HMS Networks Anybus Manual de usuario
Anybus®Industrial WLAN Access Point
USER MANUAL
SCM-1202-155 1.0 en-US ENGLISH
Important User Information
Disclaimer
The information in this document is for informational purposes only. Please inform HMS Industrial Networks of any
inaccuracies or omissions found in this document. HMS Industrial Networks disclaims any responsibility or liability
for any errors that may appear in this document.
HMS Industrial Networks reserves the right to modify its products in line with its policy of continuous product
development. The information in this document shall therefore not be construed as a commitment on the part of
HMS Industrial Networks and is subject to change without notice. HMS Industrial Networks makes no commitment
to update or keep current the information in this document.
The data, examples and illustrations found in this document are included for illustrative purposes and are only
intended to help improve understanding of the functionality and handling of the product. In view of the wide range
of possible applications of the product, and because of the many variables and requirements associated with any
particular implementation, HMS Industrial Networks cannot assume responsibility or liability for actual use based on
the data, examples or illustrations included in this document nor for any damages incurred during installation of the
product. Those responsible for the use of the product must acquire sufficient knowledge in order to ensure that the
product is used correctly in their specific application and that the application meets all performance and safety
requirements including any applicable laws, regulations, codes and standards. Further, HMS Industrial Networks will
under no circumstances assume liability or responsibility for any problems that may arise as a result from the use of
undocumented features or functional side effects found outside the documented scope of the product. The effects
caused by any direct or indirect use of such aspects of the product are undefined and may include e.g. compatibility
issues and stability issues.
Anybus®Industrial WLAN Access Point User Manual SCM-1202-155 1.0 en-US
Anybus®Industrial WLAN Access Point User Manual SCM-1202-155 1.0 en-US
Table of Contents Page
1 Preface ................................................................................................................................. 3
1.1 About This Document .......................................................................................................3
1.2 Document Conventions.....................................................................................................3
1.3 Trademarks.....................................................................................................................4
2 Safety ................................................................................................................................... 5
2.1 General Safety Instructions................................................................................................5
2.2 Intended Use...................................................................................................................5
3 Preparation.......................................................................................................................... 6
3.1 Support and Resources .....................................................................................................6
4 Installation........................................................................................................................... 7
4.1 Pole Mounting.................................................................................................................7
4.2 Wall Mounting.................................................................................................................8
4.3 DIN Rail Mounting............................................................................................................9
4.4 Connecting Ground Screw .................................................................................................9
4.5 Connecting Access Point IP30 to Power.............................................................................. 10
4.6 Connecting Access Point IP 67 to Power............................................................................. 12
4.7 Connecting to Ethernet ................................................................................................... 13
4.8 Connecting Antennas...................................................................................................... 14
5 Configuration..................................................................................................................... 15
5.1 Before You Begin Configuration........................................................................................ 15
5.2 Accessing the Web Management Interface ......................................................................... 15
5.3 Configure the Country/Region Settings .............................................................................. 16
5.4 Submit and Save Configuration......................................................................................... 16
5.5 Factory Reset ................................................................................................................ 17
5.6 System ......................................................................................................................... 18
5.7 Ethernet Port ................................................................................................................ 21
5.8 Wireless LAN................................................................................................................. 22
5.9 Security........................................................................................................................ 29
5.10 Warning ....................................................................................................................... 33
5.11 Diagnostics ................................................................................................................... 34
5.12 Backup/Restore ............................................................................................................. 36
5.13 Firmware Upgrade ......................................................................................................... 37
5.14 Reset to Default............................................................................................................. 38
Anybus®Industrial WLAN Access Point User Manual SCM-1202-155 1.0 en-US
6 Verify Operation................................................................................................................ 39
7 Technical Data ................................................................................................................... 41
7.1 Technical Specifications................................................................................................... 41
A Wireless Technology Basics .............................................................................................. 43
Preface 3 (44)
1 Preface
1.1 About This Document
This document describes how to install and configure the Anybus Industrial WLAN Access Point.
For additional documentation and software downloads, FAQs, troubleshooting guides and
technical support, please visit www.anybus.com/support.
1.2 Document Conventions
Numbered lists indicate tasks that should be carried out in sequence:
1. First do this
2. Then do this
Bulleted lists are used for:
• Tasks that can be carried out in any order
• Itemized information
►An action
→ and a result
User interaction elements (buttons etc.) are indicated with bold text.
Program code and script examples
Cross-reference within this document: Document Conventions, p. 3
External link (URL): www.hms-networks.com
WARNING
Instruction that must be followed to avoid a risk of death or serious injury.
AVERTISSEMENT
Instruction à suivre pour éviter tout risque de décès ou de blessure grave.
Caution
Instruction that must be followed to avoid a risk of personal injury.
Attention
Instruction à suivre pour éviter tout risque de blessure.
Instruction that must be followed to avoid a risk of reduced functionality and/or damage
to the equipment, or to avoid a network security risk.
Additional information which may facilitate installation and/or operation.
Anybus®Industrial WLAN Access Point User Manual SCM-1202-155 1.0 en-US
Safety 5 (44)
2 Safety
2.1 General Safety Instructions
Caution
Ensure that the power supply is turned off before connecting it to the equipment.
Attention
Assurez-vous que l’alimentation électrique est coupée avant de la brancher sur
l’équipement.
Connecting power with reverse polarity or using the wrong type of power supply may
damage the equipment. Make sure that the power supply is connected correctly and of
the recommended type.
This equipment contains parts that can be damaged by electrostatic discharge (ESD). Use
ESD prevention measures to avoid damage.
2.2 Intended Use
The intended use of this equipment is to provide wireless LAN connectivity. The equipment
receives and transmits data on various physical levels and connection types.
If this equipment is used in a manner not specified by the manufacturer, the protection provided
by the equipment may be impaired.
Anybus®Industrial WLAN Access Point User Manual SCM-1202-155 1.0 en-US
Preparation 6 (44)
3 Preparation
3.1 Support and Resources
For additional documentation and software downloads, FAQs, troubleshooting guides and
technical support, please visit www.anybus.com/support.
Have the product article number available, to search for the product specific support web page. You find
the product article number on the product cover.
Anybus®Industrial WLAN Access Point User Manual SCM-1202-155 1.0 en-US
Installation 7 (44)
4 Installation
4.1 Pole Mounting
Option for access point IP67
1. Use the four included screws and washers to attach the mounting bracket to the access
point.
2. Insert the two included metal bands into the mounting bracket strap slots.
3. Position the metal bands and the mounting bracket on the pole as needed.
4. Tighten the metal bands to the pole and lock them by tightening the screws.
Ensure that the access point is firmly secured to the pole.
Anybus®Industrial WLAN Access Point User Manual SCM-1202-155 1.0 en-US
Installation 8 (44)
4.2 Wall Mounting
Option for access point IP67
1. Use the four included screws and washers to attach the mounting bracket to the access
point.
2. Drill four holes in the wall and insert wall anchors.
3. Use four screws to attach the mounting bracket to the wall.
Anybus®Industrial WLAN Access Point User Manual SCM-1202-155 1.0 en-US
Otros manuales para Anybus
2
Tabla de contenidos
Otros manuales de Punto de acceso inalámbrico de HMS Networks
