4.4 Height Input and BMI
Press BMI/Height to enter height input, it display H 170 (default of cm and display A’BC.D” on lb unit),
use the keys with arrows to input the height value.
Press BMI/Height to confirm the height and it will display the BMI value, such as B 23.6.
Press UNIT/Weight to return the weight display
4.5 Date/Time
Press PRINT/Time for 2 seconds to enter date/time set and use the keys with arrows to modify it and
press BMI/Height to confirm
4.6 Print
Short pressPRINT/Time to print the receipt (if the scale connected with a printer) and the format as
below:
TICKET!No.:!!!00005!
G.W:! ! 78.5Kg!
T.W:! ! 2.0Kg!
N.W:! ! 76.5Kg!
H:! ! 180cm!
BMI:! ! 23.6! !
29/10/2015!!17:50!!
Press M+ key andON/T at the same time, it will display UF - 1 , press ON/T or MR/MC to
shift it from UF - 1 to UF - 9 , press M+ to enter and configure it.
5.1 Internal A/D Value and Battery Volume
UF - 1
Press BMI/Height to view the internal A/D value of the scale
Press BMI/Height again to display the voltage of the battery.
Press BMI/Height again to change for next set or press UNIT/ESC to quit and back to normal weighing
mode
5.2 Hi/Lo/Ok Checkweigh Function
For personal and household use, you can set a target weight as you want to reach, if the weight below or
more than it, it will give an indication.
UF – 2 Press buttons with arrow to move and change the digits.
Press BMI/Height to set the Lo value (the lower limitation) – 000.00L
Press BMI/Height to set the Hi value (the top limitation) – 000.00h
Press BMI/Height to change the working mode of buzzer of Hi/Lo/Ok – o 000
Remark
o 0 0 0
o A B C
A=0 Stable but no need to buzz
A=1 Stable to buzz
B no function, keep it as default and no change
C=0 Buzzer off
