is void if the device is not
applied, operated and maintained as described.
Without our written permission, no content of this manual
shall be reproduced or forwarded to others. All technical
specifications and illustrations are subject to copyright.
Technical modifications are subject to change without notice.
VARIO CARBON
MADE IN GERMANY
Symbols and meaning
Important information is highlighted with the following icons.
Please note them with particular attention in the interest of safety.
Indication of possible danger. Disregard can result in
damage or hazard to device, vicinity, operator or other
persons.
Important information for proper use and handling of
extinguisher, necessary tools, accessories and supplies.
Warning of possible hazards by pollutants and chemicals.
Legal requirements for protection of environment must
be observed.
Additional information, advice and recommendations.
•Extinguisher with bottle holder, hose and jet gun
•CFRP pressure cylinder, 2 Liter/300 bar
•Plastic bottle with foam concentrate, portioned for first filling
•Ergonomic backpack, already mounted (optional)
•Second bottle holder for breathing apparatus (optional)
Scope of delivery
Unpacking
The whole packing material is recyclable, please dispose
of it in an environmentally responsible way. Check the
condition of packaging and content upon delivery and
contact us immediately in case of damage to the device
due transport.
www.hne.ag
VARIO CARBON
Overview VARIO 9
(VARIO 13 similar)
Container lid
Compressed air
cylinder
2'nd bottle holder
(optional)
Bottle
valve
Pressure
reducer
Vent valve
Pressure
gauge
Carrying frame
(optional)
Jet gun
MADE IN GERMANY
Adjustable
air inlets
Foam mode selector
Safety catch
www.hne.ag
Trigger
VARIO CARBON
VARIO 9
Storage
In filled condition the extinguisher must be stored in an upright
position. The environment should be dry, cool and dust-free.
Avoid direct sunlight; in the long run, ultraviolet light harms
plastic, rubber and textiles. If filled with regular extinguishing
agent, do not expose the device to temperatures near freezing
point or below. Frozen extinguishing media causes irreparable
damage! Use frost proof additives for cold conditions.
Extinguishing agents
Clean tap water represents the simplest way of filling for non-
polluting and cost-free user training. For foam generation, fill
the device with a mixture that is listed on the containers label.
As suitable extinguishing agents we recommend:
Regular range of temperature: +5 to +60° C
With frost proof extinguishing agent: -25 to +60° C
especially for use in portable extinguishers,
against fires of class A + B.
optimized for HNE-high pressure technology to achieve
superior extinction ratings. For fire class A + B.
MG 6-30
Premix
HNE
63 A
SC-6
AFFF 1%
AFFF 6%
Ready-for-use agent with -30°C freeze protection.
Suitable for fire class A + B.
most common foam agent against fires of class A + B.
MADE IN GERMANY
Do not store the filled extinguisher in horizontal position.
NOTE: With the use of unlisted extinguishing agents,
the device no longer meets the EN-3 approval. In this
case, successful fire extinction and the safety of the
specified minimum distance to electrical installations
can not be guaranteed by HNE!
www.hne.ag
VARIO CARBON
VARIO 9
Avoid spilling of extinguishing agent. Flush affected
surfaces and components with water.
Empty the container completely before filling.
Dispose of chemicals with ecological responsibility.
Do not use any leftover extinguishing fluid again.
Never overfill the container.
The threads of container and lid have to be free from
any dirt. Clean them if necessary and lubricate with
silicon grease.
Always wear goggles, gloves and apron when dealing
with extinguishing agent. The chemicals can cause skin
irritation or allergies.
After contact with eyes or mouth, immediately flush out
with plenty of clean water.
Also observe the safety instructions in the data sheet of
the extinguishing agent manufacturer.
Extinguishing agents are polluting and hazardous to
health. They must not seep into soil or sewer system.
Use a suitable container to dispose of it in an
environmentally friendly way.
The extinguisher achieves optimal performance only when
accurately filled. Prepare things thoroughly and perform all steps
with necessary care. We recommend a clean and steady work
area with water supply.
Filling - Before you start:
MADE IN GERMANY
We recommend to mark the extinguisher after filling as
ready for use. For example, a paper seal can state the
date and type of extinguishing agent.
www.hne.ag
VARIO CARBON
The VARIO 9/13 requires a total filling of exactly 9.0/13.0 liters,
consisting of clean tap water. If used, the amount of the foaming
additives depends on the particular type. Exact mixing details are
listed on the container label and must be strictly observed.
2. Turn the upper knob into open
position ( ) for venting.
1. Make sure that the valve of the
compressed air cylinder is closed.
3. Press and hold the trigger of the jet
gun until no more hissing is heard.
Relieve the system always completely from residual
pressure before opening the container lid. Even after
complete discharge of the extinguisher, new pressure
can occur due rising temperature.
4. Place the device on a level surface
and remove the pressure bottle (see
next page). Then unscrew the lid.
Venting the system:
Correct order of liquids:
Closing the lid:
A thin layer of silicon grease on thread and
sealing surface increases lifetime and
facilitates opening. Screw the lid tightly and
turn the vent valve into closed position ( ).
Silicon
grease
Amount and mixing ratio:
At first, pour the proper amount of water into the container with
the help of a funnel. Then add the extinguishing concentrate.
The liquids are self-mixing, stirring is unnecessary.
MADE IN GERMANY
Tightening the lid by hand is sufficient. Do not use tools.
www.hne.ag
VARIO CARBON
Pressurized vessels represent significant hazard for user and
vicinity in case of negligence or mishandling. Always treat filled
air cylinders and charged extinguishers with due diligence.
internal thread
air outlet
external thread
O-ring
MADE IN GERMANY
If the air cylinder is opened by mistake, close it again and
discharge the pressure by opening the vent valve of the
lid. The remaining capacity of the air cylinder is still
sufficient. Refill or replace the bottle in case of recurrence.
If necessary, clean the threads of pressure tank and air cylinder
connection with compressed air or a small brush. Do not
lubricate. Check the condition of the O-ring before screwing the
regulator to the compressed air cylinder.
Replacing the pressure bottle
www.hne.ag
Do not use tools to tighten the hand screw at the air
cylinder connection.
Partially emptied air cylinders must be recharged or
replaced before the next use of the extinguisher.
The threads of air cylinder and regulator must be free of
dirt and debris. Clean if necessary, but do not lubricate.
Check the condition of the O-ring at the pressure
regulator. Replace it in case of cracks or loss.
Do not open the cylinder valve before the next use.
Never overfill an air cylinder. Maximum pressure: 300 bar.
Use approved pressure bottles of same size only.
VARIO CARBON
Replacing the pressure bottle
A compressed air cylinder with 2.0 Liter volume serves as
propellant. On delivery, the cylinder is empty and needs to be
filled with a suitable air compressor. The maximum pressure of
300 bar must not be exceeded.
1. Close the cylinder valve
completely by turning it clockwise.
3. Disconnect the pressure reducer
by turning the knurled screw
anti-clockwise.
4. Open the retaining strap and
remove the cylinder.
5. Place a fully pressurized cylinder into the mounting and fix it
with the retaining strap.
6. Reconnect the pressure regulator to the new cylinder.
4
5
empty
full
2. Actuate the jet gun until any
residual pressure is relieved.
MADE IN GERMANY
To avoid accidental opening and to indicate readiness,
we recommend marking the hand wheels of filled
cylinders with paper seal.
www.hne.ag
VARIO CARBON
1
3
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Extintor de incendios de HNE
Manuales populares de Extintor de incendios de otras marcas
Housegard
Housegard PE2TGH Manual de usuario
Amerex
Amerex 322 Manual de usuario
IFEX Technologies
IFEX Technologies IFEX 3000 Manual de usuario
CaptiveAire
CaptiveAire DI-PSP Manual de usuario
First Alert
First Alert FEBRA5-6 Instrucciones de instalación
First Alert
First Alert FE10GO Instrucciones de instalación
First Alert
First Alert FESA5 Manual de usuario
Task Force Tips
Task Force Tips Extend-A-Gun XG12 Manual de programación
Sea-Fire
Sea-Fire FM200 Manual de servicio
SenseTek
SenseTek CEA10 Manual de usuario
Tyco Fire Protection Products
Tyco Fire Protection Products FAST2000/2 Manual de usuario
FireFlex Systems Inc.
FireFlex Systems Inc. ICAF System Manual