HMM hLine Manual de usuario
Seite 2 von 41
Benutzer Handbuch hLine Gateway
Contents Page
1introduction........................................................................................................................ 3
2tasks of the gateway........................................................................................................... 3
3installation.......................................................................................................................... 3
3.1 Windows XP operating system......................................................................................... 3
3.1.1 installation with an ANT USB Stick ..................................................................... 4
3.1.2 installation with a BLE USB Stick: ....................................................................... 8
3.1.3 Installation with an ANT and BLE USB Dongle: ................................................ 15
3.2 Operating systems Windows Vista, Windows7 und Windows 8 ............................. 22
3.2.1 Installation with an ANT USB Stick ................................................................... 22
3.2.2 Installation with a BLE USB Stick ...................................................................... 26
3.2.3 Installation with an ANT und BLE USB Dongle: ................................................ 30
4Registration ...................................................................................................................... 36
5Sub-Items of the Gateway................................................................................................ 36
5.1 About........................................................................................................................ 36
5.2 Settings..................................................................................................................... 37
5.3 Log Dates .............................................................. Fehler! Textmarke nicht definiert.
5.4 Devices ..................................................................................................................... 39
5.5 Seriennummer Info .................................................................................................. 40
5.6 Autostart .................................................................................................................. 41
5.7 Popup notifications .................................................................................................. 41
5.8 Sign out..................................................................................................................... 41
6Exit .................................................................................................................................... 41
Seite 3 von 41
Benutzer Handbuch hLine Gateway
1Introduction
Thank you for choosing the hLine gateway. With this gateway, you can now transfer your
vital data in the hLine-online.com portal and manage them. This manual will guide you step
by step through the gateway.
If you need further assistance or have questions, please contact our Support Team under
2Tasks of the gateway
The hLine gateway is used for transmission of the measured vital data from a meter to your
computer, tablet, etc. These vital data are transferred by instruments which have an ANT or
BLE modulus. The data is transmitted via the hLine gateway to the server, which updates the
data in hLine-online.com portal regularly.
3Installation
You have to download the file "Setup hLine" hLine for the gateway from
http://www.hmm.info/downloads.html. Then, run the file and follow the remaining steps of
the installation wizard:
Important:
Please insert the dongle (it does not matter which one you have) only AFTER completing the
installation and restarting the computer AFTER the USB interface.
3.1 Windows XP operating system
The following installation procedures (subdivided according to the different types of dongle)
are designed to be installed on a Windows XP operating system.
Step 1
Seite 4 von 41
Benutzer Handbuch hLine Gateway
3.1.1 Installation with an ANT USB Dongle
After starting the setup, you can
select the language, which has to
be used during the installation,
and click "OK".
Here you see the "Welcome" -
window of the Setup Wizard.
If you wish to continue, click
"Continue". If you want to cancel
the installation, click "Cancel.
In the next step you can select
your USB stick (here ANT). After
the selection you will get to the
next selection window by clicking
on "Next".
step 4
step 2
step 3
step 3
Seite 5 von 41
Benutzer Handbuch hLine Gateway
Here you can choose where you
want to install the hLine gateway.
Click on "Next" to go on to the next
selection window.
Here you can select which
components you want to install.
You enter the next selection
window after clicking on "Next".
Here you can choose where the
program shortcuts have to be
created. By clicking on "Next" you
will reach the next selection
window.
step 5
step 7
step 6
Seite 6 von 41
Benutzer Handbuch hLine Gateway
Here you can set whether a symbol
of hLine Gateways has to be created
on the desktop and / or at the Quick
Launch bar. After your selection you
will enter the next selection window
by clicking "Next".
To start the installation, click on
"Install".
To complete the setup, the Windows
Installer 3.1 and. NET Framework 3.5
Service Pack programs are needed.
Click on "Yes".
step 8
step 9
step 10
Seite 7 von 41
Benutzer Handbuch hLine Gateway
Here you can choose whether you
want to restart now or later your
computer.
We recommend that you restart
the computer now.
After restarting the computer
please insert the dongle into the
USB port.
Then, this window will appear.
This wizard installation for the
ANT USB software is completed.
Click "Next" to continue.
step 11
step 12
Seite 8 von 41
Benutzer Handbuch hLine Gateway
To complete the wizard, click
"Finish".
To start the Gateway, please click
on the icon.
3.1.2 Installation with a BLE USB Stick:
After starting the setup, you can
select the language, which has to be
used during the installation, and
click "OK"
step 13
step 14
step 2
Seite 9 von 41
Benutzer Handbuch hLine Gateway
Here you see the "Welcome" -
window of the Setup Wizard.
If you wish to continue, click
"Continue". If you want to
cancel the installation, click
"Cancel.
Here you can select your USB
stick (here BLE). After the
selection you will reach the next
selection window by clicking on
"Next".
Here you can select which
components have to be
installed. After the selection
you enter the next selection
window by clicking on "Next".
step 4
step 3
step 5
Seite 10 von 41
Benutzer Handbuch hLine Gateway
Here you can select where the
hLine Gateway will be installed.
Click on "Next" to reach the next
selection window.
Here you can set whether a
symbol of hLine gateways has
to be created on the desktop
and / or the Quick Launch bar.
After your selection you reach
the next selection window by
clicking on "Next".
step 6
step 7
Tabla de contenidos
Manuales populares de Puerta de otras marcas
LST
LST M500RFE-AS Manual de usuario
Kinnex
Kinnex Media Gateway Manual de usuario
2N Telekomunikace
2N Telekomunikace 2N StarGate Manual de usuario
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Manual de usuario
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Manual de usuario
Telsey
Telsey CPVA 500 - SIP Manual de usuario
